603813
16
Zoom out
Zoom in
Previous page
1/62
Next page
16
English English
Operation
1
Connecting to power: Connect the power
plug to a suitable electrical outlet.
2
Unlocking appliance: Push the lock
switch to the power cord side.
3
Switching appliance on: Press the on/o
button for 2 seconds.
The ceramic plates start to heat up and the
default temperature of 140 °C appears on
the display for a moment.
4
Adjust the ceramic plates’ temperature
between 140 °C and 220 °C in increments
of 10 °C by pressing the temperature
buttons:
Button Temperature
+ increase temperature
(max. 220 °C)
decrease temperature
(min. 140 °C)
The current temperature setting is shown
on the display, as the temperature buttons
are pressed.
Note
The appliances switches itself o after
30 minutes if it has not been switched o
manually already
5
Switching appliance o: Press the
on/o button for 2 seconds. The display
goes o.
6
After use: Unplug the appliance and place
it on a heat-resistant surface to let it cool.
Locking appliance (button lock): Push
the lock switch to the display side.
Straightening
Caution
Make sure your hairs are completely dry
before using the appliance.
7
Comb your hairs through with a wide
toothed comb (not provided) to remove
tangles.
8
Starting close to the roots, take a thin
section of hairs (strands of max. 3 – 4 cm)
and clamp.
Danger of burns! Parts of the appliance
become very hot during use. Hold the
appliance by its handle only.
Note
During operation, the built-in ioniser makes
your hair shinny and frizz-free.
9
Gently run the appliance through the entire
length of the hairs, slowly and steadily,
from roots to the ends without stopping
for longer than 4 to 5 seconds. This will
ensure best straightening results without
damaging your hairs.
Creating flicks
10
You can create flicks at the hair ends
by slowly turning the appliance either
outwards or inwards before releasing a
strand.
IM_KHS 402P_150409_V01.indb 16 9/4/15 4:55 pm
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenic KHS 402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KHS 402 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info