0.5Ev more than the scale limit
1Ev or more than the scale limit
Manual shift (p. 44)
A-6 Recording
E
A-7Recording
RECORDING
To manually adjust the metered
exposure +/– 3Evs in 1/2Ev or +/–
2Evs in 1/3 Ev increments.
Viewfinder
Monitor
EXPOSURE
Combination in P/A/S/M modes (p. 40, 42-44)
Faster shutter speed can be used with high-speed sync with the Program
flash 5600HS(D) or 3600HS(D).
The set and metered exposures are equal.
0.5Ev more than the metered exposure.
In the manual exposure mode, press
and hold the AEL button and turn
either control dial to shift the aperture
and shutter-speed combination
without affecting the total exposure.
Exposure warning (p. 40, 42-44)
If either or both the aperture and shutter-
speed displays blink, the exposure is beyond
the exposure control range of the camera and lens. Adjust the
exposure until the blinking stops.
Program shift (PA/PS) (p. 41)
In P mode, the control dials shift the
aperture/shutter speed combination.
The front dial shifts the shutter speed
and the rear dial the aperture.
Exposure compensation
Compensation display
To manually adjust the output of the built-in or an
attached accessory flash up to +/- 2 Ev in 1/2 Ev
increments.
Flash compensation
Flash compensation value
(Example: +1.5Ev)
Metering in M mode (p. 44)
The Ev scale displays the Ev difference between the set exposure
and the metered exposure. The increments on the scale depend
on the exposure-compensation dial position. The examples below
are based on a 0.5 Ev increment.
Front control
dial: Ps
Rear control
dial: PA
(A) Aperture priority
Exposure compensation value
(Example: –0.7Ev)
1/2Ev increment
1/3Ev increment
(Continued on the next page.)
Aperture
Automatic
by control dials
Automatic
by rear control dial
Flash sync.
1/125s or
slower. 1/160s
or slower when
Anti-Shake is
off.
Shutter
Automatic
Automatic
by control dials
by front control dial
Mode
P
A
S
M
Full-auto program
(1~3) Memory registers
(S) Shutter priority
(M) Manual exposure
(P) Program
Exposure and flash compensation (p. 48)