717859

Konica Minolta CF5001 Manual

403
Zoom out
Zoom in
Previous page
1/432
Next page
[13] Memory Switch Setting (continued)
14-39
Procedure
1 Touch [13] Memory switch setting to display the Memory Switch Setting
Screen.
2 To select the desired item, touch the arrow keys (c) and (d) at the right of the
Memory Switch Setting Screen to highlight it.
To scroll, touch the arrow keys at the lower left corner of the screen.
3 To change the setting of the highlighted item, touch Change Setting Contents
repeatedly till the desired setting is displayed.
Repeat above steps 2 to 3 to make several changes in succession.
4 Touch PREVIOUS SCREEN on the Memory Switch Setting Screen to restore the
Key Operator Mode Screen.
The following functions can be provided by the Memory Switch settings.
[1] Auto reset timer
Set the reset interval starting from the completion of a copying job until the machine
returns to the initial condition.
[2] AUTO RESET key function
Set the condition of the following modes when [AUTO RESET] is pressed: Copy
mode, Copy density, Magnification, Tray selection.
[3] RADF-Original effect
Set the machine condition when original is set on RADF in non-RADF mode with
RADF unit closed.
[4] Job memory auto recall (30)
Job memory number 30 is automatically recalled when power is turned on or when
Auto-reset is restored.
This job recall function works only when Job number 30 is registered.
[5] Finisher mode by Full-auto
Set the Output Mode to be recalled when [AUTO RESET] is pressed.
[6] Initial by Key counter insert
Set the machine to return to the initial state when Key counter is inserted.
[7] Erasure outside area of original
Set the machine to delete the outside area of originals.
[8] RADF frame erasure selection
Set Frame erasure to function anytime in RADF mode.
[9] Automatic tray switching
When paper is depleted during a copying job, the copier continues copying by
switching to another tray that contains the same size paper.
[10] Platen APS
The copier automatically selects the same size copy paper as the original placed on
the platen glass. (In reduction or enlargement mode, an appropriate paper size is
selected according to the ratio selected.)
[11] RADF APS
The copier automatically selects the same size copy paper as the original placed on
the RADF. (In reduction/enlargement mode, an appropriate paper size is selected
according to the ratio.)
… 403 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konica Minolta CF5001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konica Minolta CF5001 in the language / languages: English as an attachment in your email.

The manual is 9,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Konica Minolta CF5001

Konica Minolta CF5001 Quick start guide - German - 428 pages

Konica Minolta CF5001 Quick start guide - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info