625968

Komatsu Galeo PC14R-2 Manual

115
Zoom out
Zoom in
Previous page
1/226
Next page
USE OF THE MACHINE AND RELATED CONTROLS
113
q Track gauge adjustment control (version with adjustable track gauge)
WARNING
q Select the narrow track gauge only when the machine must travel in small spaces. For normal
applications and digging operations, always select the wide track gauge.
q Adjusting the track gauge on slopes is dangerous, since this may affect the lateral stability of the
machine. Therefore, it is advisable to adjust the track gauge on level surfaces.
q When the track gauge is narrowed completely, also the lateral stability of the machine is reduced. In
work sites where the machine runs the risk of overturning, widen the track gauge and pay the utmost
attention during travel.
q Before using the blade/adjustable track gauge lever, check the position of the switch.
q Set the blade/adjustable track gauge switch to the track gauge
adjustment position.
To adjust the track gauge, shift the lever positioned to the right
of the operator seat forward or backward.
IMPORTANT
q If there are obstacles that prevent the adjustment of the
track gauge, remove them or place the machine on a level
surface, in order to be able to find the correct position for
the adjustment.
q If the tracks are dirty with mud, clean them thoroughly
before adjusting the track gauge.
q On machines with adjustable track gauge it is possible to modify
the blade width to adapt it to the track gauge; two blade
configurations are available.
A – Narrow blade
B – Wide blade
This operation must be carried out on a level surface, with the
equipment resting on the ground and after stopping the engine.
To modify the blade width, remove the pins (1) and the
extensions (2).
Put back the extensions, inverting their position (the right one
on the left side and the left one on the right side, as shown in
the figure).
RKA16670
A
RKA16660
B
… 115 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Komatsu Galeo PC14R-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Komatsu Galeo PC14R-2 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info