585685
21
Zoom out
Zoom in
Previous page
1/144
Next page
www.kodak.com/go/aiosupport 15
KODAK OFFICE HERO 6.1 All-in-One Printer
Adding a wireless network connection to a USB-connected computer
You can change the way you connect to your printer at any time.
Changing from USB to a wireless connection
To change the printer connection type from USB to a wireless (Wi-Fi) network:
If your printer is connected to a computer with WINDOWS OS:
1. Disconnect the USB cable from your printer and computer.
2. On your computer, disable any firewall you have installed until you have
successfully completed the installation.
3. If you have not already done so, connect your printer to your wireless network.
See Connecting to a wireless network, page 7.
4. Select Start > All Programs > Kodak > KODAK Printer Setup Utility.
If your wireless all-in-one printer (example: KodakOFFICEHERO6.1+1002)
is not listed:
a. Select No, my printer is not listed, then click Next.
b. Select your printer from the list.
c. Select Network - Wireless/Wi-Fi, then click Next.
When your printer is detected, driver installation begins.
If your wireless all-in-one printer (example: KodakOFFICEHERO6.1+1002)
is listed:
a. Select the all-in-one printer that is connected to your network.
b. Select Yes, my printer is listed, then click Next.
When your printer is detected, driver installation begins.
5. When driver installation is complete, click Done.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakOFFICEHERO6.1+1002).
If your printer is connected to a computer with MAC OS:
1. Disconnect the USB cable from your printer and computer.
2. If you have not already done so, connect your printer to your wireless network.
See Connecting to a wireless network, page 7.
3. Select Apple > System Preferences.
4. Under Hardware, select Print & Fax or Print & Scan.
5. Click + in the dialog box.
6. Select your printer from the list.
7. Click Add, if required.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakOFFICEHERO6.1+1002).
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kodak OFFICE HERO 6.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kodak OFFICE HERO 6.1 in the language / languages: English as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info