583637
6
Zoom out
Zoom in
Previous page
1/7
Next page
Operation
1. Connect the heater to a power socket, then switch the ON/OFF switch on the side panel.
2. Press the buttons on the operation panel or remote control to set the heating.
Setting
Mode
O OFF (Stop)
I 1000W
II 2000W
3. Press the button on the heater, and the machine will go into Standby Mode and
Frost-Free mode.
Press the power button “ ” to set to ECO mode, with displaying at Economic I power, or
alternately “ ” displaying at Comfort II power, or Frost-free mode “ ”.
Flashing means the heater is in ECO mode
Flashing means the heater is at low power
Flashing means the heater is at high power
Flashing means the heater is in frost-free mode
Under heating status, the heating icon “ ” will appear on the LCD screen. Under Frost-free
status, if the ambient temperature is higher than 5°C, then the heating icon will disappear.
Setting Temperature
The temperature can only be set under Comfortable or Economical mode. Under ECO and Frost-
free modes, the set temperature is fixed to 18°C and 5°C respectively. Press the temperature
button “ ”, then use the UP/DOWN buttons “ ” to set the temperature between 15°C to
50°C. The setting will be memorized and confirmed after 10 seconds.
When the ambient temperature is equal to the preset temperature, the power will switch
from Comfortable mode to Economical mode automatically.
When the ambient temperature is 2°C higher than the preset temperature, the heater will
stop heating.
When the ambient temperature is 2°C lower than the preset temperature, the heater will
switch to Comfortable mode again.
Note: the set temperature must be set to a temperature higher than the ambient temperature,
otherwise the unit will not function.
Timer Setting
Press the Timer Button “ ”, then use the UP/DOWN buttons “ ” to set the timer from
0~24 hours. When the timer status is active, the “ ” timer symbol will flash. The setting will be
memorized and confirmed after 10 seconds.
If the timer is set under standby status, it will function to switch the heater ON.
If the timer is set while the heater is running, it will function to switch the heater OFF.
For example, if you set the timer to 01:00 under standby status, the heater will switch on after
one hour. If you then set the timer to 01:00 while the heater is operating, it will switch off after
one hour.
These functions may both be achieved using the remote control as well as the control panel.
5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kogan KAHTP20BLKA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kogan KAHTP20BLKA in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info