288357
13
Zoom out
Zoom in
Previous page
1/37
Next page
25
24
Setting Up Functions Before Taking Pictures
Safety Notes
Setting Up Exposure (Preset : 0)
Please set the Mode Dial at Shooting Mode and press Menu
Button to enter "Still Image" menu table.
1. Select "Exposure"
2. Select the exposure from +2.0 to -2.0 (0.5 per step).
3. Press Right Direction Button to confirm the setting.
Note
The higher the value is, the brighter the image will be.
Under Playback Mode
Please set the Mode Dial at Playback Mode before setting up
the below functions. The TFT LCD Monitor will show the latest
captured image. Use Up and Down Direction Buttons
to select other captured images or movie clips.
( )
( )
( )
( )
( ) ( )
+
-
Setting Up White Balance (Preset : Auto White Balance)
Please set the Mode Dial at Shooting Mode and press Menu
Button to enter "Still Image" menu table.
1. Select "White Balance"
2. Five modes can be selected as follows:
Auto White Balance: The camera will adjust the white
balance by itself. It is suggested that the user to stay
with this mode unless the light environment is very
different from normal.
Daylight: For strong light environment.
Sunset: For sunset light environment.
Fluorescent: For fluorescent light environment.
Tungsten: For tungsten light environment.
3. Press Right Direction Button to confirm the setting.
( )
( )
( )
( )
( )
( )
( )
AUTO
Safety Notes
Formatting An SD Card
Please format the new card for the first time in advance before
using it.
Please set the Mode Dial at Playback Mode and press Menu
Button to enter "Play" menu table.
1. Select "Delete".
2. Select "Format".
3. Select "No" to cancel the order or select "Yes" to format the
memory card.
4. Press Right Direction Button to confirm the setting.
Formatting The Built-in Flash Memory
Make sure no memory card is inside.
1. Select "Delete".
2. Select 'Format".
3. Select "No" to cancel the order or select "Yes" to format the
built-in flash memory.
4. Press Right Direction Button ( ) to confirm the setting.
Setting Up Slide Show (Preset : 1 second)
Please set the Mode Dial at Playback Mode and press Menu
Button to enter "Play" menu table.
1. Select "Slide Show".
2. Select the time for slide show from 1 second to 9 seconds
(2 seconds per step).
3. Press Right Direction Button to start the slide show.
You can press Menu Button to cancel the slide show.
Setting An Image At Protect Status Or Cancel The Protection
Of An Protected Image
Please set the Mode Dial at Playback Mode and press Menu
Button to enter "Play" menu table.
( )
( )
( )
( )
( )
Setting Up Functions Before Taking Pictures
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konica revio kd 25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konica revio kd 25 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Konica revio kd 25

Konica revio kd 25 User Manual - German - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info