782638

Koenic KVR 21621 Manual

13
Zoom out
Zoom in
Previous page
1/74
Next page
13
English
Warning!
When the vacuum cleaner is left standing, it
must be switched o, because if the brush
is turning while the product is standing , it
could cause damage to the floor surface.
After vacuuming, press the on / o switch to
turn o the product.
Cleaning and care
Warning!
• When cleaning the product, never use
solvents or abrasive materials, hard
brushes, metallic or sharp objects.
Solvents are harmful to human health and
can attack plastic parts, while abrasive
cleaning mechanisms and tools may
scratch the surface(s).
• Never immerse any electrical parts of the
product in water or in other liquids during
cleaning. Never place it under running
water.
Emptying dust container and cleaning
filters
Note: The dust container should be emptied
every time after vacuuming.
Fig. 8To empty the dust container, press the
dust container lid release button so
that the bottom lid of the container
opens and the dust falls out. Hold the
dust container over a dustbin. If the
filter and dust container are relatively
clean, close the lid again so that it
snaps into place. The vacuum cleaner is
ready for use.
Fig. 9For better cleaning, loosen the dust
container and remove it. Remove the
complete filter element and the fine
filter. Empty the dust from the dust
container and tap the filters. The filter
element and dust container can also
be rinsed with water if completely
dried afterwards. When cleaning the
elements with water, make sure that
they are completely dry before re-
assembly.
Mount all previously removed
components. The assembly is done
in reverse order. First press the dust
container into the socket on the motor
housing and afterwards into the socket
on the switch so that it engages. When
assembling make sure that no seal is
lost or crushed and that no parts are
jamming.
Cleaning floor nozzle
Fig. 10 The floor nozzle should be cleaned at
regular intervals. To clean it, release the
floor noozle from the handstick vacuum
cleaner. Push the clip to remove the
latch.
Take out the brush roller from the
nozzle. Cut through threads and hairs
wounded round the rollers using
scissors and remove them.
Note: If the wheels are blocked with threads
and hairs, use scissors to carefully remove
the blockage.
Re-assemble all of the components that have
previously been removed. Assembly is carried
out in reverse order.
IM_KVR21621_200516_V04_HR.indb 13IM_KVR21621_200516_V04_HR.indb 13 16/6/2020 9:53 AM16/6/2020 9:53 AM
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenic KVR 21621 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KVR 21621 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 3.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info