212708
105
Zoom out
Zoom in
Previous page
1/108
Next page
A-61555 April 2009 6-13
Problem Possible Solution
Calibration has failed Make sure that:
you are using the proper calibration target and it is oriented correctly for
the type of calibration you are performing. The Image calibration target
and Ultrasonics calibration target are different.
the imaging guides are clean.
the transport is clear of obstructions.
the sensors are clean.
the calibration target you are using is clean.
If unsatisfactory image quality persists, call Service.
Documents are jamming Make sure that:
the guidelines for document preparation have been followed (e.g.,
staples, paper clips are removed; lead edges are aligned, etc.)
the output tray and side guides are adjusted for the length and width of
the documents being scanned.
all jammed documents have been removed from the transport area.
documents meet specifications for size and weight.
the sensors are clean.
the separation roller, feed module, and pre-separation pad are clean
and properly installed.
the transport rollers are clean.
the background strips are properly installed.
you have checked the feed module tires, separation roller tires and pre-
separation pad for signs of wear and replaced as needed.
Long documents are not feeding or are
jamming
Make sure that:
the input elevator extender is pulled out to provide support for long
documents.
the output tray is adjusted for the length of the documents being
scanned.
the output tray is installed properly.
document extenders are installed correctly.
Roller marks appear on the documents
after scanning
Clean the feed module tires, separation roller tires and transport rollers.
Vertical streaks appear on the image Make sure that:
imaging guides are clean.
the scanner was thoroughly cleaned before the last image calibration.
when you calibrate the scanner that you are using a good, clean
calibration target. Use the calibration target provided with your scanner.
If you are using iThresholding, reduce the Contrast value.
The Enhanced Printer is not printing as
desired
If you are having problems printing on scanned documents:
verify that the ink cartridge is not empty.
be sure the ink cartridge is properly installed.
be sure the ink cartridge is located in the correct position for printing.
make sure that the printer carrier is properly seated in its slot.
verify that all printer connectors are securely fastened and that the
ribbon cable is securely attached.
verify that the printer has been enabled through the host and that the
expected print string has been specified.
Image too small or has a black border
Clean the imaging guides. See Chapter 5, Maintenance.
Clean the scanner. See Chapter 5, Maintenance.
If using iThresholding, reduce the Contrast value.
Check for scratches on the black (or white) background strips. Replace
if necessary.
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kodak i1860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kodak i1860 in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kodak i1860

Kodak i1860 User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info