508785
8
Zoom out
Zoom in
Previous page
1/93
Next page
8
Single Satellite Search
1. Satellite: Press the keys to select the circled satellite. Or press the OK key to open the
drop-down list to select the desired satellite. Press OK key to confirm.
2. FTA Only: Press the keys to select between Yes and No.
3. Scan Channel: Press the keys to select between TV+Radio, TV Channel and Radio.
4. Network Search: Select No or Yes. This item turns grey when Auto Scan is selected in the
following Scan mode item.
5. Scan Mode: Press the keys to select between Auto Scan and Preset Scan. Auto Scan is
a blind scan, while Preset Scansearches for the preset frequencies.
6. Search: Press the OK key to start searching.
Factory Settings
Press the OK key to enter the Factory Setting window.
Select the Yes button and press the OK key to return to the factory settings. All searched channels
and set information will be erased.
Select the No button and press the OK key to cancel this operation. Press the MENU or EXIT key to
cancel and exit.
Upgrade by USB
1. Upgrade File: Show the Upgrade File.
2. Upgrade Mode: Select between allcode, maincode, defaultdb, userdb and Dump. When switching
the upgrade mode, “Upgrade File” will show the corresponding file according to the table below:
Upgrade Mode File feature
All code: File named as “*.abs”
Main Code: File named as “*.abs”
Userdb: File named as “*.abs”, the
picture will be used as
both radio back and menu
back
Default db: File named as “*.abs”
Select the upgrade mode and upgrade file to start the upgrade by USB.
3. Press the OK key on the start button to start receiving data from the USB device. When the USB
device is not connected, this item is grey and you cannot edit it at this moment.
TROUBLESHOOTING
Problem Possible causes What to do
The display on the front panel
does not light up.
Main cable is not connected.
Check if the main cable is
plugged into the power socket.
No sound or picture, but the
front panel shows red light.
The receiver is in standby mode. Press the standby button.
No sound or picture.
The satellite dish is not pointing
at the satellite.
Adjust the dish. Check the signal
level in the Antenna Setup menu.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic DVB-S2 REC20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic DVB-S2 REC20 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info