625968
120
Zoom out
Zoom in
Previous page
1/226
Next page
USE OF THE MACHINE AND RELATED CONTROLS
118
3.3.11 PRECAUTIONS TO BE TAKEN WHEN TRAVELLING ON SLOPES
WARNING
q Swinging or using the work equipment on slopes may
cause the machine to lose stability and overturn, therefore
it is advisable to avoid these operations. It is particularly
dangerous to swing the turret when the machine is
travelling downhill with full bucket. If these operations
cannot be avoided, create a sort of platform by heaping
some ground, so that the machine can work in horizontal
position.
q Do not travel up or down steep slopes, since the machine
may overturn.
q During travel, lift the machine at about 20-30 cm from the
ground. Do not travel downhill in reverse.
q Do not steer or move transversally on slopes. Always
position the machine on a level surface before changing
direction. This may take longer, but is certainly safer.
q Always operate the machine or travel in such a way as to
be able to stop it safely at any time if it slips or becomes
unstable.
q When travelling uphill, if the tracks slip or it is impossible
to move the machine using only the force of the tracks, do
not use the pulling force of the arm to help the machine
move forward. The machine runs the risk of overturning.
q Avoid adjusting the track gauge when the machine is
working on a slope: the machine may lose stability and
overturn.
1. When travelling downhill on steep slopes, lower the speed
using the travel levers and the hand accelerator.
When moving downwards on a slope whose inclination
exceeds 15°, position the work equipment as indicated in the
diagram on the right and reduce the engine speed.
NOTE
q When the machine travels downhill, the sprocket (1) must be
facing downhill.
If the machine travels downhill with the sprocket (1) positioned
uphill, the tracks tend to slacken and this may cause the
machine to slip.
RYA00560
RYA00550
1
RYA17680
20 ~ 30 cm
1
RYA17690
120


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Komatsu Galeo PC14R-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Komatsu Galeo PC14R-2 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info