782873
21
Zoom out
Zoom in
Previous page
1/111
Next page
21
English
Wash all components except the motor
housing with warm water and washing-up
liquid, and then rinse them thoroughly with
clean water. Clean the motor housing with
a slightly damp cloth and dry it thoroughly
afterwards.
Carefully dry all components after each
cleaning.
Put all the previously cleaned and dried
parts back together. Please note the
relevant points in the Using the ice cream
maker section.
Never use solvents, abrasives, hard brushes,
metallic or sharp objects for cleaning.
Solvents are harmful to health and attack
plastic parts; abrasive cleaners and
auxiliaries scratch the surface.
Cleaning and care
Caution
Never immerse electrical parts of the device
in water or any other fluids during cleaning
or operation. Never hold the device under
running water. Never use solvents and
abrasives, hard brushes, metallic or sharp
objects for cleaning. Solvents are harmful
to your health and attack the plastic parts.
Abrasive cleaners and tools do scratch the
surface.
Fig. 9Remove lid and ice cream container
and pull out the mixer insert.
Troubleshooting
If there are any problems during operation, please refer to the following table. If problems cannot
be solved as indicated under Solution, please contact your manufacturer.
Problem Possible causes Solution
Product does not work Interrupted power supply Check the power supply
After the ice cream is
finished, the ice cream
container is not easy to take
out.
There are some frozen water
droplets between the ice cream
container and cooling barrel.
Wait for 1-2 minutes
before removing the ice
cream container. When
inserting the ice cream
container, make sure it’s
dry.
Ice cream production time
is not completed, but the
stirring has stopped
Normal phenomenon, as the
ice cream hardens, the stirring
blade may be stuck, and when
temperature increases the motor is
stopped to avoid damages.
Take out the ice cream
container. Turn of the
device and wait a while to
restart.
The lid is lifted and the mixer
insert is not fix in place.
The mixing insert is not correctly
in place, pay attention to the
alignment of the hexagon socket.
Place the mixing insert
correctly in place.
The ice cream container
cannot be placed into the
cooling barrel
Improper use of the ice cream
container causes deformation.
Contact your service
center.
When the ice cream was
first made, the mixing insert
was severely scratched or
stuck.
Improper use of the ice cream
container causes deformation.
Contact your service
center.
IM_KIM91221B_201216_V03_HR.indb 21IM_KIM91221B_201216_V03_HR.indb 21 16/12/2020 17:4416/12/2020 17:44
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenic KIM 91221 B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KIM 91221 B in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 4.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info