Manual Koenic KDW 60031 A2 FI (page 29 of 34) (English, German)

782789

Zoom out

Zoom in

1/34

English

Operation

Washing dishes

Fig. 8Consider following steps to start the

washing process:

1. Prepare dishwasher.

2. Load the dishwasher basket.

3. Add detergent or rinse aid.

4. Make sure the water-tap/water

supply is open and the appliance is

connected to the mains.

5. Push the on/o switch for approx.

1 second to turn on the dishwasher

and choose your program by referring

to chapter Choosing Program.

Note:

If only one basket is used you can

switch o the unused rinsing zone.

Press the rinse zone selection

button to select the desired

rinse zone. Observe the indicators

or .

If you use a 3in1 dishwashing

detergent (detergent plus rinse

aid and softener), select the

appropriate additional function by

pressing the 3in1 button . The

corresponding indicator light

lights up. The 3in1 feature can be

enabled on all programs except

Rapid and AUTO.

6. Close the door to start dishwashing.

• When water is running, the water

connection indicator light turns

on.

• Open the door to pause the

dishwashing process.

7. To start the washing process at a

later time, press the timer button

and by pressing it several times set

the hours by which the start is to

be delayed. 1-24 hours start time

delay can be set. Close the door. The

dishwasher starts the washing cycle

when the preset time has elapsed.

Note:

The program lights show the state

of the dishwasher:

• Program light on: standby or

pause.

8. When the washing cycle has ﬁnished,

the buzzer of the dishwasher will

sound for 8 seconds, then stop.

- Open the door of the dishwasher.

- Turn o the appliance using the

on/o button and shut o the

water supply.

Warning

It is dangerous to open the door

during an ongoing cycle, because

the hot water may scald you.

- Wait a few minutes before

unloading the dishwasher to avoid

handling the dishes and utensils

while they are still hot. They will

also dry better.

- Unload the dishwasher.

Modify the washing program

You can change the washing program when

the dishwasher has only been running for a

short time. Otherwise, the detergent may have

already been released, and the appliance may

have already drained the wash water.

• Open the door and the dishwasher will

pause.

• Press the Programme selection button P

for more than three seconds. Change the

program to the desired cycle setting.

• Close the door to continue the washing

process.

Note:

If you open the door during an ongoing cycle,

the machine will pause. When you close the

door, the machine will continue working after

10 seconds.

Pausing the washing cycle

• If you forgot a dish you can pause the

process and add it, but make sure the

detergent compartment has not already

opened.

1. Open the door a little to pause the

washing process.

2. After the spray arms came to a halt, you

can open the door completely.

3. Add forgotten dishes.

4. Close the door and the dishwasher will

continue.

IM_KDW 60031 A2 FI_180326_V05_HR.indb 29 26/3/18 12:08 pm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KDW 60031 A2 FI in the language / languages: English, German as an attachment in your email.

The manual is 22.52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Koenic KDW 60031 A2 FI Manual

Product: