Manual Koenic KWDR 8632 B INV (page 31 of 39) (English, German)

782842

Zoom out

Zoom in

1/39

English

Start washing and drying

1. Turn on the washer-dryer with the

on / o switch.

2. Use the program selector to select a

suitable program and, if necessary, a

suitable additional function. Please refer to

the following Program table.

3. Use the TEMPERATUR button to change

the temperature of the washing program if

the preset temperature does not meet your

requirements. The higher the temperature

the more energy is consumed. The

drying program is automatically adjusted,

depending on the selected washing

program and no manual changes, e.g. the

temperature, can be made.

4. If necessary use the SCHLEUDERN button

to select a dierent spin speed if the preset

speed does not meet your requirements.

The higher the spin speed, the drier but

also more creased the laundry will be. High

speeds also reduce the life of the washer-

dryer.

Note:

Only use low spin speeds for delicate

garments.

5. By pressing the additional function button

MODUS, select one of the additional

functions, pre-wash, extra rinse

or quick wash , if necessary. Press the

steam button DAMPF to steam the laundry

in the appropriate programs (see markings

on the control panel) to eliminate germs

and odors. The steam is held for 15 to 30

minutes, depending on the program setting

and before the washing program starts.

6. By pressing the TROCKNEN button, select

the drying level. The standard setting is

normal dry . If you press the TROCKNEN

button once, the laundry will be very dry

. If you press it again, you will enter

the time setting mode for the drying time.

The drying time can be set from 0:40 to

3:10h:min in 30 minute steps. If you then

press the TROCKNEN button again, you

will activate the slightly dry setting .

7. Start the washing process by pressing the

start / pause button.

8. Press the timer button ZEITVORWAHL to

set a later time for the machine to start. By

pressing the button several times a start

time of 1 to 24 hours can be set in 1-hour

increments. To do so, follow the steps 1

to6, then use the ZEITVORWAHL button

to set the start time, wait until the display

shows the wash time and then press the

start / pause button. If the preset time has

elapsed, the washer-dryer will automatically

turn on and the washing time will be shown

in the display.

9. You can also create your own program

and save it under program point Mein

Programm (My cycle). Turn the program

selector to your desired program. Set

the required temperature, spin speed

and special functions. Then press the

TEMPERATUR | button for 3 seconds

to save the settings. The program remains

stored and can be changed at any time as

described above.

Caution

The door may only be opened if the

appliance is not running, e.g. after a program

has ﬁnished. Do not try to open the door

while the appliance is running.

Note:

The appliance is equipped with a humidity

sensor to measure the moisture in the drum

or appliance. The residual time for drying is

determined by the weight of the inserted

clothes and the measured moisture.

10. For drying clothes washed elsewhere or

wet clothes chose the program Trocknen

(drying) and start it with the start / pause

button.

IM_KWDR 8632 B INV_211029_V08_HR.indb 31IM_KWDR 8632 B INV_211029_V08_HR.indb 31 29/10/2021 10:10 AM29/10/2021 10:10 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KWDR 8632 B INV in the language / languages: English, German as an attachment in your email.

The manual is 3.7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Koenic KWDR 8632 B INV Manual

Product: