Manual Koenic KSH 4220 WD (page 13 of 74) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish)

782884

Zoom out

Zoom in

1/74

English

Cleaning and care

Warning

When cleaning, never use solvents or abrasive

materials, hard brushes, metallic or sharp

objects. Solvents are harmful to human health

and can attack plastic parts, while abrasive

cleaning mechanisms and tools may scratch

the surface(s).

• After every use, please use the cleaning

brush to thoroughly brush and blow out hair.

• Press the shaving head release on both

sides and remove the shaving head.

• The shaving head can also be rinsed under

running water. But then you have to dry

it well.

• Gently tap or blow out the shaving head.

Use the cleaning brush to clean the two

blade blocks and the housing underneath.

• Place the shaving head on the shaver so

that it clicks in place on both sides.

• Clean the product’s exterior surfaces with

a slightly damp cloth and then dry them

thoroughly.

• Make sure that no water enters the

product interior (for example, through the

on/o button). Keep the product in a dry,

cool location which is protected against

moisture and direct sunlight. Keep this

product out of the reach of children.

Wet shaving

• Wetting your face and apply thin layer

shaving foam to the parts of your face

which shall be shaved.

• Follow steps as given above in chapter

Shaving.

Note

Only proper shaving foam may be used with

the razor, as shaving gel will gum up the

shaving head and impair the result.

5Hair trimmer

The hair trimmer on the back of the device

allows the cutting of sideburns for example.

• Slide the hair trimmer on the back of the

unit all the way up until it clicks into place.

• Switch on the device with the on/ o

button.

• Carefully guide the hair trimmer to the

ends of the hair to be trimmed and cut the

desired shape.

• After use, switch o the device with the

on/ o button and push the hair trimmer

back down until it clicks into place.

Using the switch lock

• Push and hold the on/o switch for more

than 3 seconds to lock the on/o switch. The

battery and plug symbols will ﬂash three times

and indicate the switch lock is activated.

• To unlock the on/o switch push and hold it

for more than 3 seconds again. The shaver will

switch on automatically. Push the on/o switch

again to switch o the shaver. Connecting the

shaver to the power supply as given in chapter

Preparation will also deactivate the on/o

switch lock.

IM_KSH4220WD_180803_V07_HR.indb 13 3/8/18 5:12 pm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KSH 4220 WD in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 6.86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Koenic KSH 4220 WD Manual

Product: