570504
2
Zoom out
Zoom in
Previous page
1/57
Next page
2
ENGLISH
Introduction
• Features
• System requirements
• Installing the hardware device
• Installing the software driver
• Connections
• Performance
• Package contents
• Disclaimer
Introduction:
The new USB 3.0 standard is 10 times faster then USB 2.0. This PCI express card enables you to use this speed to
the fullest. It’s backwards compatible with USB 2.0 (480 Mbps) and USB 1.1 (1.5 Mbps) so you can still use your old
hardware. Move large les quickly from and to external storage devices such as HDDs, digital cameras and other USB
devices.
Features:
• 2x Super-Speed USB3.0 (5Gbps) connections.
• NEC UPD720200 chipset.
• Compliant with PCI Express Base Specications 2.0.
• Compliant with xHCI (eXtensible Host Controller Interface) specications Revision 0.95.
• Backwards compatible with USB2.0 High-Speed (480Mbps), USB1.1 Low-Speed (1.5Mbps).
• Bus interface: PCI-Express.
• 4-pin power connection for power supply from system.
• Supports Plug-n-Play and hot-swapping function.
• Each USB port supplies maximum +5V / 900mA power output to USB device.
• Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices.
• Compatible with Windows XP/Vista/7 (32-bit and 64-bit).
System Requirements:
AMD or Intel Pentium 1.5GHz or better based computer
• Windows
®
XP / Vista or 7 operating system
• 1 GB DDR Ram or above.
• Free PCI-Express slot with x1, x4, x8 or x16.
• CD/DVD-Rom drive
Installing the hardware device:
• Turn your computer off, remove the power connection and the cover from the computer case.
• Remove the metal cover plate on the rear of a PCI-Express card slot.
• Insert the card into the PCI-Express slot and x it on the brackets side.
• Connect the internal power on the 4-pin of the PCI-Expres USB3.0 card.
• Place back the cover of the computer case and turn on the computer.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic CMP-PCIE2USB3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic CMP-PCIE2USB3 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info