625968
123
Zoom out
Zoom in
Previous page
1/226
Next page
USE OF THE MACHINE AND RELATED CONTROLS
121
3.3.13 OPERATIONS THAT CAN BE PERFORMED WITH THE HYDRAULIC
EXCAVATOR
In addition to those indicated below, many other applications are possible, thanks to the use of various
attachments.
EXCAVATION
When the machine is in the position shown in the diagram on the
right, the maximum digging force and thrusting force of the single
cylinders is obtained when the bucket cylinder and the relevant
articulation, the arm cylinder and the arm are at 90° with respect
to each other.
During digging operations, keep this amplitude to increase the
efficiency of the machine.
The positions available for digging with the arm range from a 45°
angle away from the machine to a 30° angle towards the
machine.
There may be some differences depending on the digging depth,
but it is advisable to try to keep within the above range rather than
operate with the cylinders reaching the end of stroke.
SIDE DITCHING
Ditch digging operations can be performed effectively by installing
a bucket suitable for digging ditches and positioning the tracks
parallel to the line that delimits the edge of the ditch.
o dig wide ditches, excavate the sides first and successively the
central part.
LOADING THE MACHINE
In places where the rotation angle is reduced, the effectiveness of
the operation can be increased by positioning the truck so that the
operator can comfortably see it.
The loading operation is easier and the loading capacity greater if
the hydraulic excavator works from the back and not from the
sides of the truck.
RKA16280
RYA17720
RYA02550
RYA02560
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Komatsu Galeo PC14R-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Komatsu Galeo PC14R-2 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info