782839
25
Zoom out
Zoom in
Previous page
1/36
Next page
25
English
Installation
Note:
The washer-dryer is equipped with power
cord and plug and needs sewage and
tap water connection. Make sure before
installation that a wall outlet, sewage and
tap water connection are available at the
desired place of installation.
Consider the dimension (chapter Technical
data) of the product for placing and
installation.
Caution
• Before initial operation the transport
restraints must be removed from the
backside of the unit. Operating the
washer-dryer with mounted transport
restraints leads to serious damages.
• Keep the transport restraints for later
use. Never transport the device without
correctly mounted transport restraints!
Fig. 1Loosen the four transport restraints
with a wrench (13 mm) and unscrew
them completely. Insert the 4 supplied
blind plugs in the holes.
Fig. 2Place the appliance on an even,
horizontal and steady surface. For
levelling the feet are adjustable and can
be screwed in or out.
• Unscrew the lock nuts with a open-
end wrench (17 mm).
• Turn the feet to the right to screw
them in and to the left to unscrew
them.
• Use a spirit level to check
whether the appliance is leveled.
If the appliance is not standing
horizontally or is tilting the feet
must be adjusted again.
• If the unit is leveled and does not
tilt, tighten the nuts with the open-
end wrench.
Fig. 3The washer-dryer must be connected
to a drain.
• The drain hose is already fixed to the
sewage connection. Pull the hose
out of the clamps and unwind it.
• Connect the other end to the
drainpipe (Option B, hose end at
least 60cm high) or place the end
of the hose in a sink or washbasin
(Option A, end of hose at a maximum
height of 100cm).
Note:
Suitable hose holders are available as
optional accessories.
IM_KWDR84612_180730_V06_HR.indb 25 30/7/18 10:25 am
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenic KWDR 84612 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KWDR 84612 A in the language / languages: English, German as an attachment in your email.

The manual is 4.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info