717842
199
Zoom out
Zoom in
Previous page
1/216
Next page
bizhub C658/C558/
C458/C368/C308/C258
QUICK GUIDE
bizhub C658/C558/C458/C368/C308/C258 Contents-1
Table of contents
1Introduction
1.1 Environmental information............................................................................................................. 1-4
Environmental initiatives .................................................................................................................... 1-4
ENERGY STAR®................................................................................................................................ 1-4
What is an ENERGY STAR® product? .............................................................................................. 1-4
Environmental benefits of power management ................................................................................. 1-4
Recycled paper.................................................................................................................................. 1-4
Duplex printing................................................................................................................................... 1-4
1.2 Certification for USA, Canada, Mexico, Brazil and Europe area ................................................ 1-5
For U.S.A............................................................................................................................................ 1-5
For Canada ........................................................................................................................................ 1-5
For Mexico ......................................................................................................................................... 1-5
For Brazil............................................................................................................................................ 1-5
For Europe ......................................................................................................................................... 1-5
1.3 Safety information........................................................................................................................... 1-6
Warning and precaution symbols ...................................................................................................... 1-6
These are some of major exemplary graphical symbols. .................................................................. 1-6
Power source connection .................................................................................................................. 1-6
Installation.......................................................................................................................................... 1-8
Using the product .............................................................................................................................. 1-9
Consumables ................................................................................................................................... 1-10
1.4 Regulation notices ........................................................................................................................ 1-11
CE Marking (Declaration of Conformity) for users of the European Union (EU)............................... 1-11
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (for U.S.A. users)............ 1-11
INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 5) (for Canada users) .... 1-12
For users in countries not subject to class B regulations................................................................ 1-12
GS Certification................................................................................................................................ 1-12
Laser safety...................................................................................................................................... 1-12
Internal laser radiation...................................................................................................................... 1-12
CDRH regulations ............................................................................................................................ 1-13
For European users.......................................................................................................................... 1-13
Laser safety label ............................................................................................................................. 1-14
Ozone release .................................................................................................................................. 1-14
Acoustic noise (for European users only)......................................................................................... 1-14
For EU member states only ............................................................................................................. 1-15
Telephone cable (for users in countries subject to class B regulations).......................................... 1-15
USB Host ......................................................................................................................................... 1-15
Graphic symbols used on this machine........................................................................................... 1-16
1.5 Caution notations and labels ....................................................................................................... 1-17
bizhub C658/C558/C458 ................................................................................................................. 1-17
bizhub C368/C308/C258 ................................................................................................................. 1-18
1.6 Special notice to user................................................................................................................... 1-19
For Europe ....................................................................................................................................... 1-19
1.7 Space requirements...................................................................................................................... 1-20
bizhub C658/C558/C458 ................................................................................................................. 1-20
bizhub C368/C308/C258 ................................................................................................................. 1-21
1.8 Operation precautions.................................................................................................................. 1-22
Power source................................................................................................................................... 1-22
Operating environment .................................................................................................................... 1-22
Storage of copies............................................................................................................................. 1-22
Data stored in this machine ............................................................................................................. 1-22
1.9 Legal restrictions on reproduction.............................................................................................. 1-23
1.10 Trademark acknowledgements ................................................................................................... 1-24
Copyright ......................................................................................................................................... 1-25
Note ................................................................................................................................................. 1-25
Contents-2 bizhub C658/C558/C458/C368/C308/C258
1.11 SOFTWARE LICENSE AGREEMENT ........................................................................................... 1-26
1.12 i-Option LK-105 v4 (searchable PDFs) End User License Agreement ..................................... 1-28
2 About This Machine
2.1 Intended use of office MFP devices.............................................................................................. 2-3
Intended use ...................................................................................................................................... 2-3
Impermissible operating conditions................................................................................................... 2-3
Exclusion of liability............................................................................................................................ 2-3
2.2 Introduction to user's guide........................................................................................................... 2-4
2.2.1 [Quick Guide] (this manual) .................................................................................................................2-4
2.2.2 User's Guide CD/DVD.........................................................................................................................2-4
Layout of top page............................................................................................................................. 2-5
Operating environment ...................................................................................................................... 2-5
2.2.3 Target groups......................................................................................................................................2-6
2.2.4 Symbols and notations used in this manual .......................................................................................2-6
Procedural instruction........................................................................................................................ 2-6
Symbols and notations ...................................................................................................................... 2-7
Screens .............................................................................................................................................. 2-7
Names and notations of applications ................................................................................................ 2-7
2.3 About this machine ......................................................................................................................... 2-8
2.3.1 Optional components (bizhub C658/C558/C458)...............................................................................2-8
List of optional components .............................................................................................................. 2-8
List of other optional components................................................................................................... 2-10
2.3.2 Optional components (bizhub C368/C308/C258).............................................................................2-12
List of optional components ............................................................................................................ 2-12
List of other optional components................................................................................................... 2-14
2.3.3 Name of parts (MFP) (bizhub C658/C558/C458) ..............................................................................2-16
Front................................................................................................................................................. 2-16
Side/rear........................................................................................................................................... 2-17
2.3.4 Name of parts (MFP) (bizhub C368/C308/C258) ..............................................................................2-18
Front................................................................................................................................................. 2-18
Side/rear........................................................................................................................................... 2-19
2.3.5 Name of parts (Optional units) ..........................................................................................................2-20
Finisher FS-537, Finisher FS-537 SD, Punch Kit PK-523,
Z Folding Unit ZU-609 (bizhub C658/C558/C458) .......................................................................... 2-20
Job Separator JS-602 (bizhub C658/C558/C458)........................................................................... 2-22
Post Inserter PI-507 (bizhub C658/C558/C458) .............................................................................. 2-23
Finisher FS-533, Punch Kit PK-519 (bizhub C558/C458/C368/C308/C258)................................... 2-24
Job Separator JS-506 (bizhub C558/C458/C368/C308/C258) ....................................................... 2-25
Finisher FS-536, Finisher FS-536 SD, Finisher FS-534, Finisher FS-534 SD,
Punch Kit PK-520 ............................................................................................................................ 2-26
Large Capacity Unit LU-302/LU-207 (bizhub C658/C558/C458) .................................................... 2-28
2.4 Power supply................................................................................................................................. 2-29
2.4.1 Turning the power on and off............................................................................................................2-29
2.4.2 Operating the Power key ..................................................................................................................2-30
2.4.3 Power save function .........................................................................................................................2-31
Reducing power consumption......................................................................................................... 2-31
2.5 Control Panel................................................................................................................................. 2-32
2.5.1 Name of parts ...................................................................................................................................2-32
2.6 Touch Panel................................................................................................................................... 2-34
2.6.1 Main menu ........................................................................................................................................2-34
Layout of main menu ....................................................................................................................... 2-34
Customizing the main menu ............................................................................................................ 2-35
2.6.2 Slide menu ........................................................................................................................................2-35
Customizing the slide menu............................................................................................................. 2-36
bizhub C658/C558/C458/C368/C308/C258 Contents-3
2.6.3 Operating the Touch Panel ...............................................................................................................2-36
Tap ................................................................................................................................................... 2-36
Double-tap ....................................................................................................................................... 2-36
Flick.................................................................................................................................................. 2-36
Drag ................................................................................................................................................. 2-37
Pan................................................................................................................................................... 2-37
Long-tap .......................................................................................................................................... 2-37
Drag & Drop ..................................................................................................................................... 2-37
Pinch in/Pinch out............................................................................................................................ 2-38
Rotation............................................................................................................................................ 2-38
Precautions on using the Touch Panel ............................................................................................ 2-38
2.6.4 How to display the Keypad...............................................................................................................2-39
How to move the Keypad ................................................................................................................ 2-39
How to close the Keypad................................................................................................................. 2-39
To display the Keypad all the time................................................................................................... 2-40
2.6.5 Entering characters...........................................................................................................................2-40
When typing in "Group1":................................................................................................................ 2-40
2.7 Jobs................................................................................................................................................ 2-41
2.7.1 Job screen ........................................................................................................................................2-41
2.7.2 Multi-job function..............................................................................................................................2-41
2.8 Loading paper ............................................................................................................................... 2-42
2.8.1 Loading paper in Tray 1 to Tray 4.....................................................................................................2-42
Applicable paper types .................................................................................................................... 2-42
Applicable paper sizes..................................................................................................................... 2-42
How to load paper ........................................................................................................................... 2-42
2.8.2 LCT (built-in)......................................................................................................................................2-44
Applicable paper types .................................................................................................................... 2-44
Applicable paper sizes..................................................................................................................... 2-44
How to load paper ........................................................................................................................... 2-44
2.8.3 Loading paper into the Large Capacity Unit.....................................................................................2-45
Applicable paper types .................................................................................................................... 2-45
Applicable paper sizes..................................................................................................................... 2-45
How to load paper ........................................................................................................................... 2-45
2.8.4 Bypass Tray ......................................................................................................................................2-46
Applicable paper types .................................................................................................................... 2-46
Applicable paper sizes..................................................................................................................... 2-46
Paper not available .......................................................................................................................... 2-47
How to load paper ........................................................................................................................... 2-47
Loading postcards ........................................................................................................................... 2-48
Loading transparencies ................................................................................................................... 2-49
Loading envelopes........................................................................................................................... 2-50
Loading label sheets........................................................................................................................ 2-52
Loading index papers ...................................................................................................................... 2-53
3 Basic Settings and Operations
3.1 Print function ................................................................................................................................... 3-3
3.1.1 Required settings and basic operations (for Windows OS) ................................................................3-3
Preparation flow................................................................................................................................. 3-3
Operation flow.................................................................................................................................... 3-3
Checking the cable connection ......................................................................................................... 3-4
Checking network settings of this machine....................................................................................... 3-4
Installing the printer driver ................................................................................................................. 3-5
Printing data....................................................................................................................................... 3-5
Types of printer drivers ...................................................................................................................... 3-6
3.1.2 Required settings and basic operations (for Mac OS) ........................................................................3-6
Preparation flow................................................................................................................................. 3-6
Operation flow.................................................................................................................................... 3-7
Checking the cable connection ......................................................................................................... 3-7
Checking network settings of this machine....................................................................................... 3-7
Contents-4 bizhub C658/C558/C458/C368/C308/C258
Installing the printer driver ............................................................................................................... 3-10
Adding and configuring a printer driver ........................................................................................... 3-10
Printing data..................................................................................................................................... 3-11
3.2 Scan-to-Send function ................................................................................................................. 3-12
3.2.1 Various transmission methods..........................................................................................................3-12
Sending data to your computer (SMB Send)................................................................................... 3-12
Transmitting data as E-mail attachment (E-mail TX)........................................................................ 3-12
Saving data to the USB memory device (External memory)............................................................ 3-12
Various methods for transmitting and saving data .......................................................................... 3-13
3.2.2 Sending data to your Windows computer (SMB Send) ....................................................................3-14
Preparation flow............................................................................................................................... 3-14
Operation flow.................................................................................................................................. 3-15
Checking the cable connection ....................................................................................................... 3-15
Checking network settings of this machine..................................................................................... 3-15
Checklist .......................................................................................................................................... 3-16
Checking computer information ...................................................................................................... 3-16
Configuring your computer.............................................................................................................. 3-17
Registering destinations .................................................................................................................. 3-17
Sending the original ......................................................................................................................... 3-20
3.2.3 Sending data to your Mac computer (SMB Send)............................................................................3-22
Preparation flow............................................................................................................................... 3-22
Operation flow.................................................................................................................................. 3-23
Checking the cable connection ....................................................................................................... 3-23
Checking network settings of this machine..................................................................................... 3-23
Configuring this machine ................................................................................................................. 3-24
Checklist .......................................................................................................................................... 3-25
Checking computer information ...................................................................................................... 3-25
Configuring your computer.............................................................................................................. 3-26
Registering destinations .................................................................................................................. 3-26
Sending the original ......................................................................................................................... 3-29
3.2.4 Transmit the scanned data via E-mail (E-mail TX) ............................................................................3-31
Preparation flow............................................................................................................................... 3-31
Operation flow.................................................................................................................................. 3-31
Checking the cable connection ....................................................................................................... 3-32
Checking network settings of this machine..................................................................................... 3-32
Configuring the E-mail transmission environment ........................................................................... 3-33
Configuring administrator information ............................................................................................. 3-34
Sending the original ......................................................................................................................... 3-35
3.3 Fax function ................................................................................................................................... 3-38
3.3.1 Required settings and basic operations ...........................................................................................3-38
Preparation flow............................................................................................................................... 3-38
Operation flow.................................................................................................................................. 3-38
Checking the cable connection ....................................................................................................... 3-39
Registering transmission information .............................................................................................. 3-39
Selecting the dialing method ........................................................................................................... 3-40
Sending the original ......................................................................................................................... 3-41
3.3.2 Sending a fax directly from a PC (PC-FAX TX) .................................................................................3-43
Preparation flow............................................................................................................................... 3-44
Operation flow.................................................................................................................................. 3-44
Checking the cable connection ....................................................................................................... 3-44
Checking network settings of this machine..................................................................................... 3-45
Installing the fax driver ..................................................................................................................... 3-46
Sending data.................................................................................................................................... 3-47
3.4 Copy function ................................................................................................................................ 3-48
Basic operations .............................................................................................................................. 3-48
User authentication.......................................................................................................................... 3-50
bizhub C658/C558/C458/C368/C308/C258 Contents-5
3.5 Registering a destination ............................................................................................................. 3-51
3.5.1 Registering an address book ............................................................................................................3-51
Using the Control Panel to register an address book - Registration from Utility............................. 3-51
Using the Control Panel to register an address book - Registration from Address book ............... 3-53
Using the Control Panel to register an address book - Registration in scan/fax mode .................. 3-55
Using a computer to register a one-touch destination .................................................................... 3-58
3.5.2 Information required to register a destination...................................................................................3-59
3.5.3 Registering a group...........................................................................................................................3-60
Registering a new group.................................................................................................................. 3-60
3.5.4 Retrieving a registered destination ...................................................................................................3-62
Retrieving a destination ................................................................................................................... 3-62
Specifying a destination................................................................................................................... 3-64
3.6 Using a USB memory device ....................................................................................................... 3-65
3.6.1 Printing data in a USB memory device.............................................................................................3-65
Printing data..................................................................................................................................... 3-65
3.6.2 Saving the scanned data in the USB memory device (External memory) ........................................3-67
Specifying functions to be permitted for external memory.............................................................. 3-67
Saving data in the USB memory device .......................................................................................... 3-69
3.7 Using the guidance function........................................................................................................ 3-72
3.7.1 Guidance screen...............................................................................................................................3-72
Getting help on the currently displayed screen: .............................................................................. 3-72
Getting help on the desired function or procedure:......................................................................... 3-74
Help Menu list .................................................................................................................................. 3-76
3.8 Using the [Quick Security] function............................................................................................. 3-77
3.8.1 [Quick Security].................................................................................................................................3-77
Required settings............................................................................................................................. 3-77
4 Advanced Functions
4.1 Using advanced functions.............................................................................................................. 4-3
4.1.1 What are advanced functions? ...........................................................................................................4-3
4.1.2 Association with application ...............................................................................................................4-4
4.1.3 Registering the i-Option license..........................................................................................................4-4
Preparation flow................................................................................................................................. 4-4
Enabling the i-Option function ........................................................................................................... 4-5
Registering the i-Option license......................................................................................................... 4-6
Enabling the i-Option function using the license (Administrator)....................................................... 4-9
Configuring each function................................................................................................................ 4-10
4.2 Using the Web browser function................................................................................................. 4-11
4.2.1 Required settings and procedures....................................................................................................4-11
Preparation flow............................................................................................................................... 4-11
Operation flow.................................................................................................................................. 4-12
Enabling the Web browser function................................................................................................. 4-12
Registering the license..................................................................................................................... 4-13
Enabling the Web browser using the license................................................................................... 4-15
Starting the Web browser ................................................................................................................ 4-19
Displaying Web pages ..................................................................................................................... 4-19
Printing the currently displayed page or the linked file.................................................................... 4-20
5 Troubleshooting
5.1 Main messages and remedies ....................................................................................................... 5-3
5.1.1 When a message appears to replace consumables or carry out cleaning.........................................5-3
5.1.2 When a paper jam message persists..................................................................................................5-4
5.1.3 When an error message appears........................................................................................................5-4
5.1.4 When [Stabilizing image.] appears......................................................................................................5-5
5.2 When printing quality has deteriorated......................................................................................... 5-6
5.2.1 Cleaning the Print Head Glass............................................................................................................5-6
5.3 When the machine cannot be powered on................................................................................... 5-8
5.4 When the Touch Panel is not visible ............................................................................................. 5-9
Contents-6 bizhub C658/C558/C458/C368/C308/C258
5.5 When a message appears to replace consumables or carry out cleaning ............................. 5-10
When staples in the finisher have run out........................................................................................ 5-10
When the punch scrap box is full .................................................................................................... 5-11
When toner is running out in the Toner Cartridge............................................................................ 5-11
When it is time to replace a Toner Cartridge ................................................................................... 5-12
When it is time to replace a Drum Unit ............................................................................................ 5-12
When it is time to replace a Developing Unit................................................................................... 5-13
When a Waste Toner Box is full ....................................................................................................... 5-13
5.5.1 Replacing a Toner Cartridge.............................................................................................................5-14
bizhub C658/C558/C458 ................................................................................................................. 5-14
bizhub C368/C308/C258 ................................................................................................................. 5-15
5.5.2 Replacing a Waste Toner Box ..........................................................................................................5-16
bizhub C658/C558/C458 ................................................................................................................. 5-16
bizhub C368/C308/C258 ................................................................................................................. 5-17
5.5.3 Replacing a Drum Unit......................................................................................................................5-18
bizhub C658/C558/C458 ................................................................................................................. 5-18
bizhub C368/C308/C258 ................................................................................................................. 5-19
5.5.4 Replacing a Staple Cartridge ............................................................................................................5-20
Finisher FS-537/Finisher FS-537 SD ............................................................................................... 5-20
Finisher FS-536/Finisher FS-536 SD/Finisher FS-534/Finisher FS-534 SD .................................... 5-21
Finisher FS-533................................................................................................................................ 5-22
5.5.5 Replacing a Saddle Staple Cartridge................................................................................................5-23
Finisher FS-537 SD.......................................................................................................................... 5-23
Finisher FS-536 SD/Finisher FS-534 SD ......................................................................................... 5-24
6Index
1
Introduction
bizhub C658/C558/C458/C368/C308/C258 1-3
1
1Introduction
This [Quick Guide] uses illustrations to describe operating procedures for the most commonly used functions
in an easy-to-understand way.
Start by using this manual to become proficient with the useful functions that this machine offers.
For details on the various functions, refer to the User’s Guides on the User’s Guide CD/DVD included with
this machine.
In order to operate the machine safely and properly, be sure to read the safety information on page 1-6 of
this manual before use.
In addition, this manual contains the following information. Be sure to read the manual before using the ma-
chine.
- Items that must be observed to use the machine safely
- Information regarding product safety
- Precautions when using the machine
- Descriptions on trademarks and copyrights
The illustrations and screens used in this manual may appear slightly different from views of the actual equip-
ment and screens.
Tips
- Please keep this manual as well as the attached CD/DVD in a safe place where you can access them
easily.
1-4 bizhub C658/C558/C458/C368/C308/C258
Environmental information
1
1.1
1.1 Environmental information
Environmental initiatives
The company continuously strives to reduce the negative environmental impacts of all stages of its business
operations.
As part of such activities, the company is implementing resource-saving steps by reducing the number of
pages in the User's Guide.
For the information necessary to operate the machine, please refer to the bundled User's Guide CD/DVD
(HTML format). This guide has an excellent search function.
Functions such as keyword search and filtering by purpose are very useful to help users find what they need
to know.
ENERGY STAR®
As an ENERGY STAR
®
Partner, this machine meets the ENERGY STAR
®
Guidelines for energy efficiency.
What is an ENERGY STAR® product?
An ENERGY STAR
®
product has a special feature that allows it to automatically switch to a "low-power
mode" after a period of inactivity. An ENERGY STAR
®
product uses energy more efficiently, saves you money
on utility bills and helps protect the environment.
Environmental benefits of power management
Electricity consumption of a device depends on both its properties and the way of using the device.
Suitable power management setting offers you resource saving usage way. By setting the time to go into
power saving modes (e.g. sleep mode) shorter (or optimal), electricity consumption can be reduced.
Recycled paper
This product can print on recycled paper and environmental stewardship initiatives certified paper which
complies with European standard EN 12281 as well as virgin paper. In addition it can print on lighter paper,
64g/m
2
for example. Using such light paper contributes to resources-saving.
Duplex printing
With a product which has a duplex unit, you can print on both sides of paper automatically.
Using this function leads to reducing consumption of natural resources and your cost.
Attached printer driver provides this duplex printing function as initial setting in your computer (The setting
can be changed after installation manually).
bizhub C658/C558/C458/C368/C308/C258 1-5
1.2 Certification for USA, Canada, Mexico, Brazil and Europe area
1
1.2 Certification for USA, Canada, Mexico, Brazil and Europe area
For U.S.A
This product is certified by the following model name in U.S.A.
KONICA MINOLTA branded model bizhub C658, bizhub C558, bizhub C458 and C302301 (bizhub C368,
bizhub C308 and C258).
For Canada
This product is certified by the following model name in Canada.
KONICA MINOLTA branded model bizhub C658, bizhub C558, bizhub C458 and C302301 (bizhub C368,
bizhub C308 and C258).
For Mexico
This product is certified by the following model name in Mexico.
KONICA MINOLTA branded model bizhub C658, bizhub C558, bizhub C458 and C302301 (bizhub C368,
bizhub C308 and C258).
For Brazil
This product is certified by the following model name in Brazil.
KONICA MINOLTA branded model bizhub C658, bizhub C558, bizhub C458 and C302301 (bizhub C368,
bizhub C308 and C258).
For Europe
This product is certified by the following model name in Europe.
KONICA MINOLTA branded model bizhub C658, bizhub C558, bizhub C458 and C302301 (bizhub C368,
bizhub C308 and C258).
1-6 bizhub C658/C558/C458/C368/C308/C258
Safety information
1
1.3
1.3 Safety information
This section contains detailed instructions on the operation and maintenance of this machine. To achieve op-
timum utility of this device, all operators should carefully read and follow the instructions in this manual.
Please read the following section before connecting the machine to the supply. It contains important infor-
mation related to user safety and preventing equipment problems.
Make sure that you observe all of the precautions that appear in different sections of this manual.
Reference
- Some parts of the contents of this section may not correspond with the purchased product.
Warning and precaution symbols
Be sure to observe the safety precautions.
This manual contains the instructions that should be strictly observed at all times to prevent injury to yourself
and other persons as well as damage to property.
Injuries and damage that might be caused by using the product improperly are classified according to the
following symbols.
These are some of major exemplary graphical symbols.
Power source connection
Pictorial indication Description
WARNING Improper handling can cause serious injury or death.
CAUTION Improper handling can cause minor injury or damage to houses and
property.
Graphic
symbols
Descriptions Graphic
symbols
Descriptions Graphic
symbols
Descriptions
General prohibition Do not disassemble Do not touch
General instruction Ground/Earth Unplug from outlet
General precaution High temperature Electrical shock
hazard
WARNING
Do not use any power cord other than the one supplied in the package
or attached on the products. If a power cord is not supplied, use only the
power cord and plug that are specified in the user documentation. Fail-
ure to use this cord could result in a fire or electrical shock. If the power
cord supplied in the package cannot be used in the country where this
product was sold, use a power cord that meets the following conditions
or contact your Technical Representative.
The power cord has voltage and current rating appropriate for the rating
plate on this machine.
The power cord meets regulatory requirements for the area.
The power cord is provided with grounding pin/terminal.
Do not use the power cord to other products. Failure to do that could re-
sult in a fire or electrical shock.
bizhub C658/C558/C458/C368/C308/C258 1-7
1.3 Safety information
1
Do not scratch, abrade, place a heavy object on, heat, twist, bend, step
on, pull on, or damage the power cord. Use of a damaged power cord
(exposed core wire, broken wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the pow-
er switch, unplug the power cord from the power outlet, and then call
your authorized service representative.
Do not use the power source voltage other than being specified on the
machine. Failure to do that could result in a fire or electrical shock.
