717835

Konica Minolta Bizhub C360i Manual

77
Zoom out
Zoom in
Previous page
1/106
Next page
bizhub C360i/C300i/C250i 8-3
8.1 How to register a destination
8
8 Registering a destination
8.1 How to register a destination
Registering a fax address
1
Tap [Utility] - [Utility] - [Store Address] - [Address Book] - [New Registration].
2
In [Select Destination], select [Fax].
3
Enter destination information.
4
Tap [OK].
Setting Description
[No.] Destination registration number. Select [Use opening number] to automati-
cally assign the smallest available number. When you want to specify a num-
ber, select [Direct Input] and then enter a number.
[Name] Enter the destination name (using up to 24 characters).
[Index] Select an index to search for a destination using the registered name.
For a frequently used destination, select the [Main] check box. The destina-
tions are displayed on the destination selection screen, enabling the user to
easily select a destination.
[Destination] Enter the destination fax number (using up to 38 digits, including symbols #,
*, -, and characters T, P, and E).
• [T] or [*]: Enter the fax number when issuing a push signal in dial-up line
mode (while [Dialing Method] is set to [10pps] or [20pps]).
• [P]: Enter this when you want to insert a wait time between dials.
• [-]: Enter this to separate a dial number. It does not affect the dialing of
the number.
• [E-]: Enter the registered outside line number in PBX environment. Enter
this when [PBX Connection Setting] is set to ON.
[Confirm Fax Num-
ber]
Enter the fax number again.
This option is displayed when [Function ON/OFF Setting] - [Confirm Address
(Register)] is set to ON.
[Line Setting] If multiple lines are used, select the line used to send a fax.
In general use, use [Line 1]. If [Normal] is selected, either line, whichever is
not busy, is used for transmission.
[Communication
Setting]
If necessary, specify how to send a fax to a destination you want to register.
You may change the settings you made here before sending a fax.
• [V34 Off]: V.34 is a communication mode used for super G3 fax commu-
nication. When the remote machine or this machine is connected to a
telephone line via PBX, however, you may not establish a communica-
tion in the super G3 mode depending on telephone line conditions. In
this case, it is recommended that you turn the V.34 mode off to send da-
ta.
• [ECM Off]: ECM is an error correction mode defined by ITU-T (Interna-
tional Telecommunication Union - Telecommunication Standardization
Sector). Fax machines equipped with the ECM feature communicate
with each other, confirming that the sent data is free of errors. This pre-
vents image blurring caused by telephone line noise.
The communication time can be reduced by setting ECM to OFF for
transmission. However, an image error or communication error may oc-
cur depending on the specified communication time value, so change
the value to suit conditions.
• [International Communication]: Used to send a fax to areas where com-
munication conditions are poor. Faxes are sent at a lower speed.
• [Check Destination]: The fax number specified for fax is checked against
the destination fax number (CSI) and the fax is sent only when they
match.
… 77 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konica Minolta Bizhub C360i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konica Minolta Bizhub C360i in the language / languages: English as an attachment in your email.

The manual is 21,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Konica Minolta Bizhub C360i

Konica Minolta Bizhub C360i User Manual - German - 110 pages

Konica Minolta Bizhub C360i User Manual - Dutch - 110 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info