456679
22
Zoom out
Zoom in
Previous page
1/73
Next page
CVS-128
Chapter 1 Basic Operation
0093112802-00 1-9
Caution: When only high frequency is
displayed, no gain adjustment at low
frequency is available. When only low
frequency is displayed, no gain
adjustment at high frequency is
available.
Selecting the auto gain
When the [Cruising] or [Fishing] is set, the gain
can be fine-adjusted.
1
Press [GAIN (HF) Knob] twice, and [Gain
select] is displayed. (The high frequency is
explained below.)
Caution: The low frequency can be set by
[GAIN (LF) Knob].
2
Select the [Cruising] or [Fishing] by rotating
the [Knob].
3
Press the [MENU] key to close the menu.
When the [Cruising] is set, the [L: AC] [H:
AC] is displayed at the upper side of menu.
When the [Fishing] is set, the [L: AF] [H: AF]
is displayed at the upper side of menu.
Adjusting the gain by auto
The auto gain adjustment can be set to [Auto
adjust high] or [Auto adjust low]. (Setting:-10 ~
10)
1
Turn [GAIN (HF) Knob], and [Auto adjust
high] is displayed. (The high frequency is
explained below.)
Caution: The low frequency can be set by
[GAIN (LF) Knob].
2
Fine-adjust the gain by rotating the [GAIN
(HF) Knob]. The [Cursor
]
key menu position
can be moved.
3
Every time when pressing the [Gain select]
and [Auto adjust high] are alternately
displayed.
4
Press the [MENU] key to close the menu.
Selecting the manual gain
Adjustment of gain can be done manually.
1
Press [GAIN (HF) Knob] twice, and [Gain
select] is displayed. (The high frequency is
explaied below.)
Caution: The low frequency can be set by
[GAIN (LF) Knob].
2
Select the [Manual] by rotating the [Knob].
3
Press the [MENU] key to close the menu.
Manual adjustment of the gain
When the image of High frequency only is
displayed on the display, the High frequency gain
can be adjusted. (Setting: 0 ~ 10)
When the image of Low frequency only is
displayed on the display, the Low frequency gain
can be adjusted.
Caution: If you increase the gain too much,
noise will appear on the entire image,
resulting in an unclear image. Adjust
properly the gain so that the optimum
image can be always displayed.
Over-gain
Under-gainOptimum
1
Turn [GAIN (HF) Knob] to display [Auto
adjust high]. (The high frequency is
explained below.)
Caution: The low frequency can be done
by [GAIN (LF) Knob].
2
Adjust the gain by rotating the [Knob]. The
[Cursor
]
key menu position can be moved.
Stop increasing of the gain just before noise
appears on the image.
3
Every time when pressing the [Gain select]
and [Gain (H)] are alternately displayed.
Auto adjust high
0
Gain select
Manual
Cruising
Fishing
Gain(H)
6.0
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koden Si-tex CVS-128 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koden Si-tex CVS-128 in the language / languages: English as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info