Do not use a multiple outlet adapter to connect any other appliances or
machines.
Use of a power outlet for more than the marked current value could result
in a fire or electrical shock.
Do not use an extension cord. Use of an extension cord could cause a
fire or electric shock. If the power cord furnished with the product is not
long enough to be plugged into a wall outlet, contact your Technical
Representative.
Do not unplug and plug in the power cord with a wet hand, as an electri-
cal shock could result.
Plug the power cord all the way into the power outlet. Failure to do this
could result in a fire or electrical shock.
Make sure to ground this product. (Connect the power cord to an elec-
trical outlet that is equipped with a grounding terminal.) Failure to do so
and an unlikely event of leakage could result in a fire or electrical shock.
CAUTION
The outlet must be near the equipment and easily accessible. Otherwise
you can not pull out the power plug when an emergency occurs.
Do not place any objects around the power plug, as the power plug may
be difficult to pull out when an emergency occurs.
Do not tug the power cord when unplugging. Pulling on the power cord
could damage the cord, resulting in a fire or electrical shock.
Remove the power plug from the outlet more than one time a year and
clean the area between the plug terminals. Dust that accumulates be-
tween the plug terminals may cause a fire.
WARNING
1-8 bizhub C658/C558/C458/C368/C308/C258
Safety information
1
1.3
Installation
WARNING
Keep this bag away from babies and children. Do not use in cribs, beds,
carriages, or playpens. The thin film may cling to nose and mouth and
prevent breathing. This bag is not a toy.
Do not place a flower vase or other container that contains water, or met-
al clips or other small metallic objects on this product. Spilled water or
metallic objects dropped inside the product could result in a fire, electri-
cal shock, or breakdown.
Should a piece of metal, water, or any other similar foreign matter get in-
side the product, immediately turn OFF the power switch, unplug the
power cord from the power outlet, and then call your Technical Repre-
sentative or your authorized service representative.
Make sure that the power cord is placed on a site in which no person
would step on or trip over it. Stepping on or tripping over the power cord
could heat the power cord, resulting in a fire or electric shock.
CAUTION
<If instructed to use fixing legs>
When the product has been installed, fix the product using the fixing legs.
Not using the fixing legs could cause the product to move or topple over.
Do not place the product in a dusty place, or a site exposed to soot or
steam, near a kitchen table, bath, or a humidifier. A fire, electrical shock,
or breakdown could result.
Do not place this product on an unstable or tilted bench, or in a location
subject to a lot of vibration and shock. It could drop or fall, causing per-
sonal injury or mechanical breakdown.
Do not let any object plug the ventilation holes of this product. Heat could
accumulate inside the product, resulting in a fire or malfunction.
Whenever moving this product, be sure to disconnect the power cord
and other cables. Failure to do this could damage the cord or cable, re-
sulting in a fire, electrical shock, or breakdown.
When moving this product, always hold it at the locations specified in the
User’s Guide or other documents. If the unit is moved while held at loca-
tions other than those specified, it may fall, causing severe personal in-
jury.
bizhub C658/C558/C458/C368/C308/C258 1-9
1.3 Safety information
1
Using the product
WARNING
Do not modify this product, as a fire, electrical shock, or breakdown
could result. If the product employs a laser, the laser beam source could
cause blindness.
Do not attempt to remove the covers and panels which have been fixed
to the product. Some products have a high-voltage part or a laser beam
source inside that could cause an electrical shock or blindness.
Do not keep using this product, if this product becomes inordinately hot
or emits smoke, or unusual odor or noise. Immediately turn OFF the pow-
er switch, unplug the power cord from the power outlet, and then call
your Technical Representative or your authorized service representative.
If you keep on using it as is, a fire or electrical shock could result.
Do not keep using this product, if this product has been dropped or its
cover damaged. Immediately turn OFF the power switch, unplug the
power cord from the power outlet, and then call your Technical Repre-
sentative or your authorized service representative. If you keep on using
it as is, a fire or electrical shock could result.
Do not use flammable sprays, liquids, or gases inside or near this ma-
chine. Do not clean the inside of this machine using a flammable gas
duster. A fire or explosion could result.
<If an RFID module (limited only to 13.56 MHz) for use in inside-the-ma-
chine proximity communication or electromagnetic induction heating (IH)
technology (limited only to 20.05 kHz to 100 kHz) is being used>
This machine generates a weak magnetic field. If you experience any un-
usual symptoms with your implantable medical equipment (cardiac
pacemaker, etc.) while near the machine, move away from the machine
and see a doctor immediately.
Please call your Technical Representative or your authorized service rep-
resentative if you do not understand the purchased product corresponds
or not.
<If a non-contact IC card reader is being used>
If you use an implantable medical equipment (cardiac pacemaker, etc.),
do not bring the IC card reader close from the implant within 12 cm at all
times. The radio waves may affect implantable medical equipment (car-
diac pacemaker, etc.) operations.
CAUTION
Using this product in a poorly ventilated room for a long time or produc-
ing a large volume of copies or prints may cause the odor of exhaust air
from the machine. Ventilate the room well.
The inside of this product has areas subject to high temperature, which
may cause burns.
When checking the inside of the unit for malfunctions such as a paper
misfeed, do not touch the locations (around the fusing unit, etc.) which
are indicated by a "Caution HOT" caution label. A burn could result.
Unplug the product when you will not use the product for long periods of
time.
When using the machine, do not look at the light of the lamp for a pro-
longed time. Eyestrain could result.
1-10 bizhub C658/C558/C458/C368/C308/C258
Safety information
1
1.3
Consumables
Do not use stapled paper, conductive paper (such as silver paper or car-
bon paper) or treated heat-sensitive/inkjet paper, otherwise a fire may re-
sult.
CAUTION
WARNING
Do not throw toner or a container that contains toner (e.g., toner cartridge
and developing unit) into an open flame. The hot toner may scatter and
cause burns or other damage.
CAUTION
Do not leave toner-related parts (e.g., toner cartridge and developing
unit) within easy reach of children. Licking any of these parts or ingesting
toner could damage your health.
Do not store toner-related parts (e.g., toner cartridge and developing
unit) near devices susceptible to magnetism, such as precision equip-
ment and data storage devices, otherwise they may malfunction. They
could cause these products to malfunction.
Do not force open the toner-related parts (e.g., toner cartridge and de-
veloping unit). If toner tumbles from the toner bottle, take utmost care to
avoid inhaling it or even getting skin contact.
If toner lands on your skin or clothing, wash thoroughly with soap and
water.
If you inhale toner, move to a place with fresh air and gargle with a lot of
water repeatedly. Should you get symptoms such as coughing, seek
medical advice.
If you get toner into your eyes, immediately rinse them with running water
for over 15 minutes. Seek medical advice if irritation persists.
If you swallow toner, rinse out your mouth and drink a few glasses of wa-
ter. Seek medical advice if necessary.
Never touch the electrical contacts of the units (e.g., toner cartridge and
developing unit), as an electrostatic discharge may damage the product.
Before handling, see the user documentation for the safety information.
<If instructed to replace the fusing unit>
The fusing section is extremely hot. Before replacing the fusing unit, be
sure to open doors and covers of the machine. Then, leave the machine
to stand idle for a specified period of time and make sure that the fusing
section has cooled down to room temperature. Failure to follow these in-
structions could result in a burn.
bizhub C658/C558/C458/C368/C308/C258 1-11
1.4 Regulation notices
1
1.4 Regulation notices
CE Marking (Declaration of Conformity) for users of the European Union (EU)
Hereby, Konica Minolta declares that the radio equipment types bizhub C658/C558/C458/C368/C308/C258
are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
"https://www.konicaminolta.eu/en/business-solutions/support/download-center.html".
Choose your product and open the section "Safety Documents".
Maximum radio-frequency power transmitted in the frequency band (EIRP):
Note: 5 GHz may not be available
This radio equipment is restricted to indoor use only. Outdoor use is prohibited.
This restriction applies to all the countries listed in the table below.
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (for
U.S.A. users)
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential area is likely to cause harmful in-
terference in which case the user will be required to correct the interference at his own expense.
7WARNING
- The design and production of this unit conform to FCC regulations, and any changes or modifications
must be registered with the FCC and are subject to FCC control. Any changes made by the purchaser
or user without first contacting the manufacturer will be subject to penalty under FCC regulations.
- This device must be used with a shielded interface cable. The use of non-shielded cables is likely to
result in interference with radio communications and is prohibited under FCC rules.
Module Name, Option Frequency Band Radiation Power
UK-215 includes approved Wireless module,
MODEL DAUB-KM66:
2.4 GHz Max. 20 dBm
5 GHz Max. 23 dBm
EK-609 includes approved Wireless module,
MODEL MBH7BLZ02:
2.4 GHz Max. 3 dBm
AU-201S Authentication Unit: 13.56 MHz Max. -27 dBm
AT BE BG CH CY CZ DE DK EE
EL ES FI FR HR HU IE IS IT
LI LT LU LV MT NL NO PL PT
RO SE SI SK TR UK
1-12 bizhub C658/C558/C458/C368/C308/C258
Regulation notices
1
1.4
INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 5) (for
Canada users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
For users in countries not subject to class B regulations
7WARNING
- This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
- This device must be used with a shielded interface cable. The use of non-shielded cables is likely to
result in interference with radio communications and is prohibited under CISPR rules and local rules.
GS Certification
This device is not intended for use in the direct field of view at visual display workplaces. To avoid incom-
moding reflexions at visual display workplaces this device must not be placed in the direct field of view.
Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen.
Um störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittel-
baren Gesichtsfeld platziert werden.
Laser safety
This is a digital machine which operates using a laser. There is no possibility of danger from the laser provided
the machine is operated according to the instructions in the manuals.
Since radiation emitted by the laser is completely confined within protective housing, the laser beam cannot
escape from the machine during any phase of user operation.
This machine is certified as a Class 1 laser product per IEC 60825-1: 2014: This means the machine does not
produce hazardous laser radiation.
Internal laser radiation
Maximum Average Radiation Power: 15.1 W (bizhub C658) / 13.1 W (bizhub C558) / 10.1 W (bizhub C458)
/ 8.1 µW (bizhub C368) / 7.1 µW (bizhub C308/C258) at the laser aperture of the print head unit.
Wavelength: 775-800 nm (bizhub C658/C558) / 770-800 nm (bizhub C458/C368/C308/C258)
This product employs a Class 3B laser diode that emits an invisible laser beam.
The laser diode and the scanning polygon mirror are incorporated in the print head unit.
The print head unit is NOT A FIELD SERVICE ITEM:
Therefore, the print head unit should not be opened under any circumstances.
bizhub C658/C558/C458
Laser Aperture of
the Print Head Unit
Print Head
bizhub C658/C558/C458/C368/C308/C258 1-13
1.4 Regulation notices
1
bizhub C368/C308/C258
CDRH regulations
This machine is certified as a Class 1 Laser product under Radiation Performance Standard according to the
Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United
States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device
does not produce hazardous laser radiation.
The label shown on page 1-14 indicates compliance with the CDRH regulations and must be attached to la-
ser products marketed in the United States.
7WARNING
Use of controls, adjustments or performance of procedures other than those specified in this manual
may result in hazardous radiation exposure.
- This is a semiconductor laser. The maximum power of the laser diode is 25 mW and the wavelength is
775-800 nm (bizhub C658/C558) or 770-800 nm (bizhub C458).
- This is a semiconductor laser. The maximum power of the laser diode is 15 mW and the wavelength is
770-800 nm (bizhub C368/C308/C258).
For European users
7WARNING
Use of controls, adjustments or performance of procedures other than those specified in this manual
may result in hazardous radiation exposure.
- This is a semiconductor laser. The maximum power of the laser diode is 25 mW and the wavelength is
775-800 nm (bizhub C658/C558) or 770-800 nm (bizhub C458).
- This is a semiconductor laser. The maximum power of the laser diode is 15 mW and the wavelength is
770-800 nm (bizhub C368/C308/C258).
Laser Aperture of
the Print Head Unit
Print Head
1-14 bizhub C658/C558/C458/C368/C308/C258
Regulation notices
1
1.4
Laser safety label
A laser safety label is attached to the outside of the machine, as shown below.
bizhub C658/C558/C458
bizhub C368/C308/C258
Ozone release
Locate the Machine in a Well-Ventilated Room
A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may,
however, be created in poorly ventilated rooms during extensive machine operations. For a comfortable,
healthy and safe operating environment, it is recommended that the room be well ventilated.
Placer l’appareil dans une pièce largement ventilée
Une quantité d’ozone négligable est dégagée pendant le fonctionnement de l’appareil quand celui-ci est uti-
lisé normalement. Cependant, une odeur désagréable peut être ressentie dans les pièces dont l’aération est
insuffisante et lorsque une utilisation prolongée de l’appareil est effectuée. Pour avoir la certitude de travailler
dans un environnment réunissant des conditions de confort, santé et de sécurité, il est préférable de bien
aérer la pièce ou se trouve l’appareil.
Acoustic noise (for European users only)
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäß EN ISO 7779.
or/and complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to laser notice no.50,
dated June 24, 2007
or/and complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to laser notice no.50,
dated June 24, 2007
bizhub C658/C558/C458/C368/C308/C258 1-15
1.4 Regulation notices
1
For EU member states only
This symbol means: Do not dispose of this product together with your household
waste!
Please refer to the information of your local community or contact our dealers re-
grading the proper handling of end-of-life electric and electronic equipments. Re-
cycling of this product will help to conserve natural resources and prevent
potential negative consequences for the environment and human health caused
by inappropriate waste handling.
This product complies with RoHS (2011/65/EU) Directive.
Telephone cable (for users in countries subject to class B regulations)
Connect a telephone cable with a ferrite core to the telecommunication port of this machine. (Connect the
modular jack on the ferrite-core-equipped end of the telephone cable to the telecommunication port.)
USB Host
Connect USB devices (Memory, Authentication, Hub etc.) devices directly to the USB host. If an extension
cable is used, electromagnetic interference could occur.
1-16 bizhub C658/C558/C458/C368/C308/C258
Regulation notices
1
1.4
Graphic symbols used on this machine
These are some of major exemplary graphical symbols.
Graphic
symbols
Descriptions Graphic
symbols
Descriptions Graphic
symbols
Descriptions
"ON" position "OFF" position STAND-BY
push-push type
switches
Ground/Earth (Pro-
tective bonding ter-
minal)
Ground/Earth (Pro-
tective earthing)
CLASS II EQUIP-
MENT
Class II equipment
with functional
earthing
Functional earthing
General precaution High temperature Electrical shock
hazard
CAUTION
moving fan blade
CAUTION
DOUBLE POLE /
NEUTRAL FUSING
bizhub C658/C558/C458/C368/C308/C258 1-17
1.5 Caution notations and labels
1
1.5 Caution notations and labels
Safety precaution notations and labels appear on this machine at the following positions.Be very careful that
an accident does not occur when operations such as removing paper jams and staple jams are performed.
bizhub C658/C558/C458
NOTICE
Do not remove caution labels or notations. If any caution label or caution notation is soiled, please clean to
make legible. If you cannot make them legible, or if the caution label or notation is damaged, please contact
your service representative.
1-18 bizhub C658/C558/C458/C368/C308/C258
Caution notations and labels
1
1.5
bizhub C368/C308/C258
NOTICE
Do not remove caution labels or notations. If any caution label or caution notation is soiled, please clean to
make legible. If you cannot make them legible, or if the caution label or notation is damaged, please contact
your service representative.
bizhub C658/C558/C458/C368/C308/C258 1-19
1.6 Special notice to user
1
1.6 Special notice to user
For Europe
The Facsimile has been confirmed to meet the standards (or requirements) ETSI for pan-European single ter-
minal connection to the public switched telephone network (PSTN).
1-20 bizhub C658/C558/C458/C368/C308/C258
Space requirements
1
1.7
1.7 Space requirements
To ensure that machine operation, consumables replenishing, part replacement, and regular maintenance
can easily be performed, adhere to the recommended space requirements detailed below.
bizhub C658/C558/C458
NOTICE
Be sure to allow a clearance of 8 inches (200 mm) or more at the back of this machine for the ventilation duct.
bizhub C658/C558/C458 + PC-215 + FS-537 SD + RU-513 + PI-507 + LU-207
97-1/2 (2477)
24-11/16
(627)
49
(1244)
49-7/8 (1267)
61-7/16 (1560.5)
37-1/2
(953)
13-15/16
(353.5)
16-9/16
(420)
33-3/8
(847)
10
(254)
17-13/16
(452)
Unit: inch (mm)
15/16 (24)
5-1/8 (130)
bizhub C658/C558/C458 + PC-215 + FS-536 SD + RU-513 + PI-507 + LU-302 Unit: inch (mm)
82-3/8 (2092)
20-13/16
(528)
38-11/16
(982)
49-7/8 (1267)
61-7/16 (1560.5)
37-1/2
(953)
13-15/16
(353.5)
16-9/16
(420)
33-3/8
(847)
10
(254)
17-13/16
(452)
4-1/2 (115)
9/16 (15)
bizhub C558/C458 + PC-215 + FS-533 + MK-730 + CU-102 Unit: inch (mm)
52-7/16 (1332)
6-11/16
(170)
24-3/16
(615)
49-7/8 (1267)
61-7/16 (1560.5)
37-1/2
(953)
13-15/16
(353.5)
16-9/16
(420)
33-3/8
(847)
10
(254)
11-5/8
(295)
9-15/16
(252)
bizhub C658/C558/C458/C368/C308/C258 1-21
1.7 Space requirements
1
bizhub C368/C308/C258
NOTICE
Be sure to allow a clearance of 8 inches (200 mm) or more at the back of this machine for the ventilation duct.
bizhub C368/C308/C258 + DF-629 + PC-210 + FS-534 SD + RU-513 + LU-302
83-5/8 (2124)
25-7/8
(658)
38-13/16
(986)
48-13/16 (1240)
61 (1550)
35-3/8
(898)
15-11/16
(398)
16-7/8
(428)
31-15/16
(812)
10
(254)
18-7/8
(480)
Unit: inch (mm)
bizhub C368/C308/C258 + DF-704 + PC-210 + FS-533
6-11/16
(170)
43-6/9 (1107)
Unit: inch (mm)
36-7/8
(937)
49-1/16 (1246)
61-1/8 (1553)
35-15/16
(913)
15-3/16
(386)
16-7/8
(428)
32-3/16
(818)
10
(254)
bizhub C368/C308/C258 + DF-629 + PC-210 + JS-506 + MK-730 + CU-101 + MK-745
45-3/4 (1162)
Unit: inch (mm)
34-1/8
(867)
11-5/8
(295)
48-13/16 (1240)
61 (1550)
35-3/8
(898)
15-11/16
(398)
16-7/8
(428)
31-15/16
(812)
10
(254)
1-22 bizhub C658/C558/C458/C368/C308/C258
Operation precautions
1
1.8
1.8 Operation precautions
To ensure the optimum performance of this machine, observe the precautions described below.
Power source
The power source requirements are as follows.
- Voltage fluctuation: Maximum ± 10% (at 110 V/120 V/220 to 240 V AC)
- Frequency fluctuation: Maximum ± 3 Hz (at 50 Hz/60 Hz)
- Use a power source with as little voltage or frequency fluctuations as possible.
Operating environment
The environmental requirements for correct operation of the machine are as follows.
- Temperature: 50°F (10°C) to 86°F (30°C) with fluctuations of no more than 18°F (10°C) within an hour
- Humidity: 15% to 85% with fluctuations of no more than 10% within an hour
Storage of copies
To store copies, follow the recommendation listed below.
- Copies that are to be kept for a long time should be kept where they are not exposed to light in order
to prevent them from fading.
- Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies.
- Color copies have a thicker layer of toner than normal black-and-white copies. Therefore, when a color
copy is folded, the toner at the fold may peel off.
Data stored in this machine
For the machine with hard disk, it is suggested to delete all data stored in all hard disk areas using the over-
write all data function to prevent leakage of data prior to transfer or disposal of the machine, or returning of
the leased machine.
For details of the overwrite all data function, refer to the User's Guide. Contact your service representative
before deleting data.
It is recommended to backup HDD periodically as the measures for HDD defect. For the detail information of
HDD backup, contact your service representative.
bizhub C658/C558/C458/C368/C308/C258 1-23
1.9 Legal restrictions on reproduction
1
1.9 Legal restrictions on reproduction
Certain types of originals must never be reproduced with the purpose or intent to pass reproductions of such
originals off as the originals.
The following is not a complete list, but is meant to be used as a guide to responsible reproduction.
<Financial Instruments>
- Personal checks
- Traveler’s checks
- Money orders
- Certificates of deposit
- Bonds or other certificates of indebtedness
- Stock certificates
<Legal Originals>
- Food stamps
- Postage stamps (canceled or uncanceled)
- Checks or drafts drawn by government agencies
- Internal revenue stamps (canceled or uncanceled)
- Passports
- Immigration papers
- Motor vehicle licenses and titles
- House and property titles and deeds
<General>
- Identification cards, badges, or insignias
- Copyrighted works without permission of the copyright owner
In addition, it is prohibited under any circumstances to reproduce domestic or foreign currencies, or works
of art without permission of the copyright owner.
When in doubt about the nature of an original, consult with legal counsel.
NOTICE
This machine provides the forgery prevention function in order to prevent financial instruments from being re-
produced illegally.
We appreciate your understanding that printed images may infrequently have some noise or image data may
not be stored under certain circumstances due to this forgery prevention function.
1-24 bizhub C658/C558/C458/C368/C308/C258
Trademark acknowledgements
1
1.10
1.10 Trademark acknowledgements
KONICA MINOLTA, the KONICA MINOLTA logo, Giving Shape to Ideas, PageScope, and bizhub are regis-
tered trademarks or trademarks of KONICA MINOLTA, INC.
Mozilla and Firefox are trademarks of the Mozilla Foundation.
Microsoft, Windows, Windows 7, Windows 8.1, and Windows 10 are either registered trademarks or trade-
marks of Microsoft Corporation in the United States and/or other countries.
PowerPC is a trademark of IBM Corporation in the United States, or other countries, or both.
Citrix
®
, XenApp
®
, XenDesktop
®
and XenServer
®
are registered trademarks of Citrix Systems, Inc. and/or one
or more of its subsidiaries, and may be registered in the United States Patent and Trademark Office and in
other countries.
Apple, Safari, iPad, iPhone, iPod touch, Macintosh, Mac OS, OS X, macOS and Bonjour are trademarks of
Apple Inc., registered in the U.S. and other countries. AirPrint and the AirPrint logo are trademarks of Apple
Inc.
CUPS and CUPS logo are trademarks of Apple Inc.
Google, Google Chrome, Android, and Google Cloud Print are registered trademarks or trademarks of Goog-
le Inc.
Mopria
®
, the Mopria
®
Logo and Mopria
®
Alliance logo are registered trademarks and service marks of Mo-
pria Alliance, Inc. in the United States and other countries. Unauthorized use is strictly prohibited.
Adobe, the Adobe logo, Acrobat and PostScript are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
This [Sublicensee Product] contains Adobe
®
Reader
®
LE software under license from Adobe Systems Incor-
porated, Copyright © 1995-2009 Adobe Systems Incorporated. All rights reserved. Adobe and Reader are
trademarks of Adobe Systems Incorporated.
Ethernet is a registered trademark of Xerox Corporation.
PCL is a registered trademark of Hewlett-Packard Company Limited.
This machine and PageScope Box Operator are based in part on the work of the Independent JPEG Group.
Compact-VJE
Copyright 1986-2009 Yahoo Japan Corp.
RC4
®
is a registered trademark or trademark of EMC Corporation in the United States and/or other countries.
RSA and BSAFE are registered trademarks or trademarks of EMC Corporation in the United States and other
countries.
License information
[This product/Product name] includes RSA BSAFE
®
Cryptographic software from EMC Corporation.
Advanced Wnn
"Advanced Wnn"© OMRON SOFTWARE CO., Ltd. 2006 All Rights Reserved.
bizhub C658/C558/C458/C368/C308/C258 1-25
1.10 Trademark acknowledgements
1
ABBYY and FineReader are registered trade marks of ABBYY Software House.
ThinPrint is a registered trademark or trademark of Cortado AG in Germany and other countries.
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
Wi-Fi, the Wi-Fi CERTIFIED logo, Wi-Fi Alliance, Wi-Fi Direct, Wi-Fi Protected Setup, the Wi-Fi Protected Set-
up logo, WPA, and WPA2 are either registered trademarks or trademarks of the Wi-Fi Alliance.
FeliCa is a registered trademark of Sony Corporation.
MIFARE is a registered trademark of NXP Semiconductors.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
All other product and brand names are trademarks or registered trademarks of their respective companies or
organizations.
Copyright
KONICA MINOLTA, INC. maintains the copyright of the printer drivers.
© 2016 KONICA MINOLTA, INC. All Rights Reserved.
Note
User's Guide may not be reproduced in part or in full without permission.
KONICA MINOLTA, INC. will not be held liable for any incidents caused by using this printing system or Us-
er's Guide.
Information included in User's Guide is subject to change without notice.
1-26 bizhub C658/C558/C458/C368/C308/C258
SOFTWARE LICENSE AGREEMENT
1
1.11
1.11 SOFTWARE LICENSE AGREEMENT
PLEASE READ CAREFULLY THE LICENSE AGREEMENT BELOW BEFORE DOWNLOADING, INSTALLING
OR USING THE SOFTWARE. DOWNLOADING, INSTALLING OR USING THE SOFTWARE SHALL BE
DEEMED YOUR LAWFUL ACCEPTANCE OF THE TERMS AND CONDITIONS BELOW. IF YOU DO NOT
AGREE TO THEM, DO NOT DOWNLOAD, INSTALL, NOR USE THE SOFTWARE.
1. SOFTWARE
"Software" means this computer program (software), independent from its distribution channel, i.e.
whether downloaded on royalty-free basis (which may include digitally encoded, machine readable,
scalable outline font data as encoded in a special format) or obtained on DVD or any other physical data
carrier, together with all codes, techniques, software tools, format, design, concepts, methods and ide-
as associated with the computer program and all documentation related thereto.
2. COPYRIGHT AND INTELLECTUAL PROPERTY RIGHTS
This is a license agreement and not an agreement for sale. Konica Minolta Business Solutions Europe
GmbH ("Konica Minolta") owns, or has been licensed from other owners ("Konica Minolta Licensor"),
copyrights and other intellectual property rights of the Software, and any and all rights and title to the
Software and any copy made from it are retained by Konica Minolta or Konica Minolta Licensor. In no
event, this Agreement shall be deemed to assign any copyright and/or any intellectual property rights
of the Software from Konica Minolta or Konica Minolta Licensor to you. Except as stated in this Agree-
ment, you are not granted any rights to patents, copyrights, trade names, trademarks (whether regis-
tered or unregistered), or any other rights, franchises or licenses in respect of the Software. The
Software is protected by copyright laws and international treaty provisions.
3. LICENSE
Konica Minolta hereby grants to you, and you agree to accept a non-exclusive, non-transferable and
limited license, and you may:
(i) install and use the Software only on your computer(s) connected via inhouse network with a product
for which this Software is designed;
(ii) allow users of the computers described above to use the Software, provided that you assure that all
such users comply with the terms of this Agreement;
(iii) use the Software only for your own customary business or personal purpose;
(iv) make one copy of the Software only for backup or installation purpose in the support of the normal
and intended use of the Software;
(v) transfer the Software to other party by transferring a copy of this Agreement and all documentation
along with the Software, provided that (a) you must, at the same time, either transfer to such other party
or destroy all your other copies of the Software, (b) such transfer of possession terminates your license
from Konica Minolta, and (c) you must assure that such other party has agreed to accept and be bound
by the terms and conditions of this Agreement. If such other party does not accept such terms and con-
ditions then you shall not transfer any copy of the Software.
4. RESTRICTIONS
(1) You must not without the prior written consent of Konica Minolta:
(i) use, copy, modify, merge or transfer copies of the Software except as provided herein;
(ii) reverse engineer, reverse assemble, reverse compile or any other way analyze the Software except
permitted by law;
(iii) sublicense, rent, lease or distribute the Software or any copy thereof; or
(iv) remove, use, or alter any trademark, logo, copyright or other proprietary notices, legends, symbols
or labels in the Software.
(2) You agree that you will not export the Software in any form in violation of any applicable laws and
regulations regarding export control of any country.
5. LIMITED WARRANTIES
The Software is provided to you "as is" without any warranties whatsoever. The express terms of this
Agreement are in lieu of all other warranties, express or implied and Konica Minolta, its affiliate compa-
nies and Konica Minolta Licensor disclaim all warranties with regard to the Software, express or implied,
including, without limitation, implied warranties of merchantability, fitness for a particular purpose and
non-infringement of third party rights. The disclaimer of warranty hereunder does not affect your stat-
utory rights. In case of the disclaimer is not allowed by applicable law, the disclaimer shall only apply
to you to the maximum extent permitted by the law.
6. LIMITATION OF REMEDIES
In no event will Konica Minolta, its affiliate companies nor Konica Minolta Licensor be liable for any lost
profits, lost data, or any other indirect, special, punitive, incidental or consequential damages that result
from use or inability to use the Software, even if Konica Minolta, its affiliate companies, its authorized
remarketers or Konica Minolta Licensor have been advised of the possibility of such damages or for any
claim by you based on a third party claim.
bizhub C658/C558/C458/C368/C308/C258 1-27
1.11 SOFTWARE LICENSE AGREEMENT
1
7. TERMINATION
You may terminate this license at any time by destroying the Software and all your copies of it. This
Agreement shall also terminate if you fail to comply with any terms hereof. Upon such termination, you
must immediately destroy all copies of the Software in your possession.
8. GOVERNING LAW
This Agreement shall be governed by the laws of the country where the delivery is made to the original
customer.
9. SEVERABILITY
In the event that any part or parts of this Agreement shall be held illegal or null and void by any court or
administrative body of competent jurisdiction, such determination shall not affect the remaining parts
of this Agreement and they shall remain in full force and effect as if such part or parts determined illegal
or void had not been included.
10. NOTICE TO US GOVERNMENT END USERS
The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (October 1995), con-
sisting of "commercial computer software" and "commercial computer software documentation," as
such terms are used in 48 C.F.R. 12.212 (September 1995). Consistent with 48 C.F.R. 12.212 and 48
C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users shall acquire the
Software with only those rights set forth herein.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE
BOUND BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY OTHER STATE-
MENTS OR REPRESENTATIONS THAT ARE INCONSISTENT WITH THE TERMS AND CONDITIONS OF
THIS AGREEMENT. NO AMENDMENT TO THIS AGREEMENT IS EFFECTIVE UNLESS IN WRITING AND
SIGNED BY DULY AUTHORIZED REPRESENTATIVES OF EACH PARTY.
1-28 bizhub C658/C558/C458/C368/C308/C258
i-Option LK-105 v4 (searchable PDFs) End User License Agreement
1
1.12
1.12 i-Option LK-105 v4 (searchable PDFs) End User License Agree-
ment
Subject to your purchase of a license key of i-Option LK-105 v4 (searchable PDFs, or "Program"), KONICA
MINOLTA, INC. (KM) grants you a non-exclusive and non-transferable sublicense to use the Program provid-
ed that you comply with all terms and conditions stated in this Agreement.
1. You agree not to reproduce, modify, or adapt the Program. You may not allow a third party to use the
Program or transfer it to a third party.
2. You agree that you will not attempt to alter, disassemble, decrypt, reverse engineer, or decompile the
Program.
3. KM or its licensor own the copyright and other intellectual property rights. No copyright or other intel-
lectual property rights shall be transferred to you through the granting to you of a license to use the
Program.
4. IN NO EVENT WILL KM OR ITS LICENSOR BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCI-
DENTAL INDIRECT, PUNITIVE OR SPECIAL DAMAGES, INCLUDING ANY LOST PROFITS OR LOST
SAVING, EVEN IF KM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY
CLAIM BY ANY THIRD PARTY. KM OR ITS LICENSOR DISCLAIMS ALL WARRANTIES WITH REGARD
TO THE PROGRAM, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION IMPLIED WARRAN-
TIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGE-
MENT OF THIRD PARTY RIGHTS. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, SO THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
5. You agree that you will not export the Program in any form in violation of any applicable laws and reg-
ulations regarding export control of any countries.
6. Notice to Government End Users (this provision shall apply to U.S. government end users only) The Pro-
gram is a "commercial item," as that term is defined at 48 C.F.R.2.101, consisting of "commercial com-
puter software" and "commercial computer software documentation," as such terms are used in 48
C.F.R. 12.212. Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4, all U.S.
Government End Users acquire the Program with only those rights set forth herein.
7. This license shall automatically terminate upon a failure on your part to comply with any term or condi-
tion of this Agreement, in which case you agree to immediately stop use of the Program.
8. This Agreement shall be governed by the laws of Japan.
2
About This Machine
bizhub C658/C558/C458/C368/C308/C258 2-3
2.1 Intended use of office MFP devices
2
2 About This Machine
2.1 Intended use of office MFP devices
Intended use
This Multi Function Product incorporates the functionality of multiple office devices in one. It is designed to
be used as an office system for the following purposes:
- Print, copy, scan and fax documents.
- Use available finishing functions such as duplexing, stapling, hole-punching and booklet creation if ap-
propriate options are installed.
- Store scanned documents on external USB memory devices; send scanned documents to network
scan destinations such as FTP, WebDAV and E-mail.
The intended use also requires that:
- The system is used within the limits of device specifications and specifications of optional components,
- All safety instructions in the related user's guides are observed,
- Legal restrictions on reproduction (see page 1-23) are observed,
- Inspection and maintenance instructions are adhered to,
- General, national and company safety provisions are observed.
Impermissible operating conditions
The system may not be operated if:
- Errors or damage have been discovered,
- Maintenance intervals have been exceeded,
- Mechanical or electrical functions do not work as they should.
Exclusion of liability
The manufacturer of the system assumes no liability for damages if the system was operated under imper-
missible conditions.
2-4 bizhub C658/C558/C458/C368/C308/C258
Introduction to user's guide
2
2.2
2.2 Introduction to user's guide
The user's guide of this product consists of the [Quick Guide] and the User's Guide CD/DVD.
The [Quick Guide] describes basic machine procedures and frequently asked questions.
If you want to learn about more detailed functions or operation methods, refer to the User's Guide included
in the User's Guide CD/DVD.
In addition, you can access [Frequently Asked Questions] on the top page (home) of the relevant file on the
User's Guide CD/DVD for detailed information on FAQs and troubleshooting.
2.2.1 [Quick Guide] (this manual)
This manual describes basic procedures users will need to know in order to use this machine, as well as set-
ting procedures. It also introduces major functions, and basic troubleshooting procedures to make use of this
machine more conveniently.
This manual also contains notes and precautions that should be followed in order to use this machine. Please
be sure to read this manual before using this machine.
2.2.2 User's Guide CD/DVD
The User's Guide CD/DVD is provided with this machine.
This CD/DVD contains basic and detailed information on the functions of this product and also explanations
of other various setting functions.
Select a desired function on the top page (Home), and check the details of the function.
Selecting [Introduction] on the top page (Home) allows you to view detailed methods for using the User's
Guide.
bizhub C658/C558/C458/C368/C308/C258 2-5
2.2 Introduction to user's guide
2
Layout of top page
Operating environment
No. Name Description
1 [Search by Function] Searches for desired information based on functions such as print-
ing or scanning, and based on buttons displayed on the Touch
Panel.
2 [Search] Enter one or multiple keywords to search within the User's Guide. If
necessary, you can distinguish between upper and lower case al-
phabet characters to carry out a search. (Some pages are not tar-
geted for searching.)
3 [Search by Usage] Searches for the required operations of this machine based on a re-
quest "to do something". This function also provides security meas-
ures against various situations and methods to realize cost
reductions.
4 [Search by Illustration] Searches for the required operations of this machine based on the
output results, functions, and operation images.
1
2
3
4
Item Specifications
Supported Operating Systems Windows 7 (SP1), Windows 8.1, Windows 10
Mac OS 10.8/10.9/10.10/10.11/10.12
Supported Web browsers Windows: Microsoft Internet Explorer 9.x/10.x (Desktop version)/
11.x (Desktop version), Microsoft Edge, Firefox 20 or later, Google
Chrome 26 or later
Mac OS: Safari 6.0.3 to 10.x
We recommend that you use the latest Web browser that is com-
patible with your operating system to help you use this machine
more conveniently and comfortably.
Check that JavaScript in your Web browser is enabled. The Us-
er's Guide uses JavaScript for the page display and search func-
tions.
Display resolution 1024 e 768 pixels or more
2-6 bizhub C658/C558/C458/C368/C308/C258
Introduction to user's guide
2
2.2
2.2.3 Target groups
The user's guides (see page 2-4) are intended for the following users of the system:
Everyone who uses this system must have read and understood the related user's guides.
2.2.4 Symbols and notations used in this manual
Procedural instruction
0 This check mark symbol shows a precondition of a procedure.
1 This format number "1" represents the first step.
2 This format number represents the order of serial steps.
% This symbol indicates a supplementary explanation of a procedural instruction.
User Persons using the system for its intended use (see page 2-3) as well as
managing system functions and consumables according to the assigned
user rights.
Administrator Persons managing consumables, system functions, users and access
rights; adjusting system settings, and establishing network connections.
bizhub C658/C558/C458/C368/C308/C258 2-7
2.2 Introduction to user's guide
2
Symbols and notations
7WARNING
- Improper handling can cause serious injury or death.
7CAUTION
- Improper handling can cause minor injury or damage to houses and property.
NOTICE
This symbol indicates a risk that may result in damage to this machine or documents. Follow the instructions
to avoid property damage.
Tips
- This symbol indicates supplemental information of a topic as well as options required to use a function.
dReference
This symbol indicates reference functions related to a topic.
Related setting
This shows the settings related to a particular topic for any user.
Related setting (for the administrator)
This shows the settings related to a topic only for administrators.
Screens
Some of the screen displays for this machine vary depending on whether the fax function is available.
This manual describes procedures using the screen displays when the fax function is available. When the fax
function is not available, change "Scan/Fax" to "SCAN" to read a description.
Names and notations of applications
This manual uses a notation for each application name as shown below.
Symbols/Notations Description
0 This check mark symbol shows a precondition of a
procedure.
% This symbol indicates a supplementary explanation
of a procedural instruction.
[ ] An item enclosed by brackets [ ] indicates a key
name on the Touch Panel or computer screen, or
the name of a user's guide.
Bold text This presents a key name, part name, product name,
or option name on the Control Panel.
Name Notations used in this manual
PageScope Web Connection Web Connection
PageScope My Panel Manager My Panel Manager
2-8 bizhub C658/C558/C458/C368/C308/C258
About this machine
2
2.3
2.3 About this machine
2.3.1 Optional components (bizhub C658/C558/C458)
Various optional components can be added to meet your office requirements.
List of optional components
No. Name Description
1 Main Unit Scans the original in the scanner section, and prints a scanned im-
age in the printer section.
2 Fax Kit FK-514 Required to use the fax function.
3 Clean Unit CU-102 Collects small particles (UFP) generated in this machine to prevent
them from escaping this machine.
bizhub C658/C558/C458/C368/C308/C258 2-9
2.3 About this machine
2
4 Authentication Unit
AU-102
Performs user authentication by scanning vein patterns in the fin-
ger.
The Working Table WT-506 is required to install the Authentica-
tion Unit AU-102.
5 Authentication Unit
AU-201S
Performs user authentication by scanning information recorded on
the IC card or NFC-compatible Android terminal.
The Mount Kit MK-735 is required to install the Authentication
Unit AU-201S.
This unit can also be installed on the Working Table WT-506.
6 Working Table WT-506 Provides an area to temporarily place an original or other materials.
This is also used when the Authentication Unit AU-102 or Authen-
tication Unit AU-201S is installed.
7 Keypad KP-101 It is equipped on the side of the Control Panel. Allows you to enter
numbers by using the Hardware Keypad.
8 Keyboard Holder KH-102 Install this holder to use an external keyboard.
9 Security Kit SC-508 Supports functions such as Copy Guard to prevent unauthorized
copying.
10 Fax Mount Kit MK-742 This unit is required to install FAX Kit FK-515.
This option can be used in North America.
11 FAX Kit FK-515 Used to add telephone lines.
Fax Mount Kit MK-742 is required to install FAX Kit FK-515.
This option can be used in North America.
12 Mount Kit MK-730 Used to print on banner paper.
13 Large Capacity Unit
LU-302
Allows you to load up to 3000 sheets of 8-1/2 e 11 (A4) size paper.
To install the Large Capacity Unit LU-302, the Paper Feed Cabi-
net PC-415, Paper Feed Cabinet PC-115, or Paper Feed Cabinet
PC-215 must be installed on this machine.
14 Large Capacity Unit
LU-207
Allows you to load up to 2500 sheets of SRA3 or 11 e 17 (A3) size
paper.
To install the Large Capacity Unit LU-207, the Paper Feed Cabi-
net PC-415, Paper Feed Cabinet PC-115, or Paper Feed Cabinet
PC-215
must be installed on this machine.
15 Image Controller IC-416 Built-in Image Controller. Installing this unit provides higher quality
printing results.
Video Interface Kit VI-510 is required to install Image Controller
IC-416. Also, Desk DK-510, Paper Feed Cabinet PC-415, Paper
Feed Cabinet PC-115, or Paper Feed Cabinet PC-215 must be in-
stalled on this machine.
16 Desk DK-705 Used to place this machine on the floor.
17 Desk DK-510 Used to place this machine on the floor.
18 Paper Feed Cabinet
PC-415
Can load up to 2500 sheets of 8-1/2 e 11 (A4) size paper.
19 Paper Feed Cabinet
PC-215
Can load up to 500 sheets respectively into the top and bottom
trays.
20 Paper Feed Cabinet
PC-115
Can load up to 500 sheets into the top tray. (The bottom tray is a
storage box.)
21 Output Tray OT-506 Collects printed pages.
22 Job Separator JS-506 Used to separate output sheets into two trays in the body of the ma-
chine.
This unit can only be installed in the bizhub C558/C458.
23 Finisher FS-533 Sorts, groups, or staples output sheets as required. This unit can be
installed in this machine.
This unit can only be installed in the bizhub C558/C458.
24 Punch Kit PK-519 Used to add the punch function to the Finisher FS-533.
This unit can only be installed in the bizhub C558/C458.
No. Name Description
2-10 bizhub C658/C558/C458/C368/C308/C258
About this machine
2
2.3
List of other optional components
The following options are built into this machine and are not shown in the figure.
25 Finisher FS-536 Sorts, groups, or staples output sheets as required. To install the
Finisher FS-536, the Relay Unit RU-513 is required. Also, Desk
DK-510, Paper Feed Cabinet PC-415, Paper Feed Cabinet PC-
115, or Paper Feed Cabinet PC-215 must be installed on this ma-
chine.
26 Finisher FS-536 SD Sorts, groups, staples, folds, and binds printed paper before out-
putting it.
To install the Finisher FS-536 SD, the Relay Unit RU-513 is re-
quired. Also, Desk DK-510, Paper Feed Cabinet PC-415, Paper
Feed Cabinet PC-115, or Paper Feed Cabinet PC-215 must be in-
stalled on this machine.
The Finisher FS-536 contains the Saddle Stitcher.
27 Punch Kit PK-520 Used to add the punch function to the Finisher FS-536/FS-536 SD.
28 Relay Unit RU-513 Required to install the Finisher FS-536/FS-536 SD or Finisher
FS-537/FS-537 SD.
29 Finisher FS-537 SD Sorts, groups, staples, folds, and binds printed paper before out-
putting it.
To install the Finisher FS-537 SD, the Relay Unit RU-513 is re-
quired. Also, Desk DK-510, Paper Feed Cabinet PC-415, Paper
Feed Cabinet PC-115, or Paper Feed Cabinet PC-215 must be in-
stalled on this machine.
The Finisher FS-537 contains the Saddle Stitcher.
30 Finisher FS-537 Sorts, groups, or staples output sheets as required. To install the
Finisher FS-537, the Relay Unit RU-513 is required. Also, Desk
DK-510, Paper Feed Cabinet PC-415, Paper Feed Cabinet
PC-115, or Paper Feed Cabinet PC-215 must be installed on this
machine.
31 Punch Kit PK-523
Used to add the punch function to the Finisher FS-537/FS-537 SD.
32 Z Folding Unit ZU-609 Adds the Z-fold function to the Finisher FS-537/FS-537 SD.
33 Post Inserter PI-507 Install this unit onto the Finisher FS-537/FS-537 SD.
This unit allows you to insert cover sheets into the copied or printed
sheets. This unit also allows you to manually operate the finisher
(only the lower tray is available).
34 Job Separator JS-602 Install this unit onto the Finisher FS-537/FS-537 SD.
This unit sorts printed sheets.
No. Name Description
No. Name Description
1 Stamp Unit SP-501 Stamps a scanned original when sending a fax.
2 Spare TX Marker Stamp
2
A replacement stamp for the Stamp Unit SP-501.
3 Local Interface Kit
EK-609
Install this unit when using the linkage function with a Bluetooth LE-
compatible iOS terminal. For details on the linkage function with an
iOS terminal, refer to the User's Guide CD/DVD.
4 Video Interface Kit
VI-510
This unit is required to install Image Controller IC-416.
5 i-Option LK-102 v3 Supports the PDF processing function that is one of the advanced
functions.
6 i-Option LK-105 v4 Supports the searchable PDF function that is one of the advanced
functions.
7 i-Option LK-106 Used to add a bar code font that is one of special fonts.
8 i-Option LK-107 Used to add a unicode font that is one of special fonts.
9 i-Option LK-108 Used to add an OCR font that is one of special fonts.
In the standard, the OCR-B font (PostScript) is available. Installing
the i-Option LK-108 allows use of the OCR-A font (PCL).
bizhub C658/C558/C458/C368/C308/C258 2-11
2.3 About this machine
2
10 i-Option LK-110 v2 Supports advanced functions such as a function that converts a file
into a DOCX or XLSX type, a function that generates highly-func-
tional and high quality data, and the E-mail RX Print function. i-Op-
tion LK-110 v2 includes the function licenses for i-Option LK-102
v3 and i-Option LK-105 v4. If you purchase i-Option LK-110 v2,
you do not need to purchase i-Option LK-102 v3 or i-Option
LK-105 v4. For details on the available functions, refer to the User's
Guide CD/DVD.
11 i-Option LK-111 Supports the ThinPrint function that is one of the advanced func-
tions.
12 i-Option LK-114 Supports the serverless pull printing function that is one of the ad-
vanced functions.
13 i-Option LK-115 v2 You can use TPM (Trusted Platform Module) that is one of the ad-
vanced functions. Security enhancement is realized by encrypting
confidential information such as certificates and passwords of this
machine.
14 Upgrade Kit UK-212 Allows you to use this machine in a wireless network environment.
15 Upgrade Kit UK-215 Allows you to use this machine in a wireless network environment.
The Upgrade Kit UK-215 is only available in some areas.
16 Heater HT-509 Prevents paper in a paper tray from being affected by humidity.
The Heater HT-509 can be mounted when you purchase the Paper
Feed Cabinet PC-115, Paper Feed Cabinet PC-215, Paper Feed
Cabinet PC-415, or Desk DK-510.
17 Power Supply BOX
MK-734
Used to turn the Heater operations on or off.
The Power Supply BOX MK-734 can be mounted when you pur-
chase the Paper Feed Cabinet PC-115, Paper Feed Cabinet
PC-215, Paper Feed Cabinet PC-415, or Desk DK-510.
18 Transformer kit TK-101 This unit is required to enable the Heater of the Large Capacity
Unit LU-302 or Large Capacity Unit LU-207 to function.
19 Double feed detection
Kit UK-501
This unit allows you to detect that pages of the original are multi-
plexed on the ADF.
20 Mount Kit MK-735 Required to use the machine unit that has Authentication Unit
AU-201S built in to it.
21 Hard Disk HD-524 Install this unit to perform mirroring of the hard disk contained in the
main unit.
No. Name Description
2-12 bizhub C658/C558/C458/C368/C308/C258
About this machine
2
2.3
2.3.2 Optional components (bizhub C368/C308/C258)
Various optional components can be added to meet your office requirements.
List of optional components
bizhub C658/C558/C458/C368/C308/C258 2-13
2.3 About this machine
2
No. Name Description
1 Main unit Scans the original in the scanner section, and prints a scanned im-
age in the printer section.
2 Original Cover OC-511 Used to fix the loaded originals.
3 Reverse Automatic Doc-
ument Feeder DF-629
Automatically feeds and scans originals by page.
4 Dual Scan Document
Feeder DF-704
Scans the front and back sides of the sheet at the same time. This
enables higher-speed scanning.
5 Fax Kit FK-514 Required to use the fax function.
6 Clean Unit CU-101 Collects small particles (UFP) generated in this machine to prevent
them from escaping this machine.
The Mount Kit MK-745 is required to install Clean Unit CU-101.
7 Mount Kit MK-745 This unit is required to install Clean Unit CU-101.
8 Authentication Unit
AU-102
Performs user authentication by scanning vein patterns in the fin-
ger.
The Working Table WT-506 is required to install the Authentica-
tion Unit AU-102.
9 Authentication Unit
AU-201S
Performs user authentication by scanning information recorded on
the IC card or NFC-compatible Android terminal.
The Mount Kit MK-735 is required to install the Authentication
Unit AU-201S.
This unit can also be installed on the Working Table WT-506.
10 Working Table WT-506 Provides an area to temporarily place an original or other materials.
This is also used when the Authentication Unit AU-102 or Authen-
tication Unit AU-201S is installed.
11 Keypad KP-101 It is equipped on the side of the Control Panel. Allows you to enter
numbers by using the Hardware Keypad.
12 Keyboard Holder KH-102 Install this holder to use an external keyboard.
For details on external keyboards, contact your service representa-
tive.
13 Security Kit SC-508 Supports functions such as Copy Guard to prevent unauthorized
copying.
14 Fax Mount Kit MK-742 This unit is required to install FAX Kit FK-515.
This option can be used in North America.
15 FAX Kit FK-515 Used to add telephone lines.
Fax Mount Kit MK-742 is required to install FAX Kit FK-515.
This option can be used in North America.
16 Mount Kit MK-730 Used to print on banner paper.
17 Large Capacity Unit
LU-302
Allows you to load up to 3000 sheets of 8-1/2 e 11 (A4) size paper.
To install the Large Capacity Unit LU-302, the Paper Feed Cabi-
net PC-410, Paper Feed Cabinet PC-110, or Paper Feed Cabinet
PC-210 must be installed on this machine.
18 Image Controller IC-416 Built-in Image Controller. Installing this unit provides higher quality
printing results.
Video Interface Kit VI-508 is required to install Image Controller
IC-416. Also, Desk DK-510, Paper Feed Cabinet PC-410, Paper
Feed Cabinet PC-110, or Paper Feed Cabinet PC-210 must be in-
stalled on this machine.
19 Desk DK-705 Used to place this machine on the floor.
20 Desk DK-510 Used to place this machine on the floor.
21 Paper Feed Cabinet
PC-410
Can load up to 2500 sheets of 8-1/2 e 11 (A4) size paper.
22 Paper Feed Cabinet
PC-210
Can load up to 500 sheets respectively into the top and bottom
trays.
23 Paper Feed Cabinet
PC-110
Can load up to 500 sheets into the top tray. (The bottom tray is a
storage box.)
2-14 bizhub C658/C558/C458/C368/C308/C258
About this machine
2
2.3
List of other optional components
The following options are built into this machine and are not shown in the figure.
24 Finisher FS-534 Sorts, groups, or staples output sheets as required. To install the
Finisher FS-534, the Relay Unit RU-513 is required. Also, Desk
DK-510, Paper Feed Cabinet PC-410, Paper Feed Cabinet PC-
110, or Paper Feed Cabinet PC-210 must be installed on this ma-
chine.
25 Finisher FS-534 SD Sorts, groups, staples, folds, and binds printed paper before out-
putting it.
To install the Finisher FS-534 SD, the Relay Unit RU-513 is re-
quired. Also, Desk DK-510, Paper Feed Cabinet PC-410, Paper
Feed Cabinet PC-110, or Paper Feed Cabinet PC-210 must be in-
stalled on this machine.
The Finisher FS-534 contains the Saddle Stitcher.
26 Punch Kit PK-520 Used to add the punch function to the Finisher FS-534/FS-534 SD.
27 Relay Unit RU-513 Required to install the Finisher FS-534/FS-534 SD.
28 Finisher FS-533 Sorts, groups, or staples output sheets as required. This unit can be
installed in this machine.
29 Punch Kit PK-519 Used to add the punch function to the Finisher FS-533.
30 Job Separator JS-506 Used to separate output sheets into two trays in the body of the ma-
chine.
No. Name Description
No. Name Description
1 Stamp Unit SP-501 Stamps a scanned original when sending a fax.
2 Spare TX Marker Stamp
2
A replacement stamp for the Stamp Unit SP-501.
3 Local Interface Kit
EK-609
Install this unit when using the linkage function with a Bluetooth LE-
compatible iOS terminal. For details on the linkage function with an
iOS terminal, refer to the User's Guide CD/DVD.
4 Video Interface Kit
VI-508
This unit is required to install Image Controller IC-416.
5 i-Option LK-102 v3 Supports the PDF processing function that is one of the advanced
functions.
6 i-Option LK-105 v4 Supports the searchable PDF function that is one of the advanced
functions.
7 i-Option LK-106 Used to add a bar code font that is one of special fonts.
8 i-Option LK-107 Used to add a unicode font that is one of special fonts.
9 i-Option LK-108 Used to add an OCR font that is one of special fonts.
In the standard, the OCR-B font (PostScript) is available. Installing
the i-Option LK-108 allows use of the OCR-A font (PCL).
10 i-Option LK-110 v2 Supports advanced functions such as a function that converts a file
into a DOCX or XLSX type, a function that generates highly-func-
tional and high quality data, and the E-mail RX Print function. i-Op-
tion LK-110 v2 includes the function licenses for i-Option LK-102
v3 and i-Option LK-105 v4. If you purchase i-Option LK-110 v2,
you do not need to purchase i-Option LK-102 v3 or i-Option LK-
105 v4. For details on the available functions, refer to the User's
Guide CD/DVD.
11 i-Option LK-111 Supports the ThinPrint function that is one of the advanced func-
tions.
12 i-Option LK-114 Supports the serverless pull printing function that is one of the ad-
vanced functions.
bizhub C658/C558/C458/C368/C308/C258 2-15
2.3 About this machine
2
13 i-Option LK-115 v2 You can use TPM (Trusted Platform Module) that is one of the ad-
vanced functions. Security enhancement is realized by encrypting
confidential information such as certificates and passwords of this
machine.
14 Upgrade Kit UK-211 Install this unit when using i-Option LK-102 v3, LK-105 v4,
LK-106, LK-107, LK-108, LK-110 v2, or LK-114.
Install this unit when using My Address in association with My
Panel Manager.
This unit is referred to as Extension Memory in the manual.
15 Upgrade Kit UK-212 Allows you to use this machine in a wireless network environment.
16 Upgrade Kit UK-215 Allows you to use this machine in a wireless network environment.
The Upgrade Kit UK-215 is only available in some areas.
17 Heater HT-509 Prevents paper in a paper tray from being affected by humidity.
The Heater HT-509 can be mounted when you purchase the Paper
Feed Cabinet PC-110, Paper Feed Cabinet PC-210, Paper Feed
Cabinet PC-410, or Desk DK-510.
18 Power Supply BOX
MK-734
Used to turn the Heater operations on or off.
The Power Supply BOX MK-734 can be mounted when you pur-
chase the Paper Feed Cabinet PC-110, Paper Feed Cabinet
PC-210, Paper Feed Cabinet PC-410, or Desk DK-510.
19 Transformer kit TK-101 This unit is required to enable the Heater of the Large Capacity
Unit LU-302 to function.
20 Mount Kit MK-735 Required to use the machine unit that has Authentication Unit
AU-201S built in to it.
21 Hard Disk HD-524 Install this unit to perform mirroring of the hard disk contained in the
main unit.
No. Name Description
2-16 bizhub C658/C558/C458/C368/C308/C258
About this machine
2
2.3
2.3.3 Name of parts (MFP) (bizhub C658/C558/C458)
Front
The illustration shows the main unit that contains the optional Output Tray OT-508 and Paper Feed Cabinet
PC-215.
No. Name Description
1 Control Panel Use the Touch Panel or buttons on this panel to operate this ma-
chine.
2 Original Tray Load the original.
3 Stylus Pen Used to operate the Touch Panel.
4 USB Port (Type A)
USB2.0/1.1
Used to connect an external memory unit (USB memory unit) to this
machine.
5 Bypass Tray Used to load custom-size paper or special paper.
6 Paper-Empty Indicator Flashes orange when a tray runs low on paper and lights up orange
when the tray runs out of paper.
7 Paper Tray Used to load standard-size paper. The number of trays varies de-
pending on the installed Paper Feed Cabinet.
8 Lower Front Door Open this door to replace consumables or to maintenance this ma-
chine.
9 Upper Front Door Open this door to replace a Toner Cartridge.
10 Data Indicator Flashes blue while this machine is receiving a job. If a job is current-
ly spooled, this indicator lamp lights up blue.
11 Status Indicator Flashes white during printing.
bizhub C658/C558/C458/C368/C308/C258 2-17
2.3 About this machine
2
Side/rear
The illustration shows the main unit with the optional Paper Feed Cabinet PC-215, Fax Kit FK-514, FAX Kit
FK-515, Fax Mount Kit MK-742, Power Supply BOX MK-734, and Clean Unit CU-102.
(FAX Kit FK-515 and Fax Mount Kit MK-742 can be used in North America.)
Tips
- The network port of this product is following No.9 and No.10. A port is activated when a network port
inserts a cable.
12 Warning Indicator Flashes orange if a warning occurs. Lights up orange if this machine
has stopped due to an error.
No. Name Description
No. Name
1 Heater Power Switch
2 Power Cord
3 Telephone Jack 4 (LINE PORT4)
4 Telephone Jack 3 (LINE PORT3)
5 Jack for connecting a telephone (TEL PORT1)
6 Telephone Jack 1 (LINE PORT1)
7 Telephone Jack 2 (LINE PORT2)
8 USB Port (Type A) USB2.0/1.1
9 Network Connector (10Base-T/100Base-TX/1000Base-T)
10 USB Port (Type B) USB2.0/1.1
2-18 bizhub C658/C558/C458/C368/C308/C258
About this machine
2
2.3
dReference
For details, refer to the User's Guide CD/DVD.
2.3.4 Name of parts (MFP) (bizhub C368/C308/C258)
Front
The illustration shows the main unit that contains the optional Reverse Automatic Document Feeder
DF-629 and Paper Feed Cabinet PC-210.
No. Name Description
1 Control Panel Use the Touch Panel or buttons on this panel to operate this ma-
chine.
2 Original Tray Load the original.
3 Stylus Pen Used to operate the Touch Panel.
4 USB Port (Type A)
USB2.0/1.1
Used to connect an external memory unit (USB memory unit) to this
machine.
5 Bypass Tray Used to load custom-size paper or special paper.
6 Paper-Empty Indicator Flashes orange when a tray runs low on paper and lights up orange
when the tray runs out of paper.
7 Paper Tray Used to load standard-size paper. The number of trays varies de-
pending on the installed Paper Feed Cabinet.
8 Front Door Open this door to replace consumables or to maintenance this ma-
chine.
bizhub C658/C558/C458/C368/C308/C258 2-19
2.3 About this machine
2
Side/rear
The illustration shows the main unit with the optional Reverse Automatic Document Feeder DF-629,
Paper Feed Cabinet PC-210, Fax Kit FK-514, FAX Kit FK-515, Fax Mount Kit MK-742, Power Supply
BOX MK-734, Clean Unit CU-101, and Mount Kit MK-745.
(FAX Kit FK-515 and Fax Mount Kit MK-742 can be used in North America.)
9 Data Indicator Flashes blue while this machine is receiving a job. If a job is current-
ly spooled, this indicator lamp lights up blue.
10 Status Indicator Flashes white during printing.
11 Warning Indicator Flashes orange if a warning occurs. Lights up orange if this machine
has stopped due to an error.
No. Name Description
No. Name
1 Heater Power Switch
2 Power Cord
3 Telephone Jack 4 (LINE PORT4)
4 Telephone Jack 3 (LINE PORT3)
5 Jack for connecting a telephone (TEL PORT1)
6 Telephone Jack 1 (LINE PORT1)
7 Telephone Jack 2 (LINE PORT2)
8 USB Port (Type A) USB2.0/1.1
9 Network Connector (10Base-T/100Base-TX/1000Base-T)
10 USB Port (Type B) USB2.0/1.1
2-20 bizhub C658/C558/C458/C368/C308/C258
About this machine
2
2.3
Tips
- The network port of this product is following No.9 and No.10. A port is activated when a network port
inserts a cable.
dReference
For details, refer to the User's Guide CD/DVD.
2.3.5 Name of parts (Optional units)
This section shows the names of distinctive parts for each optional unit that can be installed in this machine.
Finisher FS-537, Finisher FS-537 SD, Punch Kit PK-523,
Z Folding Unit ZU-609 (bizhub C658/C558/C458)
No. Name
1 Output Tray
2 Staple Cartridge
3 Punch Kit
4 Punch Scrap Box
5 Saddle Stitcher
bizhub C658/C558/C458/C368/C308/C258 2-21
2.3 About this machine
2
No. Name
1 Z Folding Unit
2 Saddle Staple Cartridge 1
3 Saddle Staple Cartridge 2
4 Folding Output Tray
5 Stopper
2-22 bizhub C658/C558/C458/C368/C308/C258
About this machine
2
2.3
Job Separator JS-602 (bizhub C658/C558/C458)
No. Name
1 Output Tray
bizhub C658/C558/C458/C368/C308/C258 2-23
2.3 About this machine
2
Post Inserter PI-507 (bizhub C658/C558/C458)
dReference
For details on how to use the Post Inserter Control Panel, refer to the User's Guide CD/DVD.
No. Name
1 Lower Tray
2 Upper Tray
3 Post Inserter Control Panel
2-24 bizhub C658/C558/C458/C368/C308/C258
About this machine
2
2.3
Finisher FS-533, Punch Kit PK-519 (bizhub C558/C458/C368/C308/C258)
No. Name
1 Punch Kit
2 Staple Cartridge
3 Output Tray
4 Tray Extension
bizhub C658/C558/C458/C368/C308/C258 2-25
2.3 About this machine
2
Job Separator JS-506 (bizhub C558/C458/C368/C308/C258)
No. Name
1 Output Tray
2-26 bizhub C658/C558/C458/C368/C308/C258
About this machine
2
2.3
Finisher FS-536, Finisher FS-536 SD, Finisher FS-534, Finisher FS-534 SD,
Punch Kit PK-520
No. Name
1 Output Tray
2 Staple Cartridge
3 Punch Scrap Box
4 Saddle Stitcher
bizhub C658/C558/C458/C368/C308/C258 2-27
2.3 About this machine
2
No. Name
1 Punch Kit
3 Saddle Staple Cartridge 1
3 Saddle Staple Cartridge 2
4 Folding Output Tray
2-28 bizhub C658/C558/C458/C368/C308/C258
About this machine
2
2.3
Large Capacity Unit LU-302/LU-207 (bizhub C658/C558/C458)
bizhub C658/C558/C458/C368/C308/C258 2-29
2.4 Power supply
2
2.4 Power supply
This machine provides two power switches: Power key on the Control Panel and Main Power Switch on
the machine. Under normal conditions, operate the Power key of the Control Panel. Use Main Power
Switch to restart this machine.
2.4.1 Turning the power on and off
Turn the power on and off only when necessary, for example, when the administrative settings are changed
or a power failure occurs.
1 Open the Lower Front Door or Front Door, and press n on the
Main Power Switch.
2 Press o on the Main Power Switch.
NOTICE
To restart this machine, turn the Main Power Switch off and on again after 10 or more seconds have passed.
2-30 bizhub C658/C558/C458/C368/C308/C258
Power supply
2
2.4
2.4.2 Operating the Power key
To immediately shift to the power save mode, for example, when work is finished or when not operating this
machine for a long period of time, press the Power key.
The machine shifts to different power save modes depending on how long the Power key is pressed.
Pressing the Power key briefly during operation shifts to the low power or sleep mode. Holding down the
Power key shifts to the Sub Power OFF mode.
To return this machine from the power save mode to the normal mode, press the Power key again.
In the low power or sleep mode, you can return this machine from the power save mode to the normal mode
simply by placing your hand close to the Control Panel.
Tips
- When the optional Image Controller is installed, the machine cannot shift to the Sub Power OFF mode.
Status of this machine Description
Power Save
mode
Low Power or
Sleep mode
Flashes blue.
This machine returns to the normal mode when data or faxes are re-
ceived.
Sub Power
OFF mode
Lights up orange.
This machine can receive data or faxes, but cannot scan or print an
original. If data or faxes are received when the machine is in the Sub
Power OFF mode, they are printed when the machine returns to the
normal mode.
Normal mode During opera-
tion
Lights up blue.
bizhub C658/C558/C458/C368/C308/C258 2-31
2.4 Power supply
2
2.4.3 Power save function
If the specified time elapses after the machine becomes inactive, the machine automatically shifts to the pow-
er save mode; for example, the Touch Panel display is turned off. The Power key flashes blue in the power
save mode. The power save mode returns to the normal mode by pressing any key on the Control Panel for
instance.
There are two power save modes: the low power mode and the sleep mode. Sleep mode provides a greater
power saving effect than Low Power mode. However, the time required to return to Normal mode is longer
than the time required to revert to Low Power mode.
dReference
The time required to shift to each mode can be changed in the Administrator Settings. For details, refer to the
User's Guide CD/DVD.
Reducing power consumption
To reduce power consumption in the standby state, change [Power Key Setting] to [Sub Power OFF].
Tap [Utility], and select [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] -
[Power Key Setting].
For information on the default administrator password, refer to User’s Guide CD/DVD.
After the setting is changed, the power save mode shifts as shown below depending on how the Power key
is pressed.
- Pressing the Power key
- This machine shifts to the Sub Power OFF mode.
- In the Sub Power OFF mode, the machine can receive data or faxes, but cannot scan or print an original.
- If data or faxes are received when the machine is in the Sub Power OFF mode, they are printed when
the machine returns to the normal mode.
- Holding down the Power key
- This machine shifts to the ErP Auto Power OFF mode.
- In the ErP Auto Power OFF mode, this machine cannot receive data or faxes and also cannot scan or
print an original.
- This function provides a greater power saving effect than the Sub Power OFF mode, which is close to
the state where the main power is turned off.
To enable the machine to return to the normal mode from the Sub Power OFF or ErP Auto Power OFF mode,
press the Power key again.
Tips
- When the optional Image Controller is installed, [Power Key Setting] is not displayed.
dReference
For details, refer to the User's Guide CD/DVD.
2
1
2-32 bizhub C658/C558/C458/C368/C308/C258
Control Panel
2
2.5
2.5 Control Panel
The optional Keypad KP-101 is equipped on the right side of the Control Panel.
2.5.1 Name of parts
No. Name Description
1 Touch Panel Various screens and messages are displayed. Directly touch the
Touch Panel to configure each setting.
2 Mobile touch area Used to associate this machine with an NFC-compatible Android
terminal.
You can place an Android terminal with PageScope Mobile for An-
droid installed on the mobile touch area to register this machine or
to perform user authentication.
This area is also used to associate this machine with an iOS terminal
that supports Bluetooth LE. The optional Local Interface Kit
EK-609 is required to use the Bluetooth LE function.
Bringing the iOS terminal closer to this machine allows you to reg-
ister this machine or perform user authentication with an operation
from PageScope Mobile for iPhone/iPad.
For details, refer to the User's Guide CD/DVD.
3 Access If user authentication or account track is enabled, enter the user
name and password for user authentication or the account name
and password for account track, then press this key to start the use
of this machine. After a target operation is completed, press this key
once again to end the use of this machine.
4 Menu Press this key to display the main menu.
5 Reset Press this key to reset all settings, excluding the registered ones,
that you entered using the Control Panel.
6 Stop Press this key to temporarily stop an active copy, scan, or print job.
7 Start Press to start the copy, scan or fax operation.
bizhub C658/C558/C458/C368/C308/C258 2-33
2.5 Control Panel
2
Equipped with the optional Keypad KP-101
8 1 - 4 Press each key to switch the display of the Touch Panel to a func-
tion assigned to a Register key.
1 ([Enlarge Display]): Enters Enlarge Display mode.
2 ([Guidance]): Press this key to display the Help Menu. You can
display descriptions of the functions and operating procedures
on the screen.
3 ([10 Keypad]): Displays the Keypad on the Touch Panel.
4 ([Preview]): Press this key to display a finishing image with the
current settings on the Touch Panel. This function can also
print a single proof copy to be checked before printing a large
number of copies.
These keys can be assigned to any function in the Administrator
Settings to be easy to use.
9 Power Press this key to switch to the power save mode.
In the normal mode, the key lights up blue. In the power save mode,
the key blinks blue or lights up orange.
To create a higher power saving effect, you can change the setting
in [Power Key Setting] of Administrator Settings. For [Power Key
Setting], refer to page 2-31.
10 Warning Indicator Flashes orange if a warning occurs.
Lights up orange if this machine has stopped due to an error.
No. Name Description
1 Keypad Use this Keypad to enter numeric values such as the number of
copies, zoom ratio, and fax number.
2 C (Clear) Press this key to cancel numeric values such as the number of cop-
ies, zoom ratio, and size you entered using the Keypad.
No. Name Description
2
1
2-34 bizhub C658/C558/C458/C368/C308/C258
Touch Panel
2
2.6
2.6 Touch Panel
2.6.1 Main menu
Press the Menu key on the Control Panel to display the main menu. In the main menu, you can configure
settings such as frequently used functions or a shortcut key for jumping to each mode.
Layout of main menu
No. Name Description
1 [Accessibility] Tap this button to adjust a Touch Panel pressing position, change
keying sounds, and configure the operating environment of the
Control Panel.
[Counter] Tap this button to display the total number of pages printed on this
machine on a function or color basis.
User/Account Name This area displays the name of the current login user or the account
track name when User Authentication or Account Track is enabled.
When User Authentication and Account Track are used together,
the user name is displayed.
[Language] Tap this button to temporarily change the language to be displayed
on the panel. For details on how to display [Language], refer to the
User's Guide CD/DVD.
[Function Search] Tap this button to search for copy settings or fax/scan settings to
go to the target function screen from the search result.
[Job List] Tap this button to display current or standby jobs. If necessary, you
can check job logs or print a communication report. This list dis-
plays the operation status of the current job when it is running. For
details, refer to page 2-41.
2 Page Indicator Allows you to check which page is currently displayed when main
menu keys are assigned to multiple pages.
3 Main menu keys Display shortcut keys assigned to any function.
By default, the main menu shows [Copy], [Scan/Fax], [User Box],
[Sound Setting], [Address book], and [Utility].
In some regions, [Quick Security] is displayed on the main menu
by default.
[Utility] Tap this button to configure settings of this machine or view the use
status of this machine.
[Utility] is always displayed.
4 Page switching key Tap this key to switch pages when main menu keys are assigned to
multiple pages.
1
3
2
4
bizhub C658/C558/C458/C368/C308/C258 2-35
2.6 Touch Panel
2
Customizing the main menu
The main menu can be extended to three screens as necessary. Up to 25 keys can be assigned to three main
menu screens which can be switched.
In addition, you can specify your favorite background pattern. If necessary, you can add a background pat-
tern by registering an image on this machine.
dReference
For details, refer to the User's Guide CD/DVD.
2.6.2 Slide menu
Tapping a tab key on the Touch Panel slides open the menu. The setting of the slide menu can be changed
to suit your environment.
No. Name Description
1 Tab key Tap this key to open and close the slide menu.
Slide menu key Display function keys assigned to any function.
By default, the main menu shows [Copy], [Scan/Fax], [User Box],
and [Interrupt].
1
2-36 bizhub C658/C558/C458/C368/C308/C258
Touch Panel
2
2.6
Customizing the slide menu
Up to five slide menus can be set.
You can configure the setting to prevent the slide menu. Also, you can display the Keypad or change the
background color.
dReference
For details, refer to the User's Guide CD/DVD.
