570409
22
Zoom out
Zoom in
Previous page
1/404
Next page
ENGLISH
22
TROUBLESHOOTING
Problem Possible causes What to do
The display on the front
panel does not light up.
Main cable is not
connected.
Check that the main cable
is plugged into the power
socket.
No sound or picture, but
the front panel shows
red light.
The receiver is in standby
mode.
Press the standby button.
No sound or picture. No signal or weak signal.
Check the cable
connections, antenna
and other equipment
connected between the
antenna and the receiver.
Bad picture/blocking
error.
Signal is too strong.
Connect a signal
attenuator to the antenna
input.
Antenna noise factor
too high.
Change to an antenna
with lower noise factor.
The antenna is faulty. Change the antenna.
The picture is not
displayed on the screen,
when switched on.
The system is connected
by RF leads.
Check the UHF channel
xed in your system and
tune the UHF channel
properly.
There is interference
on your terrestrial
programme or video
signal.
The system is connected
by RF leads and the
output programme of
the receiver interferes
with an existing terrestrial
programme or Video
signal.
Change the receiver
output program to a
more suitable program,
or connect the system by
SCART leads.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic DVB-T2 FTA10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic DVB-T2 FTA10 in the language / languages: All languages as an attachment in your email.

The manual is 8,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info