212626
38
Zoom out
Zoom in
Previous page
1/47
Next page
5-2 A-61560 January 2010
Problem Possible Solution
No images are being displayed
If you are scanning one-sided documents or are using a Kodak i1210
Plus or i1310 Plus Scanner, be sure the side you want to scan is facing
the input tray (not facing you). For more information, see the section
entitled, “Getting your documents ready to scan” in Chapter 3,
Scanning.
Images are not being cropped correctly
If the cropping options are enabled, Automatically Detect and
Straighten (Automatic), Automatically Detect or Border Reduction
(Aggressive) and your images are not being cropped correctly, clean
the imaging area. See the section entitled, “Cleaning the imaging area”
in Chapter 4, Maintenance.
Roller marks appear on the document
after scanning
Clean the rollers. See the procedures in Chapter 4, Maintenance.
Images have black background bleed-
through
When scanning translucent documents, black bleed-through may be
displayed on the image. To minimize this, adjust the Contrast value or
select Draft (Fixed) in TWAIN or Fixed Processing in ISIS to improve
the image or use the Kodak White Background Accessory.
Red, green or blue streaks are running
through a color photo
The scanner is dirty and needs to be cleaned. Refer to the “Cleaning
procedures” in Chapter 4, Maintenance.
Scanner is running slow
Your PC may not meet the minimum requirements for the scanner.
The scanner is rated and designed to operate with USB 2.0, but will
function in a USB 1.1 port. If you are using a USB 1.1 connection,
update your connection to USB 2.0.
Microsoft Windows operating systems - only
Cannot scan after Standby or Hibernate
with Microsoft Windows Vista
Upgrade to Service Pack 1 or higher.
Unable to scan using Microsoft Office
Document Imaging 2007 using the WIA
driver
Select the scanner named:
KODAK Scanner: i1210/i1220 or
KODAK Scanner: 1310/i1320
from the Scanner drop-down list.
Linux operating systems - only
The number of pages value is not
communicated to the SANE driver. The
number of pages is just presented as a
“tally” that the XSANE application uses
to count the number of images that are
captured
Set the Number of Pages value to a number that is larger than the
number of images that will be captured in a batch.
The LED on the scanner is red even
though the scanner is securely
connected to the PC
The LED will remain a steady red until your application connects to the
scanner.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kodak i1320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kodak i1320 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info