2.6.3 Operating the Touch Panel
The Touch Panel of this machine supports user-friendly operations, such as, sliding a finger on the Touch
Panel.
Tap
Lightly touch the screen with your finger, then remove your finger
from the screen immediately. This action can select or determine a
menu.
Double-tap
Lightly touch the screen with your finger twice in succession. Used
to retrieve detailed information, to enlarge a thumbnail or preview
image, and to open a User Box.
Flick
Make a slight fillip while sliding your finger on the screen. Used to
scroll the destination/job list or to feed a page in the Main menu
screen/Preview screen.
bizhub C658/C558/C458/C368/C308/C258 2-37
2.6 Touch Panel
2
Drag
To move the scroll bar or document, place your finger on it and
move your finger. Used to move the scroll bar or document.
Pan
Slide your finger parallel in a front-to-back and side-to-side direc-
tion on the screen. Used to move to the intended display location if
data spans multiple screens.
Long-tap
Hold down the document by the finger. Used to display the icon re-
lated to the document.
Drag & Drop
Slide your finger to the intended place and release it while a doc-
ument is selected. Used to move the document to the intended
place.
2-38 bizhub C658/C558/C458/C368/C308/C258
Touch Panel
2
2.6
Pinch in/Pinch out
Place two fingers on the screen and then open or close them. Used
to enlarge or reduce a preview image.
Rotation
Place two fingers on the screen and then rotate them. Used to rotate
a preview image.
Precautions on using the Touch Panel
This machine features a capacitance-base touch panel. Note the following points when operating the Touch
Panel.
- Use your finger or the Stylus Pen supplied with this machine. Note that the Touch Panel will not re-
spond appropriately if you operate it using your nail or a pen tip instead of your finger or the Stylus Pen.
- Applying a strong force to the Touch Panel will damage the Touch Panel, and potentially cause a
breakage.
- When operating in the Touch Panel, do not press on it using excessive force or with a pointed object
such as a mechanical pencil.
- The Touch Panel may not respond appropriately, if operated with a wet finger.
- The Touch Panel will not respond appropriately, if operated with hands with gloves on. It is recom-
mended that you use the Stylus Pen supplied with this machine or your finger.
- The Touch Panel may not respond appropriately, if the distance between you and a fluorescent lamp
is 19-11/16 inches (500 mm) or less while you are operating the Touch Panel.
- Avoid using the Touch Panel at a site near a device that generates electric noise (such as a generator
and an air conditioner). The electric noise may cause the Touch Panel to operate erratically.
bizhub C658/C558/C458/C368/C308/C258 2-39
2.6 Touch Panel
2
2.6.4 How to display the Keypad
When tapping the input area on the copy screen and etc. for entering the number of copies or entering ad-
justment values, the Keypad will be displayed.
It can also be displayed by pressing the 10 Keypad key (default: Register key 3).
How to move the Keypad
Move your finger while the upper side of Keypad is being pressed.
How to close the Keypad
After entering, tap [Close] to close the Keypad.
It can also be closed by pressing the 10 Keypad key (default: Reg-
ister key 3).
Input area for entering the number of copies
Input area for entering values
2-40 bizhub C658/C558/C458/C368/C308/C258
Touch Panel
2
2.6
To display the Keypad all the time
The Keypad can always be displayed to enable entry of the number of copies on the copy screen, User Box
print setting screen, or browser print setting screen.
dReference
For details, refer to the User's Guide CD/DVD.
2.6.5 Entering characters
When entering characters to register an address or program, use the keyboard screen displayed on the
Touch Panel.
When typing in "Group1":
1 To type in uppercase letters or symbols, tap the [Shift] key.
% If you mistyped, tap [ ] or [ ] to move the cursor to the character you want to clear, then tap the
[Delete] key.
% Tap the [Shift] key again to return to the original keyboard screen.
2 After typing completes, tap [OK].
1
2
bizhub C658/C558/C458/C368/C308/C258 2-41
2.7 Jobs
2
2.7 Jobs
2.7.1 Job screen
A job refers to an operation such as printing, sending, receiving, or saving.
When you tap [Job List] in the main menu or the main screen of each mode, the Job screen appears.
In the Job screen, you can view a list or history of a job currently being executed or print a sending-receiving
result report.
In general, jobs are executed starting from the job at the top of the list of currently active jobs. If you are in a
hurry to execute any particular jobs, you can rearrange the job execution order.
dReference
For details, refer to the User's Guide CD/DVD.
2.7.2 Multi-job function
While a job is active, you can register another job. Up to 259 jobs can be registered in total.
The table below shows the maximum number of jobs that can be registered for each function.
These values may vary depending on conditions.
No. Description
1 Displays jobs.
2 Select a job type. In [Comm. List], you can also print a sending-receiving result report.
3 Tap this button to narrow down the jobs to be displayed.
4 Tap this button to delete a job.
5 Tap this button to select a job to be executed preferentially.
6 Tap this button to view details of a selected job.
3
12
4
5
6
Function Minimum number of jobs Maximum number of jobs
Copy 6 62
Print 11 67
Fax memory TX + Scan 55 111
Fax RX 100 156
Sharing 56 -
2-42 bizhub C658/C558/C458/C368/C308/C258
Loading paper
2
2.8
2.8 Loading paper
2.8.1 Loading paper in Tray 1 to Tray 4
Up to 500 sheets of plain paper can be loaded into each tray. Tray3 and Tray4 are optional.
Applicable paper types
Plain paper, single-side-only paper, thin paper, special paper, thick paper, letterhead, colored paper, and re-
cycled paper
Applicable paper sizes
Tray1
Tray2
Tray3 to Tray4
How to load paper
1 Pull out the tray.
NOTICE
Be careful not to touch the Film.
Type Size
Standard-size paper 11 e 17 w to 8-1/2 e 11 w/v, A3 w to A5 w, B4 w, B5 w/v, 8 e 13 w,
16K v, 8K w
Custom-size paper Width: 5-1/2 to 11-11/16 inches (139.7 mm to 297 mm)
Length: 7-3/16 to 17 inches (182 mm to 431.8 mm)
Type Size
Standard-size paper 12-1/4 e 18 w to 8-1/2 e 11 w/v, SRA3 w, A3 w to A5 w, B4 w,
B5 w/v, 8 e 13 w, 16K v, 8K w
Custom-size paper Width: 5-1/2 to 12-5/8 inches (139.7 mm to 320 mm)
Length: 7-3/16 to 18 inches (182 mm to 457.2 mm)
Type Size
Standard-size paper 11 e 17 w to 8-1/2 e 11 w/v, A3 w to A5 w, B4 w, B5 w/v, 8 e 13 w,
16K v, 8K w
bizhub C658/C558/C458/C368/C308/C258 2-43
2.8 Loading paper
2
2 Slide the Lateral Guide to fit the size of the paper to be loaded.
3 Load paper into the tray.
% Load paper into the tray with the print side facing up.
4 Close the Tray.
When you change the paper type or change to custom size paper, proceed to step 5 to change the
setting on this machine.
When you do not change the paper type or change to custom size paper when adding paper, you can
use the current setting without making any changes.
5 Change the paper type and paper size settings.
% When loading paper other than plain paper, change the paper type setting.
% When loading custom sized paper, change the paper type setting.
% For details, refer to the User's Guide CD/DVD.
2-44 bizhub C658/C558/C458/C368/C308/C258
Loading paper
2
2.8
2.8.2 LCT (built-in)
Up to 2500 sheets of plain paper can be loaded into the LCT (built-in). The LCT (built-in) is an option.
Applicable paper types
Plain paper, single-side-only paper, thin paper, special paper, thick paper, letterhead, colored paper, and re-
cycled paper
Applicable paper sizes
How to load paper
1 Pull out the tray.
NOTICE
Be careful not to touch the Film.
2 Load paper into the right tray.
% Load paper into the tray with the print side facing up.
NOTICE
Do not load the tray with paper of a size other than that previ-
ously specified. To change the paper size, contact your service
representative.
3 Load paper into the left tray.
% Load paper into the tray with the print side facing up.
Type Size
Standard-size paper 8-1/2 e 11 v, A4 v
bizhub C658/C558/C458/C368/C308/C258 2-45
2.8 Loading paper
2
4 Close the Tray.
When you change the paper type, proceed to step 5 to change the setting on this machine.
When you do not change the paper type when adding paper, you can use the current setting without
making any changes.
5 Change the paper type setting.
% When loading paper other than plain paper, change the paper type setting. For details, refer to the
User's Guide CD/DVD.
2.8.3 Loading paper into the Large Capacity Unit
Up to 3000 sheets of plain paper can be loaded into Large Capacity Unit LU-302, and up to 2500 sheets of
plain paper into Large Capacity Unit LU-207.
The Large Capacity Unit is an option.
Applicable paper types
Plain paper, single-side-only paper, thin paper, special paper, thick paper, letterhead, colored paper, recy-
cled paper
Applicable paper sizes
Large Capacity Unit LU-302
Large Capacity Unit LU-207
How to load paper
1 Open the Upper Door.
NOTICE
Exercise care not to touch the surface of the Paper Feed Roll-
er with your hand.
Type Size
Standard-size paper 8-1/2 e 11 v, A4 v
Type Size
Standard-size paper 12 e 18 w, 11 e 17 w to 8-1/2 e 11 w/v, SRA3 w, A3 w, B4 w, A4 w/v
2-46 bizhub C658/C558/C458/C368/C308/C258
Loading paper
2
2.8
2 Lift the Paper Feed Roller, and load paper into the unit.
% Load paper into the tray with the print side facing down.
NOTICE
Do not load custom sized paper into the Large Capacity Unit.
When changing the paper size, contact your service represent-
ative.
3 Close the Upper Door.
When you change the paper type, proceed to step 4 to change the setting on this machine.
When you do not change the paper type when adding paper, you can use the current setting without
making any changes.
4 Change the paper type setting.
% When loading paper other than plain paper, change the paper type setting. For details, refer to the
User's Guide CD/DVD.
2.8.4 Bypass Tray
Use the Bypass Tray when printing on a paper size other than for paper trays, or printing on envelopes or
transparencies.
To use the Bypass Tray, load paper and specify the paper type.
Applicable paper types
Plain paper, single-side-only paper, special paper, thick paper, postcard (4 e 6 (A6 Card)), transparency, let-
terhead, colored paper, envelope, label sheets, index paper, recycled paper, and banner paper
Applicable paper sizes
Type Size
Standard-size paper 12 e 18 w to 5-1/2 e 8-1/2 w/v, 4 e 6 w, SRA3 w, A3 w to A6 w, B4 w to
B6 w, A6 card w, 8 e 13 w, 16K w/v, 8K w, banner paper, envelope (B5
w (6-15/16 inches e 9-13/16 inches (176 mm e 250 mm)), C4 w (9 inches
e 12-3/4 inches (229 mm e 324 mm)), C5 w (6-3/8 inches e 9 inches (162
mm e 229 mm)), C6 w (6-3/8 inches e 4-1/2 inches (162 mm e 114 mm)),
DL w (8-11/16 inches e 4-5/16 inches (220 mm e 110 mm)), Com10 (4-1/8
inches e 9-1/2 inches (104.7 mm e 241.3 mm)), Monarch (3-7/8 inches e
7-1/2 inches (98.4 mm e 190.5 mm)))
Custom-size paper Paper width: 3-9/16 inches to 12-5/8 inches (90 mm to 320 mm)
Paper length: 5-1/2 inches to 47-1/4 inches (139.7 mm to 1,200 mm)
bizhub C658/C558/C458/C368/C308/C258 2-47
2.8 Loading paper
2
Paper not available
Do not load the following paper into the Bypass Tray. Doing so may cause a paper jam or damage to the
machine.
- Folded, torn or creased paper, or bundles of sheets of different sizes
How to load paper
1 Open the Bypass Tray.
% To load large-sized paper, pull out the Tray Extension.
% To load banner paper, install the optional Mount Kit
MK-730.
NOTICE
Exercise care not to touch the surface of the Paper Feed Roll-
er with your hands.
2 Load paper with the print side facing down, then align the Lat-
eral Guide to the paper.
% Insert paper into the tray until their edges are pressed
against the back.
NOTICE
Do not load an excessive number of sheets such that the top
of the stack is higher than the
,
mark.
If paper is curled, flatten it before loading it.
When you change the paper type or change to custom size
paper, proceed to step 3 to change the setting on this ma-
chine.
When you do not change the paper type or change to custom
size paper when adding paper, you can use the current setting without making any changes.
3 Change the paper type and paper size settings.
% When loading paper other than plain paper, change the paper type setting.
% When loading custom sized paper, change the paper type setting.
% For details, refer to the User's Guide CD/DVD.
2-48 bizhub C658/C558/C458/C368/C308/C258
Loading paper
2
2.8
Loading postcards
Up to 20 postcards can be loaded into the tray.
1 Load postcards in the w direction as shown in the figure with the print side facing down, then align the
Lateral Guide to the paper.
% Insert postcards into the tray until their edges are pressed against the back.
NOTICE
When loading postcards into the Bypass Tray, note the following points.
% When loading curled postcards, uncurl the postcards as shown in the figure in advance.
% Do not put spare postcards in the Bypass Tray. Doing so
causes a size detection error.
The screen for selecting the paper type and paper size appears.
max. 20 sheets
bizhub C658/C558/C458/C368/C308/C258 2-49
2.8 Loading paper
2
2 Change the paper size setting.
% In [Paper Size] - [Envelope/4 e 6] ([Envelope/A6 Card]), select [4 e 6] ([A6 Card]). Selecting [4 e 6]
([A6 Card]) sets [Paper Type] to [Thick3].
Loading transparencies
Up to 20 transparencies can be loaded into the tray.
1 Load transparencies in the v direction as shown in the figure
with the print side facing down, then align the Lateral Guide
to the paper.
% Insert transparencies into the tray until their edges are
pressed against the back.
The screen for selecting the paper type and paper size ap-
pears.
2 Change the paper type setting.
% Select [Transparency] from [Paper Type].
% Transparencies can only be printed in black. When the color function is other than black and [Trans-
parency] is selected, check the displayed message, and tap [Yes].
2-50 bizhub C658/C558/C458/C368/C308/C258
Loading paper
2
2.8
Loading envelopes
Up to 10 envelopes can be loaded into the tray.
Image of a long envelope
Image of a Western-style envelope
1 Load envelopes as shown in the figure with the flap part facing up, then align the Lateral Guide to them.
% Insert envelopes into the tray until their edges are pressed against the back.
% The flap side of envelopes cannot be printed on.
NOTICE
When loading envelopes into the Bypass Tray, note the following points.
% When loading envelopes, remove air from them, and securely press along the flap fold line. Other-
wise, it will result in an envelope wrinkle or paper jam.
% Do not use envelopes that have glue or release paper on the flaps or the part covered by the flap
on the body. Otherwise, the machine may be damaged or a failure may occur.
max. 10 sheets
bizhub C658/C558/C458/C368/C308/C258 2-51
2.8 Loading paper
2
% Do not put spare envelopes in the Bypass Tray. Doing so
causes a size detection error.
The screen for selecting the paper type and paper size appears.
2 Tap [Envelope/4 e 6]/[Envelope/A6 Card] from [Paper Size].
3 Select the envelope size from [Envelope/4 e 6] ([Envelope/A6 Card]).
% Various sizes of envelopes are available. Specify the correct paper size for the envelopes you have
loaded. When the envelope size is specified, [Paper Type] is automatically set to [Envelope].
NOTICE
When loading envelopes with flaps opened, also select the standard size that matches them. You do not
have to measure the size of the envelope with the flap opened to set the size as a custom-sized enve-
lope.
2-52 bizhub C658/C558/C458/C368/C308/C258
Loading paper
2
2.8
Loading label sheets
Up to 20 label sheets can be loaded into the tray.
1 Load label sheets in the w direction as shown in the figure with
the print side facing down, then align the Lateral Guide to the
paper.
% Insert label sheets into the tray until their edges are
pressed against the back.
The screen for selecting the paper type and paper size ap-
pears.
2 Change the paper type setting.
% Select [Thick 1+] from [Paper Type].
bizhub C658/C558/C458/C368/C308/C258 2-53
2.8 Loading paper
2
Loading index papers
Up to 20 index papers can be loaded into the tray.
1 Put the tab side in the direction opposite to this machine with
the print side facing down, then align the Lateral Guide to the
paper.
% Insert index papers into the tray until their edges are
pressed against the back.
The screen for selecting the paper type and paper size ap-
pears.
2 Change the paper type setting.
% Select [Index Paper] from [Paper Type].
2-54 bizhub C658/C558/C458/C368/C308/C258
Loading paper
2
2.8
3
Basic Settings and
Operations
bizhub C658/C558/C458/C368/C308/C258 3-3
3.1 Print function
3
3 Basic Settings and Operations
3.1 Print function
3.1.1 Required settings and basic operations (for Windows OS)
Print data created on your computer via the network.
This section describes how to configure standard print settings using the installer.
Preparation flow
The following describes a preparation flow to print data. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1 Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the network cable. For details, refer to page 3-4.
2 Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-4.
The network can be used with the default settings unless otherwise requested.
3 Installing the printer driver
% Install the printer driver on the computer. For details, refer to page 3-5.
Operation flow
The following describes a flow to print data from your computer. For details, refer to page 3-5.
1 Opening original data
% Open the data you want to print using the application software.
2 Configuring the printer driver for printing
% Select a printer driver, and change the setting if necessary before printing.
3-4 bizhub C658/C558/C458/C368/C308/C258
Print function
3
3.1
Checking the cable connection
Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.
Checking network settings of this machine
Tap [Utility], and select [Device Information]. Check that the IP address is displayed.
Tips
- In general, the default settings are available for network connection; however, some network environ-
ments require a change on network settings.
- If no IP address is displayed, you need to configure the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide CD/DVD.
- For information on the default administrator password, refer to User’s Guide CD/DVD.
bizhub C658/C558/C458/C368/C308/C258 3-5
3.1 Print function
3
Installing the printer driver
Use the installer to install the printer driver.
0 This operation requires administrator privileges for your computer.
1 Insert the printer driver CD/DVD-ROM into the CD/DVD-ROM
drive of the computer.
2 Select [Agree the Software End User License Agreement.] and [Install printers/MFPs], and click [Next].
3 Select this machine from the list of detected printers.
% If multiple identical models are displayed, check the IP address to select an appropriate one. For
details on how to check the IP address of this machine, refer to page 3-4.
4 As needed, select [Specify manually.], specify the type of the printer driver you want to install.
5 Click [Next].
6 Click [Install].
7 Click [Finish].
Printing data
1 Open the data you want to print using the application software.
2 In the [File] menu, click [Print].
3 Select the installed printer driver, and click [Print].
Tips
- Clicking [Preferences] can change the setting of the printer driver as required.
- If user authentication is enabled in this machine, specify the required data such as the user name and
password.
3-6 bizhub C658/C558/C458/C368/C308/C258
Print function
3
3.1
Types of printer drivers
Select a printer driver that will meet your printing requirements.
3.1.2 Required settings and basic operations (for Mac OS)
Print data created on your computer via the network.
This section describes how to configure a printer driver, for the Mac OS 10.9 environment, Bonjour connec-
tion, and use of metric-size paper as major conditions.
Preparation flow
The following describes a preparation flow to print data. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1 Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the network cable. For details, refer to page 3-7.
2 Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-7.
The network can be used with the default settings unless otherwise requested.
3 Installing the printer driver
% Install the printer driver on the computer. For details, refer to page 3-10.
4 Adding and configuring a printer driver
% Set up your computer so that data can be printed using the installed printer driver. For details, refer
to page 3-10.
Driver type Description
PCL This is a standard driver for printing general office documents. Among the three
drivers, this driver provides the fastest printing speed.
PS This driver is effective to exactly print data that is created using PostScript-com-
patible application software from Adobe or other vendors. This driver is often used
in graphics and light printing applications where good color reproducibility is im-
portant.
bizhub C658/C558/C458/C368/C308/C258 3-7
3.1 Print function
3
Operation flow
The following describes a flow to print data from your computer. For details, refer to page 3-11.
1 Opening original data
% Open the data you want to print using the application software.
2 Configuring the printer driver for printing
% Select a printer driver, and change the setting if necessary before printing.
Checking the cable connection
Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.
Checking network settings of this machine
1 Tap [Utility], and select [Device Information]. Check that the IP address is displayed.
3-8 bizhub C658/C558/C458/C368/C308/C258
Print function
3
3.1
2 Specify the Bonjour name. Tap [Utility], and select [Administrator Settings] - [Network Settings] - [Bon-
jour Setting] - [ON].
% For information on the default administrator password, refer to User’s Guide CD/DVD.
% The Bonjour name is displayed on the printer driver as a connected device name.
1
2
3
bizhub C658/C558/C458/C368/C308/C258 3-9
3.1 Print function
3
% To change the Bonjour name, tap [Bonjour Name], and enter the name using the displayed key-
board.
Tips
- If no IP address is displayed in Step 1, you need to set up the network. Tap [Utility], and select [Admin-
istrator Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your
environment. For details, refer to the User's Guide CD/DVD.
- For information on the default administrator password, refer to User’s Guide CD/DVD.
3-10 bizhub C658/C558/C458/C368/C308/C258
Print function
3
3.1
Installing the printer driver
Use the installer to install the printer driver.
0 This operation requires administrator privileges for your computer.
1 Insert the printer driver CD/DVD-ROM into the CD/DVD-ROM
drive of the computer.
2 Select the target printer driver, and copy it to the desktop.
Example: /Driver/OS_10_9_x/Letter/XXX_109.pkg (Printer
driver for Mac OS 10.9 or later)
% "XXX" indicates the model name.
% When ordinarily using metric-sized paper, select a printer
driver in the "A4" directory.
% The last three digits of the printer driver name indicate the
version of the operating system.
3 Double-click the file copied onto the desktop.
4 Proceed with the procedure according to the on-screen instructions until the installation screen ap-
pears.
5 Click [Install].
6 When a prompt message appears to ask you to enter the name and password, type in the name and
password of the user with administrator privileges.
7 Click [Close].
Adding and configuring a printer driver
Set up your computer so that data can be printed using the installed printer driver.
0 This operation requires administrator privileges for your computer.
1 In the Apple Menu, click [System Preferences] - [Printers & Scanners].
2 Click [+].
3 Select a printer from the displayed list of printers.
% If you cannot identify the connected machine because the same product name is listed multiple
times, check with the administrator.
% If the target printer name is not displayed, select [Add Other Printer or Scanner] or [Add Printer or
Scanner] to set up the printer. For details, refer to the User's Guide CD/DVD.
4 Select the installed optional units.
bizhub C658/C558/C458/C368/C308/C258 3-11
3.1 Print function
3
Printing data
1 Open the data you want to print using the application software.
2 From the [File] menu, select [Print].
3 Select the Bonjour name of this machine.
Tips
- If necessary, you can click [Show Details] to change the settings of the printer driver.
3-12 bizhub C658/C558/C458/C368/C308/C258
Scan-to-Send function
3
3.2
3.2 Scan-to-Send function
3.2.1 Various transmission methods
The original data scanned by this machine can be sent and saved using a variety of methods.
Sending data to your computer (SMB Send)
Send scanned data to a computer on the network. Once settings are configured, you can send data easily.
For details, refer to page 3-14 and page 3-22.
Transmitting data as E-mail attachment (E-mail TX)
Send scanned data as an E-mail attachment. This function is useful when you want to forward data to an
outside location. For details, refer to page 3-31.
Saving data to the USB memory device (External memory)
Directly save scanned data on the USB memory device connected to this machine. For details, refer to
page 3-67.
bizhub C658/C558/C458/C368/C308/C258 3-13
3.2 Scan-to-Send function
3
Various methods for transmitting and saving data
In addition to the above, data can be sent and saved in various methods. Select the appropriate one to meet
your needs.
- Issuing a scan instruction from a computer (Web service function)
- Saving data to a User Box on the HDD (Save in User Box)
- Sending to an FTP server (FTP TX)
- Sending to a WebDAV server (WebDAV Send)
dReference
For details, refer to the User's Guide CD/DVD.
3-14 bizhub C658/C558/C458/C368/C308/C258
Scan-to-Send function
3
3.2
3.2.2 Sending data to your Windows computer (SMB Send)
Send scanned data to a computer on the network.
Once settings are configured, you can send data easily.
