Message Cause Solution
CARD FULL
There is insufficient card
memory capacity to store an
image.
Delete the stored image(s) in the
memory card or insert a new
memory card.
MEMORY FULL
There is insufficient internal
memory capacity to store an
image.
Delete the stored image(s) in the
flash memory.
CARD LOCKED
(CARD ICON
blinking)
The SD card is under
protection.
Set the card protection switch at
non-protection position.
LOCK
The Image can't be deleted
under protection.
Unlock the protected image
(please see page19).
NO IMAGE
There is no image stored in
the memory card or built-in
flash memory.
FILE ERROR
Delete this image and take the
picture again.
MEMORY ERROR
Format the flash memory (see
page18).
CARD ERROR
Insert a new memory card.
LOW LIGHT!
The environment is too dark
with "Flash Off" mode.
Set the flash mode at Auto Flash
or Fill-in Flash.
HAND SHAKE ICON
( )
The environment is too dark
with "Flash Off" mode.
Set the flash mode at Auto Flash
or Fill-in Flash.
1. Connect the camera to the PC with USB cable under any
working mode. Please make sure the USB cable is well
2. Start Ulead Photo Explorer 7.0 SE Platinum .
3. Click File \ Download From Memory Card to get the stored
image(s).