625968
184
Zoom out
Zoom in
Previous page
1/226
Next page
MAINTENANCE PROCEDURES
182
4.9.1.h CHANGING THE RUBBER TRACKS
WARNING
q This operation must be carried out by two persons. One operator must be seated in the cab and
manoeuvre the machine following the signals of the other operator who carries out the change and the
adjustment.
q The track must be changed with the frame raised from the ground; be careful not to shift any control
lever while the operator is working.
q During the change do not remove any component apart from the track.
q If the track tension cannot be reduced by means of the procedure described above, contact your
Komatsu Dealer for the necessary repairs.
IMPORTANT
q It is possible to switch over from rubber to steel tracks. In any case, it is necessary to remove and adjust
the shock absorber of the idler roller. This operation can be performed only by specialized personnel at
any Komatsu Dealer.
REMOVING THE RUBBER TRACK
DANGER
q The grease contained in the hydraulic cylinder is
pressurized. For this reason, do not give the grease valve
(1) more than one turn when loosening it; in fact, if the
valve is loosened excessively it may be pushed out due to
the grease pressure and this is very dangerous for the
operator..
Do not loose any component apart from the valve (1). If the
track tension does not decrease after this operation,
contact your Komatsu Dealer.
q It is extremely dangerous to let the grease out following
any procedure different from the one indicated below.
q When installing or removing the tracks, before turning the
sprocket make sure that the grease contained in the
cylinder has been removed.
WARNING
q If the resistance met when injecting the grease is
excessive, move the machine forward and backward
covering a short distance.
184


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Komatsu Galeo PC14R-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Komatsu Galeo PC14R-2 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info