496721
2
Zoom out
Zoom in
Previous page
1/39
Next page
2
Go to “Settings for audio device” in the settings menu:
1. Watch the indicator bar and speak into the headset, when you see movement in the bar the headset is installed
properly.
2. You can adjust the volume to your own desire.
NOTE: After pairing the PS3
®
and the headset once, you do not have to repeat it again when you want to use it the next
time.
Change to use the other ear:
You can wear the headset on the left or right ear. To change the headset to another ear:
1. Lift the top of the ear hook off the upper hinge pin.
2. Pull the hinge pin away and remove it from headset.
3. Change the direction.
4. Fix the ear hook on the headset again.
Hinge Pin
Pull Earhook Up
Call functions for cell phone use:
End a call Press the multifunctional button
Receive a call Press the multifunctional button
Reject a call Press and hold the multifunctional button for 2 seconds
Transfer a call from the phone to the headset Press and hold the Volume+ button
NOTE: The headset supports both hands free and headset proles. Accessing call functions depends upon which prole
your phone supports. See your phone’s user guide for more information. The indicator light provides information about
your headset status.
With the charger plugged in
Headset status Headset indicator
Red indicator on Charging in progress
Red indicator off Charging complete
With no charger plugged in
Headset status Headset indicator
Off Power off
On (blue & red Indicator ash in sequence) Paring mode
Blue & red indicator stop ashing Pairing successful
Blue indicator ashes (0.1sec on, 2.9sec off) Connected (on a call)
Blue indicator ashes (0.1sec on, 2 .9sec off) Standby (free)
Red indicator ashes Low battery
ENGLISH
Functions:
1. Earhook 5. Multifunctional button
2. Speaker 6. Charging socket
3. Volume up button 7. Indicator light
4. Volume down button 8. Microphone
Charging the headset:
1. Plug the USB charger into the socket on the side of the headset. The red indicator light turns on when the battery is
charging. It may take up to 1 minute before the light turns on. When the battery is fully charged, the red indicator will
turn off automatically.
2. Unplug the USB charger from the headset.
NOTE:
- You cannot use the headset while the battery is charging.
- Charge the battery for eight hours before you use the headset for the first time.
- Normal charging time is 2 hours.
Turning the headset on/off
To turn the headset on, press and hold the multifunctional button until the indicator light flashes blue and red. Then,
release the button.
To turn your headset off, press and hold the multifunctional button until the indicator light flashes rapidly. After you
release the button the headset will turn off.
NOTE: After 10 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode.
Installation of the headset on a PS3
®
:
The PS3
®
Bluetooth
®
function is turned off by default. To use the headset on the PS3
®
follow the steps below:
1. Turn on your PS3
®
and go to the settings menu.
2. Select “Peripheral device settings” and go to “Register Bluetooth
®
device”.
3. Then select “Register headset” and let the PS3
®
search for devices.
4. Switch your headset to pairing mode by pressing the multifunctional button for 6 seconds. The blue/red indicator
flashes in sequence until the headset pairs with your PS3
®
.
5. Select the headset from the PS3
®
menu, enter the password: “0000” and confirm.
6. Then go to “Settings for audio device” in the settings menu.
7. Go to “Input device” and select the headset.
8. Go to “Output device” and select “Standard device”.
9. Select “Confirm” and the headset is ready for use.
NOTE: When the headset is successfully paired with your PS3
®
, the blue light indicator lights up steadily without the red
light indicator ashing.
Test and use the headset:
Your PS3
®
and headset are now paired and the headset is ready to use in on-line games. To conrm they are operating
properly:
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic GAMPS3-BLUETH1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic GAMPS3-BLUETH1 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info