783324
36
Zoom out
Zoom in
Previous page
1/40
Next page
App-controlled Use
Open the HeatsBox App on your smartphone.
Select your HeatsBox and set the parameters such as target tempera-ture, heating process or
timer individually.
If the user is connected to the appliance, the LED control lamp will turn blue.
Start the heating process by selecting the eld on the app that displays the estimated time. The
heating process starts immediately, and the LED control lamp turns red.
If you have set a timer, the HeatsBox will automatically start the heat-ing process after a set
time, but not immediately. You can close the app or disconnect the bluetooth®* connection. The
information is stored directly on the appliance.
Check the current food temperature on your HeatsBox App.
Press the ON/OFF button to turn off the appliance after reaching the desired heating time. The
heating and the power indicator light will turn off. The LED control lamp should now light up
again in blue.
The appliance indicates that the target temperature has been reached by switching the color of
the LED control lamp to green. The device then automatically keeps your food warm at a certain
temperature for a prolonged period.
Allow the appliance to cool down before eating or handling any parts.
Disconnect the power plug and remove the lid.
Enjoy your meal.
User Hints
Evenly distribute the food in the inner dish to ensure quick heating.
For safety reasons, the heating process will stop when the lid is re-moved during use and will
automatically continue once the lid is put back on the appliance. Avoid frequent removal of lid
to check pro-gress for faster heating process.
When the heating lid is removed during a heating process, the power indicator light will start
blinking until the heating lid is put back on the appliance again. Once back on, the power
indicator light will light up normally again.
Small pieces heat faster than larger ones. The estimated heating time of the food may vary
depending on the temperature, quality, amount of contents and the degree of heating desired.
Some experimentation may be needed to determine exact heating times based on personal
preferences.
If the estimated heating time was too short, extend heating time while monitoring closely.
For safety reasons, the appliance stops heating automatically after 60 minutes. If this is not
enough time, press the ON/OFF button to start again. This can be done immediately and
without waiting time after automatic shut off.
To stop the heating process at any time: (1) press the ON/OFF button or (2) unplug the Heats-
Box, (3) remove the lid or use the App (4).
* bluetooth is a registered trademark by Bluetooth SIG, Inc., Kirkland, Washington, United States.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenig GB-B00145-Heatsbox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenig GB-B00145-Heatsbox in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info