782781

Koenic KDD 121 E NF - Side by Side Manual

23
Zoom out
Zoom in
Previous page
1/158
Next page
23
English
To turn o the auxiliary functions, unlock
the control panel again as described in the
Settings section and press the MODE button
repeatedly until none of the additional function
icons lights up. As a result, any additional
functions are deactivated and the device
operates at the preset temperatures.
Cold water and ice cube maker
Warning! Before drawing water and ice for
the first time, remove the cover with gasket
from the discharge opening on the inside of the
freezer door. If the cover is not removed, ice and
water will be ejected into the freezer.
If necessary, unlock the control panel and press
the button ICE OFF to switch the ice and cold
water function on or o.
Fig.
12
Press the DISPENSER button until the
corresponding symbol indicates the
desired function:
Ice cube extraction indicator : entire
ice cubes are dispensed;
Ice picking (shredded) indicator :
crushed ice is being dispensed;
Water indicator : cold water is
dispensed.
Fig.
13
Now press the drinking cup against the
dispenser stop to start the dispensing.
Remove the cup to stop dispensing.
Warning! Never reach into the
dispenser opening of the freezer door!
Note:
• During the ice cube or shredded ice
dispensing, dierent mechanical sounds
will be audible. This is normal and no
reason for complaint.
• The water and ice dispensing only works
when the freezer door is closed.
• If you have not taken cold water for
several days, pour the first few cups of
water away to avoid bacterial infections.
Door height adjustment
1 If the doors do not close properly or are
not aligned, the height can be adjusted.
2 Use the wrench provided (b) to loosen the
counter nut (c) and then adjust the height
of each door by turning the adjusting nut
(a) with the wrench (b). If the height is
correct and both doors are aligned, tighten
the counter nut (c) again.
Energy saving tips
• Do not place the product in the vicinity of a
heat source (radiator or kitchen stove, etc.).
• Ensure unobstructed air flow around the
refrigerator and freezer.
• If an ice layer has built, defrost the unit. A
thick ice layer aects the transmission of the
cold, thus the energy consumption will be
increased.
• When taking out food, only open the door
shortly. A shorter door opening time causes
less ice to deposit on the freezer walls.
• Select the temperature regulator setting
according to the filling amount of the
product.
• Use drawers, baskets or shelves to store the
food. If the energy of the product is used
eciently, the energy consumption can be
minimized.
• It’s advised not to remove the provided
accessories, such as drawers, shelves
balconies, as this might increase the energy
consumption, due to inecient storage of
food.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenic KDD 121 E NF - Side by Side at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KDD 121 E NF - Side by Side in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 5.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info