625968
95
Zoom out
Zoom in
Previous page
1/226
Next page
USE OF THE MACHINE AND RELATED CONTROLS
93
SEAT BELT
WARNING
q Before fastening the seat belt, make sure that the fastening brackets or the belt itself do not show any
anomaly. If there are damaged or worn parts, change the belt.
q In any case, change the seat belt every 3 years, even if it seems to be in good conditions. The date of
manufacture is indicated on the reverse side of the belt.
q Adjust and fasten the seat belt before operating the machine.
q Always fasten the seat belt when working with the machine.
q Make sure that none of the two parts of the belt is twisted.
Make sure that the screws that fasten the belt to the frame are not loose. If necessary, apply a tightening torque of
24,5 ± 4,9 Nm (2,5 ± 0,5 kgfm).
If the surface of the belt is damaged or if the couplings are broken or deformed, change the belt assembly.
Fastening and unfastening the seat belt
1. Adjust the seat in such a way as to ensure that there is
sufficient knee room when pressing the pedal thoroughly
while seated, with the back resting against the backrest.
2. After adjusting the seat, seat correctly and insert the tang (2)
in the buckle (1). Pull the belt to make sure that the tang is
securely locked in the buckle.
3. To unfasten the belt, lift the upper part of the buckle (1) and
release it.
Fasten the belt without twisting it. Adjust the belt length by
proceeding as indicated below.
ADJUSTING THE SEAT BELT
How to shorten the belt
Pull the free end of the belt on the tang side.
How to lengthen the belt
Pull the belt, keeping it perpendicular to the tang.
RKA10700
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Komatsu Galeo PC14R-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Komatsu Galeo PC14R-2 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info