782832
22
Zoom out
Zoom in
Previous page
1/138
Next page
22
English
8 Remove the hinge part with the door stop
at the bottom of the door. Take the supplied
new hinge part with door stop and fix it to
the other side of the door. Make sure that
the hinge part is correctly seated in the
designated recess.
9 Loosen the three screws on the lower
hinge plate and remove it. If necessary tilt
the refrigerator to get better access to the
bottom side.
10
Unscrew the hinge pin and screw it back
into the thread next to it.
11
Unscrew the single foot on the left and
screw it on again on the right.
12
Position the hinge plate on the left side so
that holes and tapped holes are aligned.
Tighten the hinge plate properly.
13
Place the door on the lower hinge pin.
14
Keep the door in position. Take the
additional upper hinge provided and insert
the hinge pin into the corresponding hole in
the upper side of the door. Hold the hinge
plate in position and screw it on.
15
Remove the switch from the right-hand cap
and insert it into the supplied left-hand cap.
Connect the plugs and sockets. With the
door open, attach the supplied left cover
cap to the hinge so that it snaps into place
at all corners and edges, and fix it to the
refrigerator with the screw. Make sure, that
you do not damage the cables.
Installing the door handle
16
Remove the two blind plugs at the desired
side of the door.
17
Screw on the handle with provided screws.
18
Clip the two provided caps onto the screws.
Caution
After you have placed the freezer upright
on its feet, wait for 24 hours before you
connect it to the mains to permit the cooling
system to regain full capacity.
Energy saving tips
Do not place the product in the vicinity of a
heat source (radiator or kitchen stove, etc.).
Ensure unobstructed air flow around the
refrigerator and freezer.
If a layer of ice has built, defrost the unit. A
thick layer of ice aects the transmission of
the cold, thus the energy consumption will
be increased.
When opening and taking out food, only
open the door shortly. A shorter door
opening time causes less ice to deposit on
the freezer walls.
Select the temperature regulator setting
according to the filling amount of the
product.
Use drawers, baskets or shelves to store the
food. If the energy of the product is used
eciently, the energy consumption can be
minimized.
It’s advised not to remove the provided
accessories, such as drawers, shelves
balconies, as this might increase the energy
consumption, due to inecient storage of
food.
KFZ 611 E NF_201202-1M_V05_HR.indb 22KFZ 611 E NF_201202-1M_V05_HR.indb 22 2/12/2020 10:38 AM2/12/2020 10:38 AM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenic KFZ 611 E NF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KFZ 611 E NF in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 4.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info