Preparation flow
The following describes a preparation flow for sending scanned data. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1 Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the network cable. For details, refer to page 3-15.
2 Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-15.
The network can be used with the default settings unless otherwise requested.
3 Checking computer information
% Check the information required for Store Address, and fill out the checklist. For details, refer to
page 3-16.
4 Configuring your computer
% Configure settings to share a computer, or create a dedicated folder to receive files. For details, refer
to page 3-17.
5 Registering destinations
% Register destinations to which files are sent while checking the checklist. For details, refer to
page 3-17.
bizhub C658/C558/C458/C368/C308/C258 3-15
3.2 Scan-to-Send function
3
Operation flow
The following describes a transmission flow. For details, refer to page 3-20.
1 Loading the original
2 Selecting a destination
% Select a registered destination, and check the settings such as the file type and image quality.
3 Press the Start key.
% Press the Start key to scan the original.
Checking the cable connection
Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.
Checking network settings of this machine
Tap [Utility], and select [Device Information]. Then, check that the IP address is displayed.
Tips
- In general, the default settings are available for network connection; however, some network environ-
ments require a change on network settings.
- If no IP address is displayed, you need to configure the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide CD/DVD.
3-16 bizhub C658/C558/C458/C368/C308/C258
Scan-to-Send function
3
3.2
- For information on the default administrator password, refer to User’s Guide CD/DVD.
Checklist
While making notes in the checklist shown below, check computer information and configure settings for
preparation. The completed checklist is used for Store Address.
Checking computer information
Check the host address and user ID, and write them down.
1 Display the Properties window of the computer.
% In Windows 8.1/10, while pressing the [Windows] ( ) key, press the [X] key, and then select [System
properties] in the displayed menu.
% In Windows 7, from the Start menu, select [Computer] - [System properties].
2 Check the computer name, and write it down in the Host address column of the checklist.
3 Open the command prompt.
% In Windows 8.1/10, while pressing the [Windows] ( ) key, press the [X] key, and then select [Com-
mand Prompt] in the displayed menu.
% In Windows 7, from the Start menu, select [All Programs] - [Accessories] - [Command Prompt].
4 Check the user name, and write it down in the User ID column of the checklist.
Name Entry column Detail
Host Address Host name or IP address to which the scanned data is sent page 3-16
File Path Name of the dedicated folder to receive the scanned data page 3-17
User ID User name required to log in to the computer page 3-16
Password Password required to log in to the computer
You should not enter this column for security reasons.
Contact your sys-
tem administra-
tor.
bizhub C658/C558/C458/C368/C308/C258 3-17
3.2 Scan-to-Send function
3
Configuring your computer
Create a new folder, and enable the sharing settings.
0 This operation requires administrator privileges for your computer.
1 Display the Network and Sharing Center window to configure a sharing setting.
% In Windows 8.1/10, while pressing the [Windows] ( ) key, press the [X] key, and select [Control
Panel] - [Network and Sharing Center] - [Change advanced sharing settings] in the displayed menu,
then select the [Turn on file and printer sharing] check box.
% In Windows 7, from the Start menu, select [Control Panel] - [Network and Internet] - [Network and
Sharing Center] - [Change advanced sharing settings] then select the [Turn on file and printer shar-
ing] check box.
2 Create a new folder, and write down the folder name in the File path column of the checklist.
3 Configure the setting to share the folder created in Step 2. Right-click on the folder, then click [Proper-
ties].
4 Click the [Sharing] tab, then click [Advanced Sharing].
5 Select the [Share this folder] check box, then click [Permissions].
6 Select [Everyone] from the [Group or user names:] list, then select all of the [Allow] check boxes.
Registering destinations
While checking the created checklist, register the folder for receiving the scanned data as an address book
of this machine.
1 Tap [Utility], and select [One-Touch/User Box Registration] - [Create One-Touch Destination] - [Address
Book] - [PC (SMB)].
3-18 bizhub C658/C558/C458/C368/C308/C258
Scan-to-Send function
3
3.2
2 Tap [New].
3 For [Name], specify the name to be displayed on the assigned key.
% For [Sort Character], enter the same name as [Name].
% This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change
the setting, tap [Index].
4 While checking the checklist, enter the user ID and password you wrote down.
1
2
3
2
3
1
bizhub C658/C558/C458/C368/C308/C258 3-19
3.2 Scan-to-Send function
3
5 While checking the checklist, enter the host address and file path you wrote down.
6 Tap [Close].
3
1
2
3-20 bizhub C658/C558/C458/C368/C308/C258
Scan-to-Send function
3
3.2
Sending the original
1 Load the original.
2 Tap [Scan/Fax].
3 Select a destination.
1
2
bizhub C658/C558/C458/C368/C308/C258 3-21
3.2 Scan-to-Send function
3
4 Check the setting if necessary.
% Tap [Check Setting] to check the setting.
% You can also check the setting using the keys displayed on the Touch Panel.
% To change the setting, tap the desired key on the Touch Panel.
5 Press the Start key.
Settings Description
[Simplex/Duplex] Select whether to scan one or both sides of the original.
[Resolution] Specify the scanning resolution.
[Color] Select whether to scan the original in color or black and white mode.
[File Type] Select the type of the file to save scanned data.
[Scan Size] Specify the size of the original to be scanned.
[File Name/Subject
Name/Other]
Change the file name or the subject of an E-mail to be sent.
[Separate Scan] If all pages of the original cannot be loaded into the ADF at one time,
change the setting to ON. You can load the pages of the original in
several batches and handle them as one job. For details on using the
separate scan function, refer to the User's Guide CD/DVD.
3-22 bizhub C658/C558/C458/C368/C308/C258
Scan-to-Send function
3
3.2
3.2.3 Sending data to your Mac computer (SMB Send)
Send scanned data to a computer on the network.
Once settings are configured, you can send data easily.
Preparation flow
The following describes a preparation flow for sending scanned data. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1 Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the network cable. For details, refer to page 3-23.
2 Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-23.
3 Checking computer information
% Check the information required for Store Address, and fill out the checklist. For details, refer to
page 3-25.
4 Configuring your computer
% Configure settings to share a computer, or create a dedicated folder to receive files. For details, refer
to page 3-26.
5 Registering destinations
% Register destinations to which files are sent while checking the checklist. For details, refer to
page 3-26.
bizhub C658/C558/C458/C368/C308/C258 3-23
3.2 Scan-to-Send function
3
Operation flow
The following describes a transmission flow. For details, refer to page 3-29.
1 Loading the original
2 Selecting a destination
% Select a registered destination, and check the settings such as the file type and image quality.
3 Press the Start key.
% Press the Start key to scan the original.
Checking the cable connection
Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.
Checking network settings of this machine
Tap [Utility], and select [Device Information].
Check that the IP address is displayed.
Tips
- If no IP address is displayed, you need to configure the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide CD/DVD.
3-24 bizhub C658/C558/C458/C368/C308/C258
Scan-to-Send function
3
3.2
- For information on the default administrator password, refer to User’s Guide CD/DVD.
Configuring this machine
The following settings are required.
- Select [NTLM v1/v2] in [Utility] - [Administrator Settings] - [Network Settings] - [SMB Settings] - [Client
Settings], then tap [OK].
- Select [Utility] - [Administrator Settings] - [System Settings] - [Date/Time Settings] to specify the same
date/time and time zone between this machine and your computer, then tap [OK].
2
1
2
1
bizhub C658/C558/C458/C368/C308/C258 3-25
3.2 Scan-to-Send function
3
Checklist
While making notes in the checklist shown below, check computer information and configure settings for
preparation. The completed checklist is used for Store Address.
Checking computer information
Check the host address and user ID.
0 This operation requires administrator privileges for your computer.
% Check the IP address and user name, and write it down in the Host Address and User ID columns of
the checklist.
Name Entry column Detail
Host Address IP address to which the scanned data is sent page 3-25
File Path Name of the dedicated folder to receive the scanned data page 3-26
User ID User name required to log in to the computer page 3-25
Password Password required to log in to the computer
Entering the password here is not recommended for se-
curity reasons.
Contact your sys-
tem administra-
tor.
3-26 bizhub C658/C558/C458/C368/C308/C258
Scan-to-Send function
3
3.2
Configuring your computer
Create a new folder, and enable the sharing settings.
0 This operation requires administrator privileges for your computer.
1 Create a new folder, and write down the folder name in the File path column of the checklist.
2 Enable the folder sharing settings. In the Apple menu, select [System Preferences] - [Sharing].
3 Select the [File Sharing] check box, then click [Options...].
4 Select the [Share files and folders using SMB] and user name check boxes, then click [Done].
5 Under [Shared Folders:], click [+].
6 Select a new folder, then click [Add].
7 Click the new folder to check the access right.
If the access right is changed to [Read & Write], the setting is completed.
Registering destinations
While checking the created checklist, register the folder for receiving the scanned data as an address book
of this machine.
1 Tap [Utility], and select [One-Touch/User Box Registration] - [Create One-Touch Destination] - [Address
Book] - [PC (SMB)].
2 Tap [New].
bizhub C658/C558/C458/C368/C308/C258 3-27
3.2 Scan-to-Send function
3
3 For [Name], specify the name to be displayed on the assigned key.
% For [Sort Character], enter the same name as [Name].
% This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change
the setting, tap [Index].
4 While checking the checklist, enter the user ID and password you wrote down.
5 While checking the checklist, enter the host address and file path you wrote down.
1
2
3
1
3
2
1
2
3
3-28 bizhub C658/C558/C458/C368/C308/C258
Scan-to-Send function
3
3.2
6 Tap [Close].
bizhub C658/C558/C458/C368/C308/C258 3-29
3.2 Scan-to-Send function
3
Sending the original
1 Load the original.
2 Tap [Scan/Fax].
3 Select a destination.
1
2
3-30 bizhub C658/C558/C458/C368/C308/C258
Scan-to-Send function
3
3.2
4 Check the setting if necessary.
% Tap [Check Setting] to check the setting.
% You can also check the setting using the keys displayed on the Touch Panel.
% To change the setting, tap the desired key on the Touch Panel.
5 Press the Start key.
Settings Description
[Simplex/Duplex] Select whether to scan one or both sides of the original.
[Resolution] Specify the scanning resolution.
[Color] Select whether to scan the original in color or black and white mode.
[File Type] Select the type of the file to save scanned data.
[Scan Size] Specify the size of the original to be scanned.
[File Name/Subject
Name/Other]
Change the file name or the subject of an E-mail to be sent.
[Separate Scan] If all pages of the original cannot be loaded into the ADF at one time,
change the setting to ON. You can load the pages of the original in
several batches and handle them as one job. For details on using the
separate scan function, refer to the User's Guide CD/DVD.
bizhub C658/C558/C458/C368/C308/C258 3-31
3.2 Scan-to-Send function
3
3.2.4 Transmit the scanned data via E-mail (E-mail TX)
Send scanned data as an E-mail attachment.
This function allows you to receive data at an outside location, which is useful when a quick measure is re-
quired.
Preparation flow
The following describes a preparation flow for sending scanned data. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1 Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the network cable. For details, refer to page 3-32.
2 Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-32.
3 Configuring the E-mail transmission environment (Administrator)
% Configure a server for E-mail TX. For details, refer to page 3-33.
4 Configuring administrator information (Administrator)
% Register the administrator name and E-mail address used as the sender's address of an E-mail to
be sent. For details, refer to page 3-34.
Operation flow
The following describes a transmission flow. For details, refer to page 3-35.
1 Loading the original
2 Entering a destination
% Enter the destination E-mail address, and check the settings such as the file type and image quality.
3 Press the Start key.
% Press the Start key to scan the original.
3-32 bizhub C658/C558/C458/C368/C308/C258
Scan-to-Send function
3
3.2
Checking the cable connection
Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.
Checking network settings of this machine
Tap [Utility], and select [Device Information].
Check that the IP address is displayed.
Tips
- In general, the default settings are available for network connection; however, some network environ-
ments require a change on network settings.
- If no IP address is displayed, you need to configure the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide CD/DVD.
- For information on the default administrator password, refer to User’s Guide CD/DVD.
bizhub C658/C558/C458/C368/C308/C258 3-33
3.2 Scan-to-Send function
3
Configuring the E-mail transmission environment
1 Tap [Utility], and select [Administrator Settings] - [Network Settings] - [E-Mail Settings].
% For information on the default administrator password, refer to User’s Guide CD/DVD.
2 Tap [E-Mail TX (SMTP)].
3 Select [ON] to enable E-mail TX (SMTP) settings and E-mail TX function.
3
1
2
3-34 bizhub C658/C558/C458/C368/C308/C258
Scan-to-Send function
3
3.2
4 Enter the SMTP server address.
Configuring administrator information
1 Tap [Utility], and select [Administrator Settings] - [Administrator/Machine Settings] - [Administrator Reg-
istration].
2 Enter the required information, then tap [OK].
1
2
1
2
3
bizhub C658/C558/C458/C368/C308/C258 3-35
3.2 Scan-to-Send function
3
Sending the original
1 Load the original.
2 Tap [Scan/Fax].
3 Enter a destination.
1
2
3-36 bizhub C658/C558/C458/C368/C308/C258
Scan-to-Send function
3
3.2
4 Check the setting if necessary.
% Tap [Check Setting] to check the setting.
% You can also check the setting using the keys displayed on the Touch Panel.
% To change the setting, tap the desired key on the Touch Panel.
Settings Description
[Simplex/Duplex] Select whether to scan one or both sides of the original.
[Resolution] Specify the scanning resolution.
[Color] Select whether to scan the original in color or black and white mode.
[File Type] Select the type of the file to save scanned data.
[Scan Size] Specify the size of the original to be scanned.
[File Name/Subject
Name/Other]
Change the file name or the subject of an E-mail to be sent.
[Separate Scan] If all pages of the original cannot be loaded into the ADF at one time,
change the setting to ON. You can load the pages of the original in
several batches and handle them as one job. For details on using
the separate scan function, refer to the User's Guide CD/DVD.
3
4
bizhub C658/C558/C458/C368/C308/C258 3-37
3.2 Scan-to-Send function
3
5 Press the Start key.
3-38 bizhub C658/C558/C458/C368/C308/C258
Fax function
3
3.3
3.3 Fax function
3.3.1 Required settings and basic operations
This section describes the settings required to send and receive a fax via a telephone line as well as the basic
operations.
Tips
- To use the Fax function, the optional Fax Kit must be installed in this machine.
Preparation flow
The following describes a preparation flow to send a fax. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1 Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the telephone line. For details, refer to page 3-39.
2 Registering transmission information (Administrator)
% Specify the name and fax number to be displayed as a sender when sending a fax from this ma-
chine. For details, refer to page 3-39.
3 Selecting the dialing method (Administrator)
% Select the dialing method to suit your environment. For details, refer to page 3-40.
Operation flow
The following describes a flow to send a fax. For details, refer to page 3-41.
1 Loading the original
2 Entering a destination
% Enter the destination fax number, and check the settings such as the image quality.
3 Press the Start key.
% Press the Start key to send the original.
bizhub C658/C558/C458/C368/C308/C258 3-39
3.3 Fax function
3
Checking the cable connection
Check that a modular cable is connected to the LINE port of this ma-
chine.
Registering transmission information
1 Tap [Utility], and select [Administrator Settings] - [Fax Settings] - [Header Information].
% For information on the default administrator password, refer to User’s Guide CD/DVD.
2 Enter the sender information, then tap [OK].
2
1
3
3-40 bizhub C658/C558/C458/C368/C308/C258
Fax function
3
3.3
Selecting the dialing method
1 Tap [Utility], and select [Administrator Settings] - [Fax Settings] - [Line Parameter Setting].
2 Tap [Dialing Method].
Sender settings Sender Fax No. Settings
Enter the name to be displayed as a sender. Enter the fax number to be displayed as a sender.
bizhub C658/C558/C458/C368/C308/C258 3-41
3.3 Fax function
3
3 For the push-button type, select [PB], and for the dial-pulse type, select [10pps].
If you do not know the type of the dialing method:
- If you do not know the type of the dialing method, operate push buttons of your phone. When you hear
"beep boop beep", set [Dialing Method] to [PB].
- If you do not hear "beep boop beep" after operating push buttons, select [10pps].
Sending the original
1 Load the original.
2 Tap [Scan/Fax].
1
2
3-42 bizhub C658/C558/C458/C368/C308/C258
Fax function
3
3.3
3 Enter a destination.
4 Check the setting if necessary.
% Tap [Check Setting] to check the setting.
% You can also check the setting using the keys displayed on the Touch Panel.
% To change the setting, tap the desired key on the Touch Panel.
1
2
3
4
bizhub C658/C558/C458/C368/C308/C258 3-43
3.3 Fax function
3
[Color], [File Type], and [File Name/Subject Name/Other] are not available when sending to a fax num-
ber.
5 Press the Start key.
3.3.2 Sending a fax directly from a PC (PC-FAX TX)
You can send a fax to the destination fax machine in the same manner as you print out data created on your
computer.
Advantages to send a fax directly from a computer
- Realizing paper saving
- Completing fax operations without leaving your desk
- Offering clear images by sending data directly from a computer
Tips
- To use this function, the optional Fax Kit must be installed in this machine.
- This function is not supported in the Mac operating system.
Settings Description
[Simplex/Duplex] Select whether to scan one or both sides of the original.
[Resolution] Specify the scanning resolution.
[Scan Size] Specify the size of the original to be scanned.
[Separate Scan] If all pages of the original cannot be loaded into the ADF at one time,
change the setting to ON. You can load the pages of the original in
several batches and handle them as one job. For details on using the
separate scan function, refer to the User's Guide CD/DVD.
3-44 bizhub C658/C558/C458/C368/C308/C258
Fax function
3
3.3
Preparation flow
The following describes a preparation flow to send a fax from a computer. For details, refer to the relevant
page.
This preparation is not required the second time or subsequent times.
1 Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the telephone line and network cable. For details,
refer to page 3-44.
2 Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-45.
The network can be used with the default settings unless otherwise requested.
3 Installing the fax driver on your computer
% Install the printer driver on your computer. For details, refer to page 3-46.
Operation flow
The following describes a flow to send a fax. For details, refer to page 3-47.
1 Creating data
% Create data to be sent using application software.
2 Configuring the fax driver
% Select a fax driver, and change the setting if necessary.
3 Entering a destination to send data
% Enter a destination to send data.
Checking the cable connection
1 Check that a modular cable is connected to the LINE port of
this machine.
2 Check that a LAN cable is connected to the LAN port of this
machine and the green LED is on.
bizhub C658/C558/C458/C368/C308/C258 3-45
3.3 Fax function
3
Checking network settings of this machine
Tap [Utility], and select [Device Information]. Check that the IP address is displayed.
Tips
- In general, the default settings are available for network connection; however, some network environ-
ments require a change on network settings.
- If no IP address is displayed, you need to configure the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide CD/DVD.
- For information on the default administrator password, refer to User’s Guide CD/DVD.
3-46 bizhub C658/C558/C458/C368/C308/C258
Fax function
3
3.3
Installing the fax driver
Use the installer to install the fax driver.
This section describes how to configure the standard print settings.
0 This operation requires administrator privileges for your computer.
1 Insert the fax driver CD/DVD-ROM into the CD/DVD-ROM
drive of the computer.
2 Select [Agree the Software End User License Agreement.] and [Install printers/MFPs], and click [Next].
3 Select this machine from the list of detected printers.
% If multiple identical models are displayed, check the IP address to select an appropriate one. For
details on how to check the IP address of this machine, refer to page 3-45.
4 Select [Specify manually.], and check [FAX] is selected.
5 Click [Next].
6 Click [Install].
7 Click [Finish].
bizhub C658/C558/C458/C368/C308/C258 3-47
3.3 Fax function
3
Sending data
1 Create data to be sent using application software.
2 From the [File] menu, select [Print].
3 Select the fax driver of this machine, and click [Print].
% Clicking [Preferences] can change the setting of the printer driver as required.
% If user authentication is enabled in this machine, specify the required data such as the user name
and password.
4 Enter the destination [Name] and [FAX Number].
% To send data to more than one destination, repeat this step.
% Clicking [Add from Address Book] can retrieve the registered destinations of this machine.
5 Click [OK].
3-48 bizhub C658/C558/C458/C368/C308/C258
Copy function
3
3.4
3.4 Copy function
Basic operations
The following describes the basic operations to make a copy.
1 If user authentication is enabled, the login screen appears. Tap the entry area or keyboard icon to enter
the required information, then tap [Login] or press the Access key.
% If IC card or biometric authentication is enabled, refer to page 3-50.
2 Load the original.
3 Tap [Copy].
2
1
bizhub C658/C558/C458/C368/C308/C258 3-49
3.4 Copy function
3
4 Check the basic settings.
% Check the output image configured as specified while viewing the output illustrations displayed on
the Touch Panel.
% Tapping [Check Setting] can check detailed settings.
% To change the setting, tap the desired key on the Touch Panel.
5 Tap the input area for entering the number of copies.
Settings Description
[Original Type] Specify the original type of the original.
[Color] Specify the color to output an image.
[Booklet] The pages in the original data are arranged and spread in a booklet
format and printed on both sides of sheets.
[Paper] Specify the output paper.
[Zoom] Specify the zoom ratio.
[Duplex/Combine] Specify double-sided copying or combine copying.
[Finishing] Configure the offset, punch, or staple setting for output paper.
[Density] Adjust the copy density.
3-50 bizhub C658/C558/C458/C368/C308/C258
Copy function
3
3.4
6 Enter the number of copies using the Keypad, and press the
Start key.
User authentication
You can perform authentication by user or group in this machine.
Installing optional units enables IC card, NFC, or biometric authentication.
If IC card or NFC authentication is enabled, place the IC
card or Android terminal on the card reader of the authenti-
cation unit.
If biometric authentication is enabled, put your finger on the
finger vein reader of the authentication unit.
bizhub C658/C558/C458/C368/C308/C258 3-51
3.5 Registering a destination
3
3.5 Registering a destination
3.5.1 Registering an address book
The fax and scan-to-send functions can register the frequently used destinations as address books. This sec-
tion explains an example to register an address book to which a fax is sent.
Using the Control Panel to register an address book - Registration from Util-
ity
Select a destination type, and register destination information.
1 Tap [Utility], and select [One-Touch/User Box Registration] - [Create One-Touch Destination] - [Address
Book].
2 Select the type of the destination you want to register.
3 Tap [New].
3-52 bizhub C658/C558/C458/C368/C308/C258
Registering a destination
3
3.5
4 Enter the destination name you want to register.
% Tap [Name], and enter the destination name using the displayed keyboard.
% For [Sort Character], enter the same name as [Name].
% This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change
the setting, tap [Index].
% Entry items and the number of setting screens vary depending on the destination type. Use [ ] or
[ ] to switch setting screens while entering the required items. For information on entry items, refer
to page 3-59.
5 Enter the fax number.
% Tap [Display Keypad] to display the Keypad, and enter the fax number.
6 Tap [Close].
1
2
3
1
3
2
bizhub C658/C558/C458/C368/C308/C258 3-53
3.5 Registering a destination
3
Using the Control Panel to register an address book - Registration from Ad-
dress book
Select a destination type, and register destination information.
1 Tap [Address book].
2 Tap [New].
3 Select the type of the destination you want to register.
3-54 bizhub C658/C558/C458/C368/C308/C258
Registering a destination
3
3.5
4 Enter the destination name you want to register.
% For [Name], enter the destination name using the displayed keyboard.
% For [Sort Character], enter the same name as [Name].
% This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change
the setting, tap the [Index] field.
% Entry items and the number of setting screens vary depending on the destination type. For informa-
tion on entry items, refer to page 3-59.
5 Enter the fax number.
6 Tap [Close].
1
2
1
2
bizhub C658/C558/C458/C368/C308/C258 3-55
3.5 Registering a destination
3
Using the Control Panel to register an address book - Registration in
scan/fax mode
Select a destination type, and register destination information.
1 Display the scan/fax screen.
2 Tap [Address Reg.].
3 Tap [New].
4 Select the type of the destination you want to register.
3-56 bizhub C658/C558/C458/C368/C308/C258
Registering a destination
3
3.5
5 Enter the destination name you want to register.
% For [Name], enter the destination name using the displayed keyboard.
% For [Sort Character], enter the same name as [Name].
% This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change
the setting, tap the [Index] field.
