508784
9
Zoom out
Zoom in
Previous page
1/95
Next page
9
TROUBLESHOOTING
Problem Possible causes What to do
The display on the front panel
does not light up.
The main cable is not
connected.
Check if the main cable is
plugged into the power socket.
No sound or picture, but the
front panel shows red light.
The receiver is in standby
mode.
Press the standby button.
The satellite dish is not pointing
at the satellite.
Adjust the dish. Check the signal
level in the Antenna Setup
menu.
No sound or picture.
No signal or weak signal.
Check the cable connections,
the LNB and other equipment
connected between the LNB and
the receiver, or adjust the dish.
The satellite dish is not pointing
at the satellite.
Adjust the dish.
Signal is too strong.
Connect a signal attenuator to
the LNB input.
Satellite dish is too small. Change to a larger dish.
LNB noise factor is too high.
Change to an LNB with lower
noise factor.
Bad picture / blocking error.
The LNB is faulty. Change the LNB.
There is no picture on the
screen when the device is
switched on.
The system is connected by RF
leads.
Check the UHF channel fixed in
your system and tune it properly.
There is interference on the
digital satellite channels, an
existing terrestrial channel or a
video signal.
The system is connected by RF
leads and the output channel of
the receiver interferes with
existing terrestrial channels or a
video signal.
Change the receiver output
channel to a more suitable
channel, or connect the system
by SCART leads.
The battery is exhausted. Change the battery.
The RCU is not working.
The RCU is incorrectly aimed.
Aim the RCU at the receiver, or
check if nothing is blocking the
front panel.
Note:
If you have tried all of the actions suggested above and the problem is still not solved, please contact
your dealer or service provider.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic DVB-S2 REC10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic DVB-S2 REC10 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info