Manual Kona 2014 (page 38 of 42) (English)

780527

Zoom out

Zoom in

1/42

KONA OWNER’S MANUAL

2. Perspective

Today’s high-performance bicycles require frequent and

careful inspection and service. In this Appendix we try

to explain some underlying material science basics and

how they relate to your bicycle. We discuss some of the

trade-offs made in designing your bicycle and what you

can expect from your bicycle; and we provide important,

basic guidelines on how to maintain and inspect it. We

cannot teach you everything you need to know to prop-

erly inspect and service your bicycle; and that is why we

repeatedly urge you to take your bicycle to your dealer for

professional care and attention.

WARNING: Frequent inspection of your bike is

important to your safety. Follow the Mechanical Safety

Check in Section 1.C of this Manual before every ride.

Periodic, more detailed inspection of your bicycle is

important. How often this more detailed inspection is

needed depends upon you. You, the rider/owner, have

control and knowledge of how often you use your bike,

how hard you use it and where you use it. Because

your dealer cannot track your use, you must take re-

sponsibility for periodically bringing your bike to your

dealer for inspection and service. Your dealer will help

you decide what frequency of inspection and service is

appropriate for how and where you use your bike. For

your safety, understanding and communication with

your dealer, we urge you to read this Appendix in its

entirety. The materials used to make your bike deter-

mine how and how frequently to inspect. Ignoring this

WARNING can lead to frame, fork or other component

failure, which can result in serious injury or death.

A) UNDERSTANDING METALS

Steel is the traditional material for building bicycle frames.

It has good characteristics, but in high performance

bicycles, steel has been largely replaced by aluminum

and some titanium. The main factor driving this change is

interest by cycling enthusiasts in lighter bicycles.

Properties of Metals

Please understand that there is no simple statement that

can be made that characterizes the use of different met-

als for bicycles. What is true is how the metal chosen is

applied is much more important than the material alone.

One must look at the way the bike is designed, tested,

manufactured, supported along with the characteristics of

the metal rather than seeking a simplistic answer.

Metals vary widely in their resistance to corrosion. Steel

must be protected or rust will attack it. Aluminum and

Titanium quickly develop an oxide lm that protects the

metal from further corrosion. Both are therefore quite

resistant to corrosion. Aluminum is not perfectly corro-

sion resistant, and particular care must be used where it

contacts other metals and galvanic corrosion can occur.

Metals are comparatively ductile. Ductile means bending,

buckling and stretching before breaking. Generally speaking,

of the common bicycle frame building materials steel is the

most ductile, titanium less ductile, followed by aluminum

Metals vary in density. Density is weight per unit of mate-

rial. Steel weighs 7.8 grams/cm3 (grams per cubic cen-

timeter), titanium 4.5 grams/cm3, aluminum 2.75 grams/

cm3. Contrast these numbers with carbon ber composite

at 1.45 grams/cm3.

Metals are subject to fatigue. With enough cycles of use,

at high enough loads, metals will eventually develop

cracks that lead to failure. It is very important that you

read The basics of metal fatigue below.

Let’s say you hit a curb, ditch, rock, car, another cyclist or

other object. At any speed above a fast walk, your body

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kona 2014 in the language / languages: English as an attachment in your email.

The manual is 2.34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kona 2014 Manual

Product: