625968
103
Zoom out
Zoom in
Previous page
1/226
Next page
USE OF THE MACHINE AND RELATED CONTROLS
101
3.3.3.2 WARMING-UP OPERATIONS
IMPORTANT
q Do not carry out any operation and do not shift the levers suddenly when the hydraulic oil temperature
is too low. Always carry out the warming up operations. This will lengthen the life of the machine.
q Do not accelerate abruptly before completing the warming-up operations. Do not let the engine run at
low idling or high idling speed for more than 20 minutes without interruption. If it is necessary to let the
engine idle, accelerate every now and then or increase the speed up to an intermediate value.
After starting the engine, let it warm up before starting work. Carry
out the operations and checks indicated below.
1. Shift the accelerator lever (1) from the idling (A) to the
intermediate speed position (B), and let the engine idle at
medium speed for at least 5 minutes.
NOTE
q When the ambient temperature is below 0°C, let the engine run
at low idling speed during the warming-up operations.
q Do not accelerate completely or abruptly until the coolant
temperature has reached at least 60°C.
2. Set the safety lever (2) to the “free” position and raise the
bucket from the ground.
RKA16470
RKA16380
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Komatsu Galeo PC14R-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Komatsu Galeo PC14R-2 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info