576597
46
Zoom out
Zoom in
Previous page
1/51
Next page
43
UK 8 A1
GB
Assembly
NOTE
Mount the camera so that it can be reached without aid. The
same applies to the connecting cables. These should ideally
be laid in plastic or metal ducting.
The camera is not suitable for ceiling mounting as the image
can not be rotated.
CAUTION
When selecting a mounting location for the camera, ensure
that it is not subjected to direct sunlight, vibrations, moisture,
dust, heat or cold.
Using the wall bracket as a template, mark the positions for the
drill holes on the wall.
Drill three holes (ø 6 mm) and insert the wall plugs supplied.
When drilling, ensure that you do not inadvertently damage
power, gas or water lines.
Screw the wall bracket to the wall using the supplied screws.
Setting the camera position
Loosen the locking screw and the knurled nut on the wall
bracket and align the camera accordingly.
Re-tighten the locking screw and the knurled nut .
Connecting the camera
The camera has a connecting cable with two cinch sockets +
and a low voltage socket .
Connect the camera to the corresponding connections
to
on the extension cable .
Connect the cinch plugs + (video and audio) on the extension
cable to the audio and video inputs of your display device
(e.g. a monitor). If you require audio transmission, the audio con-
nection can be left open.
IB_101136_UK8A1_LB1.indb 43 02.07.14 09:17
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kompernass UK 8 A1 - IAN 101136 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kompernass UK 8 A1 - IAN 101136 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info