English – 2Technical dataChargerStandard charger (36–4/230)Compact charger (36–2/100-230)Fast charger (36–6/230)Product codeBCS220BCS230BCS250Rated voltageV~207to26490to264207to264FrequencyHz47to6347to6347to63Battery charging voltageV=363636Charging current (max.)A426A)Charging time– PowerPack 300, approx.hrs2.552– PowerPack 400, approx.hrs3.56.52.5– PowerPack 500, approx.hrs4.57.53Operating temperature°C0to+400to+400to+40Storage temperature°C+10to+40+10to+40+10to+40Weight, approx.kg0.80.61.0Protection ratingIP40IP40IP40A)The charging current is limited to 4A for the PowerPack 300 and for Classic+ Line batteries.The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.OperationStart-upConnecting the charger to the mains (see figure A)uPay attention to the mains voltage. The voltage of thepower source must match the voltage specified on therating plate of the charger. Chargers marked 230 V canalso be operated at 220 V.Plug the device connector (3) of the power cable into thedevice socket (2) on the charger.Connect the power cable (country-specific) to the mains.Charging the removed battery (see figure B)Switch the battery off and remove it from its holder on theeBike. When doing so, read and observe the operating in-structions of the battery.uEnsure the battery is placed on clean surfaces only.Avoid getting dirt, e.g. sand or soil, in the charging socketand contacts in particular.Plug the charging connector (5) of the charger into thesocket (6) on the battery.Charging the battery on the bike (see figures C andD)Switch the battery off. Clean the cover of the chargingsocket (7). Avoid getting dirt, e.g. sand or soil, in the char-ging socket and contacts in particular. Lift the cover of thecharging socket (7) and plug the charging connector (5) intothe charging socket (6).uThere is a risk of fire due to the charger heating upduring charging. Ensure the battery on the bike iscompletely dry and placed on a fireproof surface be-fore charging. If this is not possible, remove the batteryfrom the holder and charge it in a more suitable location.When doing so, read and observe the operating instruc-tions of the battery.Charging process for two batteriesIf two batteries are fitted to an eBike, both batteries can becharged using the uncovered connection. To begin with,both batteries are charged one after the other until theyreach approx.80–90% capacity, then they are both fullycharged at the same time (the LEDs flash on both batteries).When the bike is in operation, power is drawn from both bat-teries on an alternating basis.If you take the batteries out of the holders, you can chargeeach one individually.Charging processThe charging process begins as soon as the charger is con-nected to the battery or charging socket on the bike and tothe mains.Note: The charging process is only possible when the tem-perature of the eBike battery is within the permitted char-ging temperature range.Note: The drive unit is deactivated during the charging pro-cess.The battery can be charged with and without the on-boardcomputer. When charging without the on-board computer,the charging procedure can be observed on the batterycharge indicator.When the on-board computer is connected, a charging noti-fication appears on the display.The state of charge is displayed by the battery charge indic-ator (9) on the battery and by the bars on the on-board com-puter.The LEDs on the battery charge indicator (9) flash during thecharging process. Each solid illuminated LED represents ap-0 275 007 XCX | (13.03.2020)Bosch eBike Systems
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Koga Pace B10 - Bosch Perf Gen3 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Koga Pace B10 - Bosch Perf Gen3 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.
The manual is 13.09 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