% Entry items and the number of setting screens vary depending on the destination type. For informa-
tion on entry items, refer to page 3-59.
6 Enter the fax number.
7 Tap [Close].
1
2
1
2
bizhub C658/C558/C458/C368/C308/C258 3-57
3.5 Registering a destination
3
Registration by Direct Input
- The destination entered by using the [Direct Input] button can be registered before sending data as well.
To register the destination, tap [Address Reg.] after entering the destination using direct input, and then
select the destination.
What is an index?
- This is used as an index of a registered destination. Tap the Index key to narrow down a target desti-
nation.
- If [Favorite] is selected as an index, the destination appears in the basic screen of the transmission
screen after it has been registered in the address book; enabling the user to easily select a destination.
3-58 bizhub C658/C558/C458/C368/C308/C258
Registering a destination
3
3.5
Using a computer to register a one-touch destination
In addition to using the Control Panel, address books can be registered from a computer using the utility
software, Web Connection.
1 Check the IP address of this machine
% Tap [Utility], and select [Device Information]. Check that the IP address is displayed.
% If no IP address is displayed, you need to configure the network. For details, refer to the User's
Guide CD/DVD.
2 Start a Web browser, enter the IP address of this machine into the URL field, then press the [Enter] key.
% For "http://192.168.1.20/", "192.168.1.20" is an IP address.
% In the IPv6 environment, enclose the IPv6 address in brackets [ ]. For example, if the IPv6 address
of this machine is "fe80::220:6bff:fe10:2f16", type in "http://[fe80::220:6bff:fe10:2f16]/".
% If the login screen appears, enter the required items, then click [Login].
3 Select [Store Address] - [Address Book] and click [New Registration].
4 Select the type of the destination you want to register, and enter the required information such as the
name, fax number, and index.
bizhub C658/C558/C458/C368/C308/C258 3-59
3.5 Registering a destination
3
3.5.2 Information required to register a destination
The items to be entered or the number of screens required to register a destination vary depending on the
transmission type. This section describes specific information required to register a destination.
Tips
- Setting items that can generally be used with defaults are omitted in this table.
Item Description
[E-Mail] [Name] Enter the name of the destination to be registered
as an address book.
[E-Mail Address] Enter the E-mail address used as the destination.
[User Box] [Name] Enter the name of the destination to be registered
as an address book.
[User Box] Select a User Box to be used as a destination.
[Fax] [Name] Enter the name of the destination to be registered
as an address book.
[Fax Number] Enter the fax number of the destination.
[PC (SMB)] [Name] Enter the name of the destination to be registered
as an address book.
[User ID] Enter the login name of the destination computer.
[Password] Enter the password required to log in to the com-
puter.
[Host Address] Enter the computer name or IP address.
[File Path] Enter the folder name to be used as the destina-
tion.
[FTP] [Name] Enter the name of the destination to be registered
as an address book.
[Host Address] Enter the address of the FTP server.
[File Path] Enter the directory to be used as the destination.
[User ID] Enter the user ID required to log in with FTP.
[Password] Enter the password required to log in with FTP.
[WebDAV] [Name] Enter the name of the destination to be registered
as an address book.
[User ID] Enter the user ID required to log in with WebDAV.
[Password] Enter the password required to log in with Web-
DAV.
[Host Address] Enter the address of the WebDAV server.
[File Path] Enter the directory to be used as the destination.
3-60 bizhub C658/C558/C458/C368/C308/C258
Registering a destination
3
3.5
3.5.3 Registering a group
Several address books can be registered as a group.
This function is useful when you have jobs involving sending data to specified members at periodic intervals.
Registering a new group
1 Tap [Utility], and select [One-Touch/User Box Registration] - [Create One-Touch Destination] - [Group].
2 Tap [New].
3 Enter the destination name you want to register.
% Tap [Name], and enter the destination name using the displayed keyboard.
% For [Sort Character], enter the same name as [Name].
% This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change
the setting, tap [Index].
1
2
3
bizhub C658/C558/C458/C368/C308/C258 3-61
3.5 Registering a destination
3
4 Select destinations to be grouped.
Display and select the target address book on the destination selection screen. The following two meth-
ods can be used to search for a destination.
% [Index]: Searches for the target destination name using an index.
% [Registration Number]: Searches for the target destination using a registration number.
5 Repeat Step 4 until you select all address books to be grouped.
3-62 bizhub C658/C558/C458/C368/C308/C258
Registering a destination
3
3.5
3.5.4 Retrieving a registered destination
Retrieve an address book or group to specify it as a destination to which data is sent.
Retrieving a destination
1 Tap [Scan/Fax].
The destinations, which are categorized into [Favorite] when registering indexes, are displayed on the
basic screen.
bizhub C658/C558/C458/C368/C308/C258 3-63
3.5 Registering a destination
3
2 Narrow down destinations using index and address type.
2
1
3
4
3-64 bizhub C658/C558/C458/C368/C308/C258
Registering a destination
3
3.5
Specifying a destination
In addition to retrieving a registered destination, a destination can be specified in various methods.
dReference
For details, refer to the User's Guide CD/DVD.
Method Description
[Direct Input] Directly enter a destination using the keyboard screen or Keypad.
[Job History] Specify a target destination in the job history (latest five destinations) on
the scan/fax screen.
[Addr. Search] Retrieves destination candidates by the prefix search function using the
name (registered destination name) or address (fax number, E-mail ad-
dress, or computer name). This function is convenient when there are
too many registered destinations.
bizhub C658/C558/C458/C368/C308/C258 3-65
3.6 Using a USB memory device
3
3.6 Using a USB memory device
3.6.1 Printing data in a USB memory device
Data saved in the USB memory device can be printed. This function is useful when printing data created on
a computer that is not connected to the network.
Available USB memory device
- Compatible with USB version 2.0/1.1 interface
- Formatted in FAT32
- Without security function added, or with security function that can be turned off as required
- There is no upper limit for the memory size.
Available printing file types
- PDF, Compact PDF, JPEG, TIFF, XPS, Compact XPS, OOXML (.docx/.xlsx/.pptx), and PPML
(.ppml/.vdx/.zip)
- Other file types are not supported on this machine.
Printing data
1 Connect a USB memory device to this machine.
NOTICE
Use the USB connector on the side that is near the Control Panel.
Do not use a USB device other than a flash-memory device.
2 Tap [Print a document from External Memory.].
3-66 bizhub C658/C558/C458/C368/C308/C258
Using a USB memory device
3
3.6
3 Select data to be printed, and tap [Print].
4 Check print settings.
2
1
4
3
bizhub C658/C558/C458/C368/C308/C258 3-67
3.6 Using a USB memory device
3
5 Press the Start key.
NOTICE
Do not disconnect the USB memory device during data print-
ing.
3.6.2 Saving the scanned data in the USB memory device (External memory)
The data scanned on this machine can be saved to the USB memory device, so it is convenient when printing
data created on a computer that is not connected to the network.
Available USB memory device
- Compatible with USB version 2.0/1.1 interface
- Formatted in FAT32
- Without security function added, or with security function that can be turned off as required
- There is no upper limit for the memory size.
Specifying functions to be permitted for external memory
Change the settings to save documents in the USB memory device.
1 Tap [Utility], and select [Administrator Settings] - [System Settings] - [User Box Settings].
% For information on the default administrator password, refer to User’s Guide CD/DVD.
3-68 bizhub C658/C558/C458/C368/C308/C258
Using a USB memory device
3
3.6
2 Tap [External Memory Functional Settings].
3 Select [Save Document] and [ON]. Tap [OK].
1
2
3
bizhub C658/C558/C458/C368/C308/C258 3-69
3.6 Using a USB memory device
3
Saving data in the USB memory device
1 Load the original.
2 Connect a USB memory device to this machine.
NOTICE
Use the USB connector on the side that is near the Control Panel.
Do not use a USB device other than a flash-memory device.
3 Tap [Save a document to External Memory.].
3-70 bizhub C658/C558/C458/C368/C308/C258
Using a USB memory device
3
3.6
4 Check the file name.
5 If necessary, check the setting to save data.
% Tap [Check Setting] to check the setting.
% To change a file name, tap the file name or keyboard icon.
% You can also check the setting using the keys displayed on the Touch Panel.
% To change the setting, tap the desired key on the Touch Panel.
Settings Description
[Simplex/Duplex] Select whether to scan one or both sides of the original.
[Resolution] Specify the scanning resolution.
[Color] Select whether to scan the original in color or black and white mode.
[File Type] Select the type of the file to save scanned data.
[Scan Size] Specify the size of the original to be scanned.
[Separate Scan] If all pages of the original cannot be loaded into the ADF at one time,
change the setting to ON. You can load the pages of the original in sev-
eral batches and handle them as one job. For details on using the sep-
arate scan function, refer to the User's Guide CD/DVD.
bizhub C658/C558/C458/C368/C308/C258 3-71
3.6 Using a USB memory device
3
6 Press the Start key.
NOTICE
Do not disconnect the USB memory device during data saving.
3-72 bizhub C658/C558/C458/C368/C308/C258
Using the guidance function
3
3.7
3.7 Using the guidance function
3.7.1 Guidance screen
This machine provides the guidance function to display the description of a function on the screen and view
an operation procedure with moving images.
If you have any questions during operation, try to use this guidance function.
Getting help on the currently displayed screen:
Select [Function] on the Help Menu to display the guidance screen.
1 Press the Guidance key (default: Register key 2).
2 Select a menu.
bizhub C658/C558/C458/C368/C308/C258 3-73
3.7 Using the guidance function
3
3 Narrow down the information you want to know.
3-74 bizhub C658/C558/C458/C368/C308/C258
Using the guidance function
3
3.7
Getting help on the desired function or procedure:
Open the Help Menu, and select a menu depending on an objective to display the guidance screen.
1 Press the Guidance key (default: Register key 2).
2 Select a menu.
Name Description
[Exit] Returns to the screen that is displayed before the guidance screen.
[To Menu] Returns to the Help Menu.
[Close] Returns to the preceding screen.
bizhub C658/C558/C458/C368/C308/C258 3-75
3.7 Using the guidance function
3
3 Narrow down the information you want to know.
3-76 bizhub C658/C558/C458/C368/C308/C258
Using the guidance function
3
3.7
4 Tapping [Go to function] opens the setting screen of a target function, enabling you to configure the
settings immediately.
Help Menu list
The Help Menu provides the following information:
Name Description
[Function] Tap this button to display the guidance menu that has been sorted ac-
cording to the function names to be displayed on the screen.
[Search by Operation] Tap this button to display operation examples and explanations of this
machine sorted by function.
[Other Functions] Tap this button to display the guidance menu of the functions and set-
tings that make it easier to use this machine.
[Name and Function of Parts] Tap this button to check the name or function of each part of this ma-
chine.
[Service/Admin. Information] Tap this button to display the service or administrator information, ad-
ministrator name, extension number, and E-mail address.
[Consumables Replace/Pro-
cessing Procedure]
Tap this button to check the consumables replacement or punch scrap-
ping procedure.
bizhub C658/C558/C458/C368/C308/C258 3-77
3.8 Using the [Quick Security] function
3
3.8 Using the [Quick Security] function
3.8.1 [Quick Security]
[Quick Security] allows you to configure the settings for enhancing the security level of this machine. In order
to use this machine securely, we recommend that you use the [Quick Security] function to configure the set-
tings.
Required settings
1 Tap [Utility], and select [Administrator Settings] - [Forward] - [Security Settings] - [Forward] - [Quick Se-
curity Setting].
% For information on the default administrator password, refer to User’s Guide CD/DVD.
2 Configure a setting for each option.
Settings Description
[Administrator Password] Change the administrator password of this machine.
[USB Enable Settings] Specify whether to permit a function that requires the USB Port.
[Password Rules] Configure whether to enable the password rules. Once you enable
them, the number of characters and text types that are available for
passwords is restricted.
[Quick IP Filtering] Allows you to restrict the devices that can access this machine using
the IP address (IPv4/IPv6). The range of IP addresses for which ac-
cess is to be restricted is specified automatically.
[PSWC Setting] Select whether to use Web Connection.
3-78 bizhub C658/C558/C458/C368/C308/C258
Using the [Quick Security] function
3
3.8
% When [Security Warning Display Setting] is set to [ON], the following security warning screen ap-
pears if the administrator password remains set to the default or if password rules are not satisfied.
Tap [Set Now] to configure the [Quick Security] function.
Tips
- You can specify whether to display the [Quick Security] key on the main menu. This key is not displayed
in the default state. To display the key, tap [Utility], and select [Administrator Settings] - [System Set-
tings] - [Custom Display Settings] - [Main Menu Default Settings] - [Main Menu Key].
- In some regions, the [Quick Security] key is displayed on the main menu by default. However, if [Ad-
ministrator Password] in [Quick Security Setting] was changed from the default setting and [Password
Rules] is set to [Enable], the [Quick Security] key will not be displayed on the main menu. To display the
key again, tap [Utility], and select [Administrator Settings] - [System Settings] - [Custom Display Set-
tings] - [Main Menu Default Settings] - [Main Menu Key].
- For information on the default administrator password, refer to User’s Guide CD/DVD.
dReference
For details, refer to the User's Guide CD/DVD.
[Security Warning Display
Setting]
Select whether to display the security warning screen if the admin-
istrator password remains set to the default or if password rules are
not satisfied.
Settings Description
4
Advanced Functions
bizhub C658/C558/C458/C368/C308/C258 4-3
4.1 Using advanced functions
4
4 Advanced Functions
4.1 Using advanced functions
4.1.1 What are advanced functions?
Various functions for further enhancement of the MFP operability are expressed as advanced functions in this
manual.
This machine provides the following advanced functions.
Tips
- To use an advanced function, you need to register i-Option or associate with the My Panel Manager
application.
In addition, this machine supports advanced functions such as the barcode font, unicode font, and OCR font.
Name Description
PDF processing You can configure the required settings when converting scanned data to
a PDF file.
This requires the registration of i-Option LK-102 v3 or i-Option
LK-110 v2.
Searchable PDF You can convert the scanned data to a searchable PDF file.
This requires the registration of i-Option LK-105 v4 or i-Option
LK-110 v2.
File Type Extension Supports functions such as a function that converts a file into a DOCX or
XLSX type, a function that generates highly-functional and high quality da-
ta, and the E-mail RX Print function.
This requires the registration of i-Option LK-110 v2.
ThinPrint Allows you to use this machine as ThinPrint Client (.print Client) when Thin-
Print is enabled.
This requires the registration of i-Option LK-111.
TPM You can use the Trusted Platform Module to enhance security by encrypt-
ing confidential information such as certificates and passwords of this ma-
chine.
This requires the registration of i-Option LK-115 v2.
Serverless Pull Printing Allows you to execute print jobs, which were stored on a device from your
computer, from any device in the same serverless pull printing group.
This requires the registration of i-Option LK-114.
My Panel You can customize the Control Panel display of this machine for each us-
er.
This requires the association with My Panel Manager.
My Address You can use the address book for personal use (My Address Book).
This requires the association with My Panel Manager.
4-4 bizhub C658/C558/C458/C368/C308/C258
Using advanced functions
4
4.1
dReference
For details, refer to the User's Guide CD/DVD.
4.1.2 Association with application
To use the My Panel or My Address function, you need to purchase My Panel Manager and enable the target
function in the application side.
For details on how to enable such a function, refer to the My Panel Manager User's Guide.
Tips
- The optional Extension Memory is required to use the My Address function. bizhub C658/C558/C458
provides Extension Memory as standard.
4.1.3 Registering the i-Option license
To add an optional function to this machine, you need to purchase i-Option and register its license.
Tips
- Check that this machine can be connected to the Internet.
- When enabling the i-Option function via the Internet, connect this machine to the License Management
Server (LMS) through the proxy server used for remote diagnosis. For details on configuring the proxy
server used for remote diagnosis, refer to the User's Guide CD/DVD.
- The optional Extension Memory is required to use
i-Option LK-102 v3/LK-105 v4/LK-106/LK-107/LK-108/LK-110 v2/LK-114.
bizhub C658/C558/C458 provides Extension Memory as standard.
- i-Option LK-110 v2 includes the function licenses for i-Option LK-102 v3 and i-Option LK-105 v4. If
you purchase i-Option LK-110 v2, you do not need to purchase i-Option LK-102 v3 or i-Option
LK-105 v4.
For details on how to purchase or install an optional unit, contact your service representative.
Preparation flow
The following describes a preparation flow to use advanced functions. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1 Enabling the i-Option function (Administrator)
% Enable the i-Option function on this machine. For details, refer to page 4-5.
% If you cannot enable the function above, proceed to steps 2 and 3.
2 Registering the i-Option license (Administrator)
% Register the license on a dedicated Web site. For details, refer to page 4-6.
3 Enabling the i-Option function using the license (Administrator)
% Enter the license code to enable the function. For details, refer to page 4-9.
4 Configuring each function (Administrator)
% Configure the required settings for each advanced function. For details, refer to page 4-10.
dReference
For details on the procedure, refer to the User's Guide CD/DVD.
bizhub C658/C558/C458/C368/C308/C258 4-5
4.1 Using advanced functions
4
Enabling the i-Option function
1 Prepare at hand the token certificate supplied with i-Option.
2 Tap [Utility], and select [Administrator Settings] - [Forward] - [License Settings] - [Install License] - [To-
ken Code].
% For information on the default administrator password, refer to User’s Guide CD/DVD.
3 Enter the token number shown in the token certificate.
4 Select [Yes], then tap [OK].
This machine is connected to the Internet to communicate with the License Management Server (LMS),
and it restarts automatically.
1
2
1
2
4-6 bizhub C658/C558/C458/C368/C308/C258
Using advanced functions
4
4.1
Registering the i-Option license
Register the request code and the contents of the token certificate on the Web site of the License Manage-
ment Server (LMS).
This procedure is available when this machine cannot be connected to the Internet.
1 Tap [Utility], and select [Administrator Settings] - [Forward] - [License Settings] - [Get Request Code].
% For information on the default administrator password, refer to User’s Guide CD/DVD.
2 Tap [Yes] and [OK].
3 Tapping [Print] prints the serial number and request code.
% Prepare at hand the printed serial number, request code, and token certificate supplied with i-Op-
tion.
1
2
bizhub C658/C558/C458/C368/C308/C258 4-7
4.1 Using advanced functions
4
4 Access the Web site of the License Management Server (LMS). Enter the [MFP Serial Number] and [Re-
quest Code], then click [Next].
% The URL is https://lms.konicaminolta.com/index.aspx.
5 Enter the [Token Number], select the option you want to register from the [Product Description] list, then
click [Next].
6 Confirm the registration contents, then click [Generate License Code].
1
2
1
2
4-8 bizhub C658/C558/C458/C368/C308/C258
Using advanced functions
4
4.1
7 The license code and function code are issued.
Tips
- The issued license code and function code are required to enable i-Option. You should write them
down on a memo pad or print them out on paper by clicking [Print].
- You could also store them in your USB memory device. The license code input could be omitted by
using a USB memory device to achieve a convenient operation.
- When using a USB memory device, insert the USB memory device and click [Download] to store the
license code.
bizhub C658/C558/C458/C368/C308/C258 4-9
4.1 Using advanced functions
4
Enabling the i-Option function using the license (Administrator)
Register the license and function codes in this machine.
This procedure is available when this machine cannot be connected to the Internet.
By inputting the codes
1 Tap [Utility], and select [Administrator Settings] - [Forward] - [License Settings] - [Install License] -
[Function/Licence Code].
% For information on the default administrator password, refer to User’s Guide CD/DVD.
2 Enter the license and function codes you wrote down.
3 Select [Yes], then tap [OK].
This machine restarts automatically.
1
2
3
1
2
4-10 bizhub C658/C558/C458/C368/C308/C258
Using advanced functions
4
4.1
By using a USB memory device
1 Connect the USB memory device stored with the license
code.
2 Tap [Utility], and select [Administrator Settings] - [Forward] - [License Settings] - [Install License from
Ext. Memory].
3 Select [Yes], then tap [OK].
This machine restarts automatically.
Configuring each function
Configure the required settings for each advanced function.
dReference
For details on the required setting items for each advanced function, refer to the User's Guide CD/DVD.
1
2
bizhub C658/C558/C458/C368/C308/C258 4-11
4.2 Using the Web browser function
4
4.2 Using the Web browser function
4.2.1 Required settings and procedures
The Web browser can be used on the Touch Panel of this machine.
This section describes how to display and print a Web page on the Touch Panel of this machine.
Tips
- Check that this machine can be connected to the Internet.
- When enabling the Web browser function via the Internet, connect this machine to the License Man-
agement Server (LMS) through the proxy server used for remote diagnosis. For details on configuring
the proxy server used for remote diagnosis, refer to the User's Guide CD/DVD.
- To use the Web browser, administrator settings are required in advance.
Preparation flow
The following describes a preparation flow to use the Web browser function. For details, refer to the relevant
page.
This preparation is not required the second time or subsequent times.
1 Enabling the Web browser function (Administrator)
% Enable the Web browser function on this machine. For details, refer to page 4-12.
% If you cannot enable the Web browser above, proceed to steps 2 and 3.
2 Registering the license (Administrator)
% Register the license on a dedicated Web site. For details, refer to page 4-13.
3 Enabling the Web browser using the license (Administrator)
% Enter the license code to enable the function. For details, refer to page 4-15.
4-12 bizhub C658/C558/C458/C368/C308/C258
Using the Web browser function
4
4.2
Operation flow
The following describes an operation flow. For details, refer to the relevant page.
1 Starting the Web browser
% For details, refer to page 4-19.
2 Displaying Web pages
% For details, refer to page 4-19.
3 Printing the currently displayed page or the linked file
% For details, refer to page 4-20.
dReference
For details, refer to the User's Guide CD/DVD.
Enabling the Web browser function
1 Tap [Utility], and select [Administrator Settings] - [Network Settings] - [Forward] (twice) - [Web Browser
Settings] - [Web Browser Usage Settings].
% For information on the default administrator password, refer to User’s Guide CD/DVD.
2 Select [ON], then tap [OK].
This machine is connected to the Internet to communicate with the License Management Server (LMS),
and it restarts automatically.
1
2
bizhub C658/C558/C458/C368/C308/C258 4-13
4.2 Using the Web browser function
4
Registering the license
Register the serial number of this machine on the Web site of the License Management Server (LMS).
This procedure is available when this machine cannot be connected to the Internet.
1 Display the serial number of this machine. Tap [Utility], and select [Device Information].
2 Write down the serial number of this machine.
3 Access the Web site of the License Management Server (LMS). Enter the [MFP Serial Number], then
click [Next].
% The URL is https://lms.konicaminolta.com/activate.
4 Check the message, then click [OK].
1
2
4-14 bizhub C658/C558/C458/C368/C308/C258
Using the Web browser function
4
4.2
5 The license code is issued.
Tips
- The issued license code is required to enable Web browser function. You should write them down on
a memo pad or print them out on paper by clicking [Print].
- You could also store them in your USB memory device. The license code input could be omitted by
using a USB memory device to achieve a convenient operation.
- When using a USB memory device, insert the USB memory device and click [Download] to store the
license code.
bizhub C658/C558/C458/C368/C308/C258 4-15
4.2 Using the Web browser function
4
Enabling the Web browser using the license
Register the license code in this machine.
This procedure is available when this machine cannot be connected to the Internet.
By inputting the codes
1 Tap [Utility], and select [Administrator Settings] - [Network Settings] - [Forward] (twice) - [Web Browser
Settings] - [Web Browser Usage Settings].
% For information on the default administrator password, refer to User’s Guide CD/DVD.
2 Select [ON], then tap [OK].
3 When the screen shown below appears, tap [Function/License Code].
1
2
4-16 bizhub C658/C558/C458/C368/C308/C258
Using the Web browser function
4
4.2
4 Enter the license code you wrote down.
5 Select [Yes], then tap [OK].
This machine restarts automatically.
2
1
1
2
bizhub C658/C558/C458/C368/C308/C258 4-17
4.2 Using the Web browser function
4
By using a USB memory device
1 Tap [Utility], and select [Administrator Settings] - [Network Settings] - [Forward] (twice) - [Web Browser
Settings] - [Web Browser Usage Settings].
2 Select [ON], then tap [OK].
3 Wait a few moments until the screen shown below appears.
1
2
4-18 bizhub C658/C558/C458/C368/C308/C258
Using the Web browser function
4
4.2
4 Connect the USB memory device stored with the license
code.
5 Select [Install License from Ext. Memory].
6 Select [Yes] , then tap [OK].
This machine restarts automatically.
1
2
bizhub C658/C558/C458/C368/C308/C258 4-19
4.2 Using the Web browser function
4
Starting the Web browser
% Tap [Web Browser].
The Web browser starts.
Tips
- The pre-specified home page appears.
Displaying Web pages
1 Tap the URL display area.
2 Enter the URL of a desired page, then tap [OK].
The target page appears.
Tips
- Selecting [Menu] - [Display] allows you to zoom in and out from a page or change the character code.
- Selecting [Menu] - [Tab] allows you to open a new tab and display a different page.
4-20 bizhub C658/C558/C458/C368/C308/C258
Using the Web browser function
4
4.2
Printing the currently displayed page or the linked file
For the currently displayed page
1 Tap [Print].
2 Specify the output paper.
% To change the setting, tap the desired key on the Touch Panel.
3 Press the Start key.
For the linked file
This machine allows you to print a PDF file, XPS file, OOXML file, PPML file, or TIFF file.
1 Select a link to the printed file.
2 Tap [Print].
% When linking to a PDF file, you can tap [View] to check its contents before printing the file.
3 Specify the output paper.
% To change the setting, tap the desired key on the Touch Panel.
4 Press the Start key.
Settings Description
[Color] Select whether to print in color or black and white mode.
[Simplex/Duplex] Select whether to print one side or both sides of sheets of paper.
To specify 2-sided printing, select the binding position.
[Finishing] Configure the offset, punch, or staple setting for output paper.
Settings Description
[Color] Select whether to print in color or black and white mode.
[Simplex/Duplex] Select whether to print one side or both sides of sheets of paper.
To specify 2-sided printing, select the binding position.
[Finishing] Configure the offset, punch, or staple setting for output paper.
5
Troubleshooting
bizhub C658/C558/C458/C368/C308/C258 5-3
5.1 Main messages and remedies
5
5 Troubleshooting
5.1 Main messages and remedies
5.1.1 When a message appears to replace consumables or carry out cleaning
A message appears indicating the time(s) that expiring consumables used in this machine should be re-
placed. Also, a message appears when the Slit Scan Glass is dirty.
Replace consumables mentioned in the displayed message or clean the Slit Scan Glass.
A message recommending that parts be replaced indicates that certain consumables are running out. Al-
though you can still continue to print for a while after the message is displayed, it is advisable to promptly
prepare replacement consumables.
- For Toner Cartridge: [Toner is low. Replace when indicated.] appears, followed by [Replace Toner Car-
tridge.]. Replace the Toner Cartridge based on the maintenance contract.
- For Staple Cartridge/Saddle Staple Cartridge: When the message [Replace the Staple Cartridge.] or
[Replace the Saddle Staple Cartridge 1 or 2.] appears, replace the staples.
- For Drum Unit: When the message [The Drum Unit needs to be replaced soon.] or [The Drum Unit
needs to be replaced.] appears, replace it based on the maintenance contract.
- For Developing Unit: When the message [The Developing Unit needs to be replaced.] appears, contact
your service representative.
- For Waste Toner Box: When the message [Waste Toner Box needs to be replaced.] appears, replace
it based on the maintenance contract.
Contact your service representative if the messages continue to appear even after replacement or cleaning
has been carried out.
5-4 bizhub C658/C558/C458/C368/C308/C258
Main messages and remedies
5
5.1
5.1.2 When a paper jam message persists
There may be a paper jam occurring in sections other than those indicated on the Touch Panel. Check the
sections again not shown on the Touch Panel.
Check the following items:
- Check for any pieces of paper left in the back of the section indicated on the Touch Panel. If the paper
cannot be easily removed, do not continue; instead contact your service representative.
- Once again, open and close the door at the section with the location number indicated on the Touch
Panel. This action may clear the message.
Contact your service representative if the paper jam indication persists even after you have checked.
5.1.3 When an error message appears
When an error is detected, the following message appears. Take the appropriate action according to the
message displayed on the screen. If you cannot resolve the error, write down the [Trouble Code], and contact
your service representative with the power plug disconnected from the power outlet.
In normal circumstances, the phone number and fax number for your service representative appear in the
center of the screen.
NOTICE
If a defective part can be separated in order to be able to continue operations after a problem has been de-
tected, [Continue] or [Recover Data] is displayed. To continue operations, select any key. However, the prob-
lem has not been resolved, so contact your service representative immediately.
bizhub C658/C558/C458/C368/C308/C258 5-5
5.1 Main messages and remedies
5
5.1.4 When [Stabilizing image.] appears
This automatically performs a function to adjust printing quality in order to maintain a certain level of color
reproduction quality. This "printing quality adjustment" is referred to as "image stabilization".
Image stabilization is performed while a large number of copies are being output or the temperature or hu-
midity inside the machine has changed.
Upon completion of image stabilization, printing is automatically resumed. Wait for a moment.
In case image stabilization does not finish after a short while, contact your service representative.
NOTICE
You cannot interrupt or prohibit image stabilization.
dReference
To perform image stabilization on a voluntary basis, refer to the User’s Guide CD/DVD.
5-6 bizhub C658/C558/C458/C368/C308/C258
When printing quality has deteriorated
5
5.2
5.2 When printing quality has deteriorated
5.2.1 Cleaning the Print Head Glass
Printing quality deteriorates if the Print Head Glass is dirty. If this occurs, clean the Print Head Glass ac-
cording to the following procedure.
1 Open the Lower Front Door or Front Door of the machine.
2 Release the Waste Toner Box Lock Lever, then remove the
Waste Toner Box.
3 Remove the Printhead Cleaner from the Lower Front Door
or Front Door of this machine.
bizhub C658/C558/C458/C368/C308/C258 5-7
5.2 When printing quality has deteriorated
5
4 Slowly insert the Printhead Cleaner all the way to the back
end of the Print Head Glass section, and then slowly pull it
out.
% Repeat this operation approximately three times for all of
the Print Head Glass sections.
5 Mount the Printhead Cleaner onto the Lower Front Door or Front Door of this machine.
6 Install the Waste Toner Box.
7 Close the Lower Front Door or Front Door of the machine.
5-8 bizhub C658/C558/C458/C368/C308/C258
When the machine cannot be powered on
5
5.3
5.3 When the machine cannot be powered on
This machine has two power sources. Check the Main Power Switch and the Power key for the status.
- Check whether the power plug of this machine is firmly plugged into the power outlet. Also check that
the breaker has not tripped.
- Check to see that the Main Power Switch and the Power key are turned ON.
In case the machine cannot be powered on even after checking, contact your service representative.
bizhub C658/C558/C458/C368/C308/C258 5-9
5.4 When the Touch Panel is not visible
5
5.4 When the Touch Panel is not visible
If a certain length of time has elapsed without any operations being carried out on this machine, the Touch
Panel may turn off.
Check the following items:
- Tap [Accessibility] and select [Brightness Adjustment], and select [Low] or [High] to adjust the contrast
for the Touch Panel.
- Touch the Touch Panel. In Power Save (Low Power/Sleep) mode, this machine returns from Power
Save mode when the Touch Panel is touched or a key on the Control Panel is pressed, and the Touch
Panel appears normally.
- On the Control Panel, press the Power key. If the Weekly Timer setting has put the machine in Erp
Auto Power OFF mode, press the Power key to display the Touch Panel. To use it outside the preset
operating hours, follow the on-screen instructions.
- Check to see that the Main Power Switch and the Power key are turned ON.
In case the Touch Panel does not appear even after checking it, contact your service representative.
5-10 bizhub C658/C558/C458/C368/C308/C258
When a message appears to replace consumables or carry out cleaning
5
5.5
5.5 When a message appears to replace consumables or carry out
cleaning
When staples in the finisher have run out
When staples in the Finisher have run out, a message appears to prompt you to make replenish them.
Take action while referring to the label inside the machine.
dReference
For details on how to replace a staple cartridge when [Replace the Staple Cartridge.] is displayed, refer to
page 5-20.
For details on how to replace a saddle staple cartridge when [Replace the Saddle Staple Cartridge 1 or 2.] is
displayed, refer to page 5-23.
bizhub C658/C558/C458/C368/C308/C258 5-11
5.5 When a message appears to replace consumables or carry out cleaning
5
When the punch scrap box is full
When the punch scrap box is full, a message appears to prompt you to dispose of the punch scraps (at re-
placement by user).
Take action while referring to the label inside the machine.
When toner is running out in the Toner Cartridge
When it is almost time to replace a Toner Cartridge, an advanced warning message appears. Prepare a re-
placement Toner Cartridge based on the maintenance contract.
5-12 bizhub C658/C558/C458/C368/C308/C258
When a message appears to replace consumables or carry out cleaning
5
5.5
When it is time to replace a Toner Cartridge
When it is time to replace a Toner Cartridge, a replacement prompt message appears. Replace it based on
the maintenance contract. Tap [Start Guidance] to display the replacement procedure on the screen and
check it.
Tips
- Do not replace a Toner Cartridge of a color that is not displayed.
- When it is time to replace a Toner Cartridge of a color other than black, printing can be forcibly con-
tinued using black. Tap [Continue], and then select a desired print job.
When it is time to replace a Drum Unit
When it is time to replace a Drum Unit, a replacement prompt message appears. Replace it based on the
maintenance contract. Tap [Start Guidance] to display the replacement procedure on the screen and check it.
NOTICE
A Drum Unit must not be replaced before the relevant message appears.
Tips
- By the factory default status, this message is displayed only in some area.
- The settings by the service representative are required to display a message about Drum Unit. For de-
tails, contact your service representative.
- Do not replace a Drum Unit of a color that is not displayed.
- When it is time to replace a Drum Unit of a color other than black, printing can be forcibly continued
using black. Tap [Continue], and then select a desired print job.
bizhub C658/C558/C458/C368/C308/C258 5-13
5.5 When a message appears to replace consumables or carry out cleaning
5
When it is time to replace a Developing Unit
When it is time to replace a Developing Unit, a message appears to prompt you to contact your service rep-
resentative. If the message appears, contact your service representative.
Tips
- By the factory default status, this message is displayed only in some area.
- The settings by the service representative are required to display a message about Developing Unit.
For details, contact your service representative.
- When it is time to replace a Developing Unit of a color other than black, printing can be forcibly con-
tinued using black. Tap [Continue], and then select a desired print job.
When a Waste Toner Box is full
When the Waste Toner Box is full, a message appears to prompt you to replace it (at replacement by user).
Tap [Start Guidance], then follow the displayed guidance to take an action.
5-14 bizhub C658/C558/C458/C368/C308/C258
When a message appears to replace consumables or carry out cleaning
5
5.5
5.5.1 Replacing a Toner Cartridge
bizhub C658/C558/C458
The following example shows how to replace a Yellow Toner Cartridge.
Tips
- Shake a new Toner Cartridge well, approximately 5 to 10 times, before installing it.
- If a Toner Cartridge other than for black is empty, printing can be continued forcibly using black. Tap
[Continue], and then select a desired print job.
- Do not forcedly open or disassemble a Toner Cartridge (toner container).
- Do not forcedly remove or dispose of toner that remains in a Toner Cartridge (toner container).
NOTICE
Install a Toner Cartridge for each label color. If you try to forcibly install a Toner Cartridge in the incorrect
position, it may result in a failure.
7WARNING
- Do not throw toner or a container that contains toner (e.g., toner cartridge, developing unit and Waste
Toner Box) into an open flame. The hot toner may scatter and cause burns or other damage.
7CAUTION
- Do not leave toner-related parts (e.g., toner cartridge, developing unit and Waste Toner Box) within easy
reach of children. Licking any of these parts or ingesting toner could damage your health.
- Do not store toner-related parts (e.g., toner cartridge, developing unit and Waste Toner Box) near de-
vices susceptible to magnetism, such as precision equipment and data storage devices, otherwise they
may malfunction. They could cause these products to malfunction.
- Do not force open the toner-related parts (e.g., toner cartridge, developing unit and Waste Toner Box).
If toner tumbles from the toner bottle, take utmost care to avoid inhaling it or even getting skin contact.
- If toner lands on your skin or clothing, wash thoroughly with soap and water.
- If you inhale toner, move to a place with fresh air and gargle with a lot of water repeatedly. Should you
get symptoms such as coughing, seek medical advice.
- If you get toner into your eyes, immediately rinse them with running water for over 15 minutes. Seek
medical advice if irritation persists.
- If you swallow toner, rinse out your mouth and drink a few glasses of water. Seek medical advice if nec-
essary.
bizhub C658/C558/C458/C368/C308/C258 5-15
5.5 When a message appears to replace consumables or carry out cleaning
5
bizhub C368/C308/C258
The following example shows how to replace a Yellow Toner Cartridge.
Tips
- Shake a new Toner Cartridge well, approximately 5 to 10 times, before installing it.
- If a Toner Cartridge other than for black is empty, printing can be continued forcibly using black. Tap
[Continue], and then select a desired print job.
- Do not forcedly open or disassemble a Toner Cartridge (toner container).
- Do not forcedly remove or dispose of toner that remains in a Toner Cartridge (toner container).
NOTICE
Install a Toner Cartridge for each label color. If you try to forcibly install a Toner Cartridge in the incorrect
position, it may result in a failure.
7WARNING
- Do not throw toner or a container that contains toner (e.g., toner cartridge, developing unit and Waste
Toner Box) into an open flame. The hot toner may scatter and cause burns or other damage.
7CAUTION
- Do not leave toner-related parts (e.g., toner cartridge, developing unit and Waste Toner Box) within easy
reach of children. Licking any of these parts or ingesting toner could damage your health.
- Do not store toner-related parts (e.g., toner cartridge, developing unit and Waste Toner Box) near de-
vices susceptible to magnetism, such as precision equipment and data storage devices, otherwise they
may malfunction. They could cause these products to malfunction.
- Do not force open the toner-related parts (e.g., toner cartridge, developing unit and Waste Toner Box).
If toner tumbles from the toner bottle, take utmost care to avoid inhaling it or even getting skin contact.
- If toner lands on your skin or clothing, wash thoroughly with soap and water.
- If you inhale toner, move to a place with fresh air and gargle with a lot of water repeatedly. Should you
get symptoms such as coughing, seek medical advice.
- If you get toner into your eyes, immediately rinse them with running water for over 15 minutes. Seek
medical advice if irritation persists.
- If you swallow toner, rinse out your mouth and drink a few glasses of water. Seek medical advice if nec-
essary.
1
2
3
4
5-16 bizhub C658/C558/C458/C368/C308/C258
When a message appears to replace consumables or carry out cleaning
5
5.5
5.5.2 Replacing a Waste Toner Box
bizhub C658/C558/C458
Tips
- After removing the Waste Toner Box, quickly install the cap. If the Waste Toner Box is tilted, waste
toner may spill.
- Your service representative will collect your used Waste Toner Box. Place a cap on it, put it in a plastic
bag, and store it in a box by itself.
7WARNING
- Do not throw toner or a container that contains toner (e.g., toner cartridge, developing unit and Waste
Toner Box) into an open flame. The hot toner may scatter and cause burns or other damage.
7CAUTION
- Do not leave toner-related parts (e.g., toner cartridge, developing unit and Waste Toner Box) within easy
reach of children. Licking any of these parts or ingesting toner could damage your health.
- Do not store toner-related parts (e.g., toner cartridge, developing unit and Waste Toner Box) near de-
vices susceptible to magnetism, such as precision equipment and data storage devices, otherwise they
may malfunction. They could cause these products to malfunction.
- Do not force open the toner-related parts (e.g., toner cartridge, developing unit and Waste Toner Box).
If toner tumbles from the toner bottle, take utmost care to avoid inhaling it or even getting skin contact.
- If toner lands on your skin or clothing, wash thoroughly with soap and water.
- If you inhale toner, move to a place with fresh air and gargle with a lot of water repeatedly. Should you
get symptoms such as coughing, seek medical advice.
- If you get toner into your eyes, immediately rinse them with running water for over 15 minutes. Seek
medical advice if irritation persists.
- If you swallow toner, rinse out your mouth and drink a few glasses of water. Seek medical advice if nec-
essary.
1
2 3
4
New waste
toner box
Used waste
toner box
bizhub C658/C558/C458/C368/C308/C258 5-17
5.5 When a message appears to replace consumables or carry out cleaning
5
bizhub C368/C308/C258
Tips
- After removing the Waste Toner Box, quickly install the cap. If the Waste Toner Box is tilted, waste
toner may spill.
- Your service representative will collect your used Waste Toner Box. Place a cap on it, put it in a plastic
bag, and store it in a box by itself.
7WARNING
- Do not throw toner or a container that contains toner (e.g., toner cartridge, developing unit and Waste
Toner Box) into an open flame. The hot toner may scatter and cause burns or other damage.
7CAUTION
- Do not leave toner-related parts (e.g., toner cartridge, developing unit and Waste Toner Box) within easy
reach of children. Licking any of these parts or ingesting toner could damage your health.
- Do not store toner-related parts (e.g., toner cartridge, developing unit and Waste Toner Box) near de-
vices susceptible to magnetism, such as precision equipment and data storage devices, otherwise they
may malfunction. They could cause these products to malfunction.
- Do not force open the toner-related parts (e.g., toner cartridge, developing unit and Waste Toner Box).
If toner tumbles from the toner bottle, take utmost care to avoid inhaling it or even getting skin contact.
- If toner lands on your skin or clothing, wash thoroughly with soap and water.
- If you inhale toner, move to a place with fresh air and gargle with a lot of water repeatedly. Should you
get symptoms such as coughing, seek medical advice.
- If you get toner into your eyes, immediately rinse them with running water for over 15 minutes. Seek
medical advice if irritation persists.
- If you swallow toner, rinse out your mouth and drink a few glasses of water. Seek medical advice if nec-
essary.
New waste
toner box
Used waste
toner box
5-18 bizhub C658/C558/C458/C368/C308/C258
When a message appears to replace consumables or carry out cleaning
5
5.5
5.5.3 Replacing a Drum Unit
bizhub C658/C558/C458
Tips
- Your service representative will collect your used Drum Unit. Put it in a black plastic bag and store it
in a box by itself.
- A Drum Unit may be damaged due to exposure to light. Do not take a Drum Unit out of a black plastic
bag until just before it is to installed.
- If a Drum Unit other than for black has reached the replacement time, printing can be continued forcibly
using black. Tap [Continue], and then select a desired print job.
- After replacing a Drum Unit, be sure to clean the Print Head Glass for each color. For details on how
to clean the Print Head Glass, refer to page 5-6.
Unpacking the drum unit
bizhub C658/C558/C458/C368/C308/C258 5-19
5.5 When a message appears to replace consumables or carry out cleaning
5
bizhub C368/C308/C258
Tips
- Your service representative will collect your used Drum Unit. Put it in a black plastic bag and store it
in a box by itself.
- A Drum Unit may be damaged due to exposure to light. Do not take a Drum Unit out of a black plastic
bag until just before it is to installed.
- If a Drum Unit other than for black has reached the replacement time, printing can be continued forcibly
using black. Tap [Continue], and then select a desired print job.
- After replacing a Drum Unit, be sure to clean the Print Head Glass for each color. For details on how
to clean the Print Head Glass, refer to page 5-6.
Unpacking the drum unit
5-20 bizhub C658/C558/C458/C368/C308/C258
When a message appears to replace consumables or carry out cleaning
5
5.5
5.5.4 Replacing a Staple Cartridge
Finisher FS-537/Finisher FS-537 SD
Tips
- The figure shows the Finisher FS-537 SD equipped with Punch Kit PK-523, Z Folding Unit ZU-609,
and Relay Unit RU-513.
- Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no
sheets will be stapled.
NOTICE
Be sure to replace the Staple Cartridge after the relevant message has appeared. If a Staple Cartridge is
removed before the relevant message appears, it may result in a failure.
bizhub C658/C558/C458/C368/C308/C258 5-21
5.5 When a message appears to replace consumables or carry out cleaning
5
Finisher FS-536/Finisher FS-536 SD/Finisher FS-534/Finisher FS-534 SD
Tips
- The figure shows the Finisher FS-534 SD equipped with Punch Kit PK-520 and Relay Unit RU-513.
- Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no
sheets will be stapled.
NOTICE
Be sure to replace the Staple Cartridge after the relevant message has appeared. If a Staple Cartridge is
removed before the relevant message appears, it may result in a failure.
5-22 bizhub C658/C558/C458/C368/C308/C258
When a message appears to replace consumables or carry out cleaning
5
5.5
Finisher FS-533
Tips
- The figure shows the Finisher FS-533 equipped with Punch Kit PK-519.
- Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no
sheets will be stapled.
NOTICE
Be sure to replace the Staple Cartridge after the relevant message has appeared. If a Staple Cartridge is
removed before the relevant message appears, it may result in a failure.
bizhub C658/C558/C458/C368/C308/C258 5-23
5.5 When a message appears to replace consumables or carry out cleaning
5
5.5.5 Replacing a Saddle Staple Cartridge
Finisher FS-537 SD
Tips
- The figure shows the Finisher FS-537 SD equipped with Punch Kit PK-523, Z Folding Unit ZU-609,
and Relay Unit RU-513.
- Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no
sheets will be stapled.
NOTICE
When moving the Saddle Stitcher, be sure to only hold the handle. Otherwise, your hand or finger may get
caught in the machine.
Be sure to replace the Saddle Staple Cartridge after the relevant message has appeared. If a Saddle Staple
Cartridge is removed before the relevant message appears, it may result in a failure.
Saddle Stitcher
Saddle Staple
Saddle Staple
Cartridge 2
Cartridge 1
5-24 bizhub C658/C558/C458/C368/C308/C258
When a message appears to replace consumables or carry out cleaning
5
5.5
Finisher FS-536 SD/Finisher FS-534 SD
Tips
- The figure shows the Finisher FS-534 SD equipped with Punch Kit PK-520 and Relay Unit RU-513.
- Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no
sheets will be stapled.
NOTICE
When moving the Saddle Stitcher, be sure to only hold the handle. Otherwise, your hand or finger may get
caught in the machine.
Be sure to replace the Saddle Staple Cartridge after the relevant message has appeared. If a Saddle Staple
Cartridge is removed before the relevant message appears, it may result in a failure.
Saddle Stitcher
Saddle Staple
Saddle Staple
Cartridge 2
Cartridge 1
6
Index
bizhub C658/C558/C458/C368/C308/C258 6-3
6
6Index
A
Address Book 3-51
Advanced Functions 4-3
C
Control Panel 2-32
Copy function
3-48
D
Dialing Method 3-40
E
E-mail TX 3-31
Entering Characters
2-40
ErP Auto Power OFF 2-31
F
Fax TX 3-38
G
Group 3-60
Guidance function 3-72
I
Installing the fax driver 3-46
Installing the printer driver
3-5, 3-10
i-Option 4-4
J
Job 2-41
K
Keypad 2-39
L
License Management Server (LMS) 4-6, 4-13
Loading Paper
2-42, 2-44, 2-45, 2-46
Low Power mode
2-31
M
Main Menu 2-34
MFP 2-16, 2-18
Multi-job
2-41
O
Options 2-8, 2-12, 2-20
P
PC-Fax TX 3-43
PCL
3-6
Power Save mode 2-31
Print Function 3-3, 3-6
Printing from a USB memory device
3-65
PS 3-6
Q
Quick Security 3-77
R
Request Code 4-6
S
Safety information 1-6
Saving the scanned data
3-67
Search 3-62
Sender Fax No. Settings 3-40
Sender settings
3-40
Sleep mode 2-31
Slide Menu 2-35
SMB Send
3-14, 3-22
Sub Power OFF 2-30
T
Token Certificate 4-5
Touch Panel
2-34, 2-36
U
User authentication 3-50
W
Web Browser 4-11
6-4 bizhub C658/C558/C458/C368/C308/C258
6
199


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konica Minolta Bizhub C308 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konica Minolta Bizhub C308 in the language / languages: English as an attachment in your email.

The manual is 26,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Konica Minolta Bizhub C308

Konica Minolta Bizhub C308 User Manual - German - 224 pages

Konica Minolta Bizhub C308 User Manual - Dutch - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info