508618

Konig Electronic CMP-2DTO3DCONV Manual

2
Zoom out
Zoom in
Previous page
1/44
Next page
2
ENGLISH
2D to 3D video converter box
First installation:
1. Connect the converter box power cable to the converter box and plug in.
2. You will see a single continuous blue light on the front of the converter box.
3. Disconnect the HDMI cable from the video source device (HD Cable Box, HD Satellite Box, Blu-ray
or media player or game console and connect it to the output on the converter box (leave the other
end connected to the TV). You will see a second continuous blue light on the front of the converter
box.
4. Using a second HDMI cable, connect one of the HDMI inputs from the converter box to the original
video source device.
5. Switch on the TV.
6. Set the TV to display the relevant HDMI input (the same as you used before for the video source).
You should see a green screen on the TV, indicating the converter box is connected to your TV.
7. If necessary, switch on the video source device.
8. You will see the image from the video source device on the TV.
9. High Speed HDMI® with ethernet compliant 3D sources will be recognized and the converter box
will automatically switch to 3D mode. You can switch through available modes by pressing the
mode button on the front panel or the 2D/3D button on the remote control.
10. Otherwise, to change the 3D settings press the mode button on the front of the converter box or the
2D/3D button on the remote control. The 3D converter box supports FP, SBS and TAB formats
which can be accessed through the Mode Menu.
11. Put on your coloured 3D glasses to experience the 3D effect.
TV, monitor or projector
Set-top box
HDMI OUT
DVD or Blu-ray player
HDMI OUT
2D/3D converter box
HDMI IN
TV
HDMI
IN
HDMI OUT
2 …


Need help? Post your question in this forum.

Forumrules
1

Forum

konig-electronic-cmp-2dto3dconv

Reset search

  • I have no video on ,tv screen and I have the konig device connected per the manual instructions. please advise ASAP! Submitted on 10-12-2019 at 00:50

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic CMP-2DTO3DCONV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic CMP-2DTO3DCONV in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info