782558
27
Zoom out
Zoom in
Previous page
1/98
Next page
27
English
• When the ambient temperature is higher
(Cooling mode) or lower (Heating mode) than
the set temperature, the power management
indicator turns o. The compressor and motor
starts again.
Note:
• Every press of a button on the control
panel and every successfully transmitted
signal from the remote control is
confirmed by an audible signal.
• All function of the product can be
controlled via the control panel or the
remote control, with exception of the
display illumination LED and SHORTCUT
buttons, which are to be found exclusively
on the remote control.
Mode
Mode Application
Auto Auto-
matic
mode
•products selects the
suitable mode to achieve
the set temperature
•fan speed is controlled
automatically
•temperature can be
adjusted
Cool Cooling
mode
•cools down the room
temperature
•the compressor runs and
stops in order to maintain
the set temperature
•fan speed and set
temperature can be
adjusted
Dry Dehu-
midify-
ing
mode
•dehumidifies the room
with the fan
•fan speed and set
temperature cannot be
adjusted
Fan Fan
mode
•fan only
•fan speed can be adjusted
•temperature cannot be
adjusted
Indicators
Control
panel
Remote
control Function
Timer On Automatic on
activated
Timer O Automatic o
activated
Dry Operating in de-
humidifying mode
Fan Operating in fan
mode
auto Auto Operating in auto
mode
Cool Operating in
cooling mode
Heat Function not
provided
Unit indicator
Power manage-
ment indicator *
FAN High fan speed
FAN Medium fan
speed
FAN Low fan speed
FAN Auto Fan speed set to
Auto
Sleep mode on/
o
/ — Product on/
standby
Transmitting
signal
* Power management indicator
• When the ambient temperature is lower
(Cooling mode) or higher (Heating mode)
than the set temperature, the compressor
and fan motor stops and the power
management indicator illuminates.
Remote control
Fig. 6 Remove the battery compartment cover.
Insert 2 batteries (type R03/ AAA) while
paying attention to the correct polarity.
Close the battery compartment. Using
the control panel and the remote control
alternately might lead to a misalignment
of the product and the information
displayed on the remote control.
Note:
• Press any button on the remote control
and the product adopts the current
setting from the remote control.
• The signals of the remote control will
be transmitted with a short delay after
a button is pressed. This process is
indicated by the appearing symbol on
the remote control display.
• Every press of a button on the remote
control will illuminate the display on the
remote control for a few seconds for
better visibility in the dark.
Control
panel
Remote
control Function
ON/OFF Switch on or standby.
+TEMP Increase value, e.g.
temperature or timer
TEMP Decrease value of
temperature or timer
MODE MODE Mode selection button
FAN FAN Fan speed selection
button
SLEEP SLEEP Sleep mode on/o
SWING SWING Fan outlet oscillation
on/o
LED Display and indicator
lights on/o
TIMER
on
off
+
TIME
OFF
Adjust switch standby
time
TIME
ON Adjust switch on time
SHORT
CUT
Choose preset mode
and temperature
IM_KAC3231_KAC3351_180206_V06_HR.indb 27 6/2/18 9:28 am
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenic KAC 3351 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KAC 3351 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info