717575

Konica Minolta Bizhub C3850FS Manual

68
Zoom out
Zoom in
Previous page
1/76
Next page
5-22 bizhub C3850FS/C3850/C3350
Registering a destination
5
5.6
[Fax]
[E-mail]
Settings Description
[No.] Destination registration number. The smallest available number that is not
used is automatically assigned.
[Name] Enter the destination name (using up to 72 characters).
[Favorites] Select this option to register a frequently used destination. The registered des-
tination is displayed in [Favorites], enabling you to easily specify a destination.
[Index] Select a corresponding character so that the destination can be index
searched by name.
[Fax number] Enter a destination fax number.
• When you use this machine in a PBX environment, tap [Outside] ([E] ap-
pears). A registered outside line number is automatically inserted.
• When you use this machine in a PBX environment, tap [Pause] following the
outside line number ([P] appears) to ensure dialing is successful.
• If you want to send out a push signal over the dial line, tap [Tone] ([T] ap-
pears).
• Enter [-] to separate a dial number. It does not affect the dialing of the num-
ber.
[Line Settings] If necessary, specify how to send a fax to a destination you want to register.
You may change the settings you made here before sending a fax.
• [ECM]: ECM is an error correction mode defined by ITU-T (International Tel-
ecommunication Union - Telecommunication Standardization Sector). Fax
machines equipped with the ECM feature communicate with each other,
confirming that the sent data is free of errors. This prevents image blurring
caused by telephone line noise.
If you send a fax using a telephone line in an environment containing static,
it may take a longer time to communicate. In this case, the communication
time can be reduced by setting ECM to OFF for transmission. However, im-
age or communication errors may occur depending on the specified com-
munication time value, so change the value to suit conditions.
• [V.34]: V34 is a communication mode used for super G3 fax communica-
tion. However, when the remote machine or this machine is connected to
a telephone line via PBX, you may not establish a communication in super
G3 mode depending on telephone line conditions. In this case, it is recom-
mended that you set the V34 mode to off to send data.
• [Check Dest. & Send]: Set this option to ON when the Check Dest. & Send
function is used. The fax number specified for fax is checked against the
destination fax number (CSI), and the fax is sent only when they match.
Settings Description
[No.] Destination registration number. The smallest available number that is not
used is automatically assigned.
[Name] Enter the destination name (using up to 72 characters).
[Favorites] Select this option to register a frequently used destination. The registered des-
tination is displayed in [Favorites], enabling you to easily specify a destination.
[Index] Select a corresponding character so that the destination can be index
searched by name.
[E-mail] Enter the E-mail address as a destination (using ASCII characters of up to 320
bytes).
… 68 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konica Minolta Bizhub C3850FS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konica Minolta Bizhub C3850FS in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Konica Minolta Bizhub C3850FS

Konica Minolta Bizhub C3850FS Quick start guide - German - 78 pages

Konica Minolta Bizhub C3850FS Quick start guide - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info