782633
17
Zoom out
Zoom in
Previous page
1/66
Next page
17
English
Cleaning and care
Warning!
• When cleaning, never use solvents or
abrasive materials, hard brushes, metallic
or sharp objects. Solvents are harmful to
human health and can attack plastic parts,
while abrasive cleaning mechanisms and
tools may scratch the surface(s).
• Never immerse any electrical parts of the
product in water or in other liquids during
cleaning. Never place it under running
water.
Emptying the dust canister (Part O)
Fig. 15 If the suction power diminishes, the dust
canister must be emptied and the filters
must be cleaned. We recommend to
empty the dust canister outside of the
house.
a) Remove the suction hose from the
dust canister. Press the unlocking
device and remove the filter by bringing
it forward.
b) To empty the dust canister, simply
press the release on the bottom so
that the bottom of the canister opens
and the dust falls out. Hold the dust
canister over a rubbish container whilst
you are emptying it.
c) Loosen the filter lid and remove the
entire filter insert from the dust
canister. Empty the remain dusty from
the dust canister.
d) Re-assemble all of the components
that have previously been removed.
Assembly is carried out in reverse order.
Cleaning the main filter
Fig. 16 a) Loosen the filter lid and remove the
entire filter insert from the dust
canister. Break down the filter into all
of its individual parts. Tap the filter to
remove the dust and clean all parts
with water and dry them thoroughly.
b) Re-assemble all of the components
that have previously been removed.
Assembly is carried out in reverse
order.
Cleaning the motor filter
Fig. 17 Remove the motor filter and tap it
to remove the dust. Then re-insert it.
Reassemble all of the components
that have previously been removed.
Assembly is carried out in reverse order.
Warning!
Never use the vacuum cleaner without a
motor filter, as otherwise, the motor will soon
get dirty and will be subject to wear. If the
motor filter gets dirty, the suction power will
diminish.
Cleaning the exhaust air filter
Fig. 18 Open the flap, take the filter out and
tap it to remove the dust. Assembly is
carried out in reverse order. Insert the
filter in the right direction so that the
correct side is facing the motor.
Technical data
Rated Voltage : 220 - 240 V~, 50/60 Hz
Rated input power : 700 W
Protection class : II
• This is a general purpose vacuum cleaner
• The Erp test method is according to (EU)
No 666/2013, (EU) No 665/2013 & EN
60312:2013
• Please refer to below website for detail
technical information, or contact us for
technical document:
www.koenic-online.com
IM_ KVC3121A_160426_V02_HR.indb 17 26/4/16 2:09 PM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenic KVC 3121 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KVC 3121 A in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 4.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info