780527
16
Zoom out
Zoom in
Previous page
1/42
Next page
KONA OWNER’S MANUAL
15
WARNING: An insufciently tightened stem binder
bolt, handlebar binder bolt or bar end extension clamping
bolt may compromise steering action, which could cause
you to lose control and fall. Place the front wheel of
the bicycle between your legs and attempt to twist the
handlebar/stem assembly. If you can twist the stem in
relation to the front wheel, turn the handlebars in relation
to the stem, or turn the bar end extensions in relation to
the handlebar, the bolts are insufciently tightened.
D) CONTROL POSTION ADJUSTMENTS
The angle of the controls and their position on the
handlebars can be changed. Ask your dealer to make the
adjustments for you. If you choose to make your own
control lever angle adjustment, be sure to re-tighten the
clamp fasteners to the recommended torque
(see the
manufacturer’s instructions)
.
E) BRAKE REACH
Many bikes have brake levers which can be adjusted
for reach. If you have small hands or nd it difcult to
squeeze the brake levers, your dealer can either adjust
the reach or t shorter reach brake levers.
WARNING: The shorter the brake lever reach, the more
critical it is to have correctly adjusted brakes, so that
full braking power can be applied within available
brake lever travel. Brake lever travel insufcient to
apply full braking power can result in loss of control,
which may result in serious injury or death.
4. TECHNICAL INFORMATION
It’s important to your safety, performance and enjoyment
to understand how things work on your bicycle. We urge
you to ask your dealer how to do the things described in
this section before you attempt them yourself, and that you
have your dealer check your work before you ride the bike.
If you have even the slightest doubt as to whether you
understand something in this section of the Manual,
talk to your dealer.
See also Appendix B [p.35]. See also
Appendix A and C.
A. Wheels
Bicycle wheels are designed to be removable for easier
transportation and for repair of a tire puncture. In most
cases, the wheel axles are inserted into slots, called
“dropouts” in the fork and frame, but some suspension
mountain bikes use what is called a “through axle” wheel
mounting system.
If you have a mountain bike equipped with through
axle front or rear wheels, make sure that your dealer
has given you the manufacturer’s instructions, and
follow those when installing or removing a through
axle wheel. If you don’t know what a through axle is,
ask your dealer.
Wheels are secured in one of three ways:
• A hollow axle with a shaft (“skewer”) running through it
which has an adjustable tension nut on one end and
an over-center cam on the other (cam action system,
g.8 a & b)
14
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kona 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kona 2014 in the language / languages: English as an attachment in your email.

The manual is 2.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info