Manual Koenic KWDR 8622 B INV (page 35 of 48) (English, German)

782840

Zoom out

Zoom in

1/48

English

Start washing and drying

1. Turn on the washing machine with the

Ein-/Aus switch.

2. Use the program selector to select a

suitable program and, if necessary, a

suitable additional function. Please refer to

the following Program table.

3. Use the TEMP. button to change the

temperature of the washing program if the

preset temperature does not meet your

requirements. The higher the temperature

the more energy is consumed. The

drying program is automatically adjusted,

depending on the selected washing

program and no manual changes, e.g. the

temperature, can be made.

4. If necessary use the SCHLEUDERN button

to select a dierent spin speed if the preset

speed does not meet your requirements.

The higher the spin speed, the drier but

also more creased the laundry will be. High

speeds also reduce the life of the washing

machine.

Note:

Only use low spin speeds for delicate

garments.

5. By pressing the TROCKENGRAD button,

select the drying level. The standard

setting is normal dry . If you press the

TROCKENGRAD button once, the laundry

will be very dry . If you press it again,

you will enter the time setting mode for

the drying time. The drying time can be set

from 0:40 to 3:10h:min in 30 minute steps.

If you then press the TROCKENGRAD

button again, you will return to the standard

setting.

6. Start the washing process by pressing the

Start/Pause button.

7. Press the timer button Startzeit verzögert

to set a later time for the machine to start.

By pressing the button several times a

start time of 1 to 24 hours can be set in

1-hour increments. To do so, follow the

steps 1 to5, then use the STARTZEIT

VERZÖGERT button to set the start time,

wait until the display shows the wash time

and then press the Start/Pause button. If

the preset time has elapsed, the washing

machine will automatically turn on and the

washing time will be shown in the display.

8. You can also create your own program

and save it under program point Mein

Programm (My cycle). Turn the program

selector to your desired program. Set the

required temperature, spin speed and special

functions. Then press the SCHLEUDERN

button for 3 seconds to save the settings.

The program remains stored and can be

changed at any time as described above.

Caution

The door may only be opened if the

appliance is not running, e.g. after a program

has ﬁnished. Do not try to open the door

while the appliance is running.

Note:

The appliance is equipped with a humidity

sensor to measure the moisture in the drum

or appliance. The residual time for drying is

determined by the weight of the inserted

clothes and the measured moisture.

9. For drying clothes washed elsewhere or

wet clothes chose the program Trocknen

(drying) and start it with the Start/Pause

button.

IM_KWDR 8622 B INV_10712 B INV_201120_V07_HR.indb 35IM_KWDR 8622 B INV_10712 B INV_201120_V07_HR.indb 35 20/11/2020 11:45 AM20/11/2020 11:45 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KWDR 8622 B INV in the language / languages: English, German as an attachment in your email.

The manual is 3.32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Koenic KWDR 8622 B INV Manual

Product: