Manual Koenic KWDR 8632 B INV (page 35 of 39) (English, German)

782842

Zoom out

Zoom in

1/39

English

Cleaning and care

Warning

• When cleaning, never use solvents or

abrasive materials, hard brushes, metallic

or sharp objects. Solvents are harmful to

human health and can attack plastic parts,

while abrasive cleaning mechanisms and

tools may scratch the surface(s).

• Switch o the appliance and let it cool

down completely before cleaning.

• Clean the exterior surfaces of the product

with a slightly damp cloth and dry them

well. Make sure that no water enters the

product interior (e.g. at the switch).

Fig. 11 Cleaning the detergent drawer

• Pull out the drawer. Press the tab

marked with an arrow above the

fabric softener compartment and

pull out the drawer completely.

• Wash the chambers with water.

• If necessary, use a soft brush to

clean the housing.

• Insert the detergent drawer.

Fig. 12 Clean the ﬁlter of the lye pump

Caution

• Never operate the appliance without a

ﬁlter.

• The ﬁlter of the lye pump prevents

foreign objects from entering and possibly

damaging the pumping system.

• Clean or check the ﬁlter regularly

depending on the frequency of use,

approximately once a month.

• Check the ﬁlter if the water is not

pumped out or if the noise is increased

during pumping.

• Before opening the service ﬂap, place

a big cloth in front and below the ﬂap.

Large amounts of water may leak when

removing the ﬁlter.

• Make sure that all water has been

pumped out during the previous

wash cycle, then turn o the power

and unplug the power cord.

• Open the maintenance ﬂap.

• Place a big piece of cloth and a

collecting tray in front of the service

ﬂap to catch any leaking water.

• Turn the ﬁlter cover to the left.

Catch leaking water!

• Clean the ﬁlter under running water

and remove any foreign objects.

• Insert the ﬁlter and turn it to the

right. Make sure that the ﬁlter is

properly ﬁxed so that no water can

leak.

• Close the maintenance ﬂap.

Fig. 13 Clean the inlet ﬁlter

Caution

• Close the water supply!

• After cleaning, always make sure that the

water hose is properly installed and no

water leaks.

Filter at the water tap

Clean the ﬁlter if there is an insucient

ﬂow of water when the water tap is

open.

• Close the water tap.

• Unscrew the supply hose from the

water tap.

• Wash the inlet ﬁlter under running

water.

• Reconnect the supply hose.

Filter at the appliance

Clean the ﬁlter regularly, approximately

every three months.

• Unscrew the supply hose on the

back of the unit.

• Clean the ﬁlter with a small brush.

• Reconnect the supply hose and

ensure it’s properly sealed and

doesn’t leak.

IM_KWDR 8632 B INV_211029_V08_HR.indb 35IM_KWDR 8632 B INV_211029_V08_HR.indb 35 29/10/2021 10:10 AM29/10/2021 10:10 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KWDR 8632 B INV in the language / languages: English, German as an attachment in your email.

The manual is 3.7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Koenic KWDR 8632 B INV Manual

Product: