625968
180
Zoom out
Zoom in
Previous page
1/226
Next page
MAINTENANCE PROCEDURES
178
To reduce the track tension, proceed as follows:
DANGER
q It is extremely dangerous to let the grease out following any procedure different from those illustrated
below.
q If the track tension cannot be reduced with this operation, contact your Komatsu Dealer, who will
provide for the necessary repairs.
1. Gradually loosen the grease valve (1) to let the grease out;
do not give the valve more than one turn.
2. If the grease does not come out smoothly, move the machine
slowly forward and backward covering a short distance.
3. Tighten the valve and remove any trace of grease.
4. Move the machine forward and backward, then stop it and
make sure that the track tension is correct.
IMPORTANT
q The degree of wear of pins and bushings varies depending
on the work conditions and on the characteristics of the
ground.
It is therefore necessary to check the track tension
frequently, in order to ensure that it is always correct.
q When working on rocky or very irregular surfaces, increase the track tension in order to prevent stones
or debris to get stuck between the tracks and the sprocket; on the other hand, reduce the track tension
when working on soft or muddy ground, since the soil penetrates between rollers and tracks and tends
to increase the tension.
4.9.1.f CHECKING THE RUBBER TRACKS
Change the rubber tracks when they reach the indicated wear limits.
1. When the height “A” of the rubber claw is less than 5 mm: in
this case, in fact, the track may slip and its traction force be
reduced..
1- Roller
2- Rubber track
2. When the steel core is visible in two or more points of the
track.
RWA06560
A
1
2
RYA07510
180


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Komatsu Galeo PC14R-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Komatsu Galeo PC14R-2 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info