indicates that the camera is out of control of the remote control at the moment.
indicates that the remote control is under the control of one camera at the moment.
indicates that one remote control controls multiple cameras at this time.
It indicates that the camera has been set at this channel.
In case of successful pairing between the camera and the remote control (the camera is capable of memorizing the remote control paired
successfully last time):
1. If the camera is powered off, the camera is powered on and start recording by pressing the button on the remote control.
2. The camera is powered on or whether the remote control is paired successfully is tested by pressing the button. The camera will be powered off by pressing and
holding the button (more than 1.5 seconds).
3. When the button on the remote control is pressed to start recording or shooting, the camera works with the current setting of the remote control.
If the camera has been powered off for more than 6 hours, it is impossible to power on the camera directly with remote control.
Indicator lamp status description:
1. If pairing succeeds, the signal indicator lamp turns green.
2. If pairing fails, the signal indicator lamp turns red.
3. During remotely controlled recording or shooting, the shooting status indicator lamp turns orange. When using "Multi Control", the shooting status indicator lamp will not
illuminate.
4. When the battery level of the camera is less than 25% or the memory card is full, the battery/memory card indicator lamp turns red.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Kodak SP360 4K EXTREME at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Kodak SP360 4K EXTREME in the language / languages: English as an attachment in your email.
The manual is 10,37 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
