Manual Koenic KWM 8122 B INV (page 30 of 50) (English, German)

782844

Zoom out

Zoom in

1/50

English

Size - A5

Installation

Note:

The washing machine is equipped with

power cord and plug and needs sewage and

tap water connections. Before installation,

make sure that a suitable wall outlet is at the

desired place of installation.

Consider the dimensions (chapter Technical

data) of the product for placing and

installation.

Caution

• Before initial operation the transport

restraints must be removed from the

backside of the unit. Operating the

washing machine with mounted transport

restraints leads to serious damages.

• Keep the transport restraints for later

use. Never transport the device without

correctly mounted transport restraints!

Fig. 1Loosen the four transport restraints

with a wrench (13 mm) and unscrew

them completely. Insert the 4 supplied

blind plugs in the holes.

Fig. 2Place the washing machine on an even,

horizontal and steady surface. For

levelling the feet are adjustable and can

be screwed in or out.

• Unscrew the lock nuts with an open-

end wrench (17 mm).

• Turn the feet to the right to screw

them in and to the left to unscrew

them.

• Use a spirit level to check whether

the appliance is levelled. If the

appliance is not standing horizontally

or is tilting the feet must be adjusted

again.

• If the unit is levelled and does not

tilt, tighten the nuts with the open-

end wrench.

Note:

Note the following, when placing the device

on a platform:

The device might move during spinning and

could fall of a platform. To prevent this, the

feet must be secured with retaining tabs

(available in specialized stores).

Fig. 3The washing machine must be

connected to a drain.

• The drain hose is already ﬁxed to the

sewage connection. Pull the hose out

of the clamps and unwind it.

• Connect the other end to the drain

pipe (option A or B). Observe the max.

height of the hose end.

Note:

• To avoid leakage, a hose clamp should be

used to correctly install the outlet hose.

• Suitable hose holders are available as

optional accessories.

Fig. 4Connect the water inlet to the water

system (3/4 “) using the supplied

hose and make sure that everything

is connected correctly and ﬁrmly. The

water pressure must be between

0.05MPa and 1 MPa. A pressure

reducing valve must be used if the

water pressure exceeds 1 MPa. The

correct installation of the water

connection should be checked on a

regular basis.

Note:

• If the water pipes are new or have not

been used for an extended period of time,

allow a certain amount of water to drain

until you are sure that the water is clear

and free of foreign objects.

• If this point is not observed, there is a risk

that the water inlet will become clogged

and the unit will be damaged.

Fig. 5Plug the mains plug into a suitable

socket.

IM_KWM7122B_INV_201118_V10_HR.indb 30IM_KWM7122B_INV_201118_V10_HR.indb 30 18/11/2020 4:19 PM18/11/2020 4:19 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KWM 8122 B INV in the language / languages: English, German as an attachment in your email.

The manual is 2.41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Koenic KWM 8122 B INV Manual

Product: