212627
38
Zoom out
Zoom in
Previous page
1/47
Next page
Safety
User Precautions
Place the scanner on a sturdy, level work surface capable of supporting 5.5 kg (12 lbs).
Do not install the scanner in a location subject to dust, humidity or steam. This may cause electrical shock or a fire. Only use
the scanner and power supply indoors in a dry location.
Make sure the electrical power outlet is located within 1.52 meters (5 feet) of the scanner and is easily accessible.
Use only the power cord that was provided with the scanner. Using any other power cord may cause electrical shock and/or
damage the product.
Be sure the power cord is securely plugged into the wall outlet. Failure to do so may cause electrical shock or fire.
Do not damage, knot, cut or modify the power cord. This may cause electrical shock or fire.
The scanner requires a dedicated power outlet. Do not use an extension cord or power strip with the scanner.
Use only the AC adapter that is supplied with the scanner; Model Tectrol NU60-C240250-13 or Model CWT CAE060242. Do
not use the scanner’s AC adapter with any other product.
Leave sufficient space around the power outlet so it can be easily unplugged in case of an emergency.
Do not use the scanner if it becomes inordinately hot, has a strange odor, emits smoke, or makes unfamiliar noises.
Immediately stop the scanner and disconnect the power cord from the power outlet. Contact Kodak Service.
Do not disassemble or modify the scanner or the AC power adapter.
Do not move the scanner with the power cord and interface cable attached. This may cause damage to the cord/cable.
Remove the power cord from the wall outlet before moving the scanner.
Follow the Kodak recommended cleaning procedures. Do not use air, liquid or gas spray cleaners. These cleaners displace
dust, dirt and debris to another location within the scanner, which may cause the scanner to malfunction.
Material Safety Data Sheets (MSDS) for chemical products are available on the Kodak website at: www.kodak.com/go/msds.
When accessing the MSDSs from the website, you will be required to provide the catalog number of the consumable you
want the Material Safety Data Sheet for. See the section entitled, “Supplies and consumables” later in this guide for supplies
and catalog numbers.
Environmental information
•The Kodak i1200/i1300 Plus Series Scanners are designed to meet worldwide environmental requirements.
Guidelines are available for the disposal of consumable items that are replaced during maintenance or service; follow local
regulations or contact Kodak locally for more information.
For disposal or recycling information, contact your local authorities or, in the USA, visit the Electronics Industry Alliance
website: www.eiae.org.
The product packaging is recyclable.
Parts are designed for reuse and recycling.
•The Kodak i1200/i1300 Plus Series Scanners are Energy Star compliant and are shipped from the factory with the default
time set to 15 minutes.
European Union
This symbol indicates that when the last user wishes to discard this product, it must be sent to appropriate
facilities for recovery and recycling. Please contact your local Kodak representative or refer to www.kodak.com/
go/recycle for additional information on the collection and recovery programs available for this product.
Acoustic emission
Maschinenlärminformationsverordnung – 3, GSGV
Der arbeitsplatzbezogene Emissionswert beträgt <70 dB(A).
[Machine Noise Information Ordinance — 3, GSGV
The operator-position noise emission value is <70 dB(A).]
Power system connection
This product is also designed for Norwegian IT power system with phase-to-phase voltage 230V.
EMC statements
United States: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of these measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment. Where shielded interface cables have been provided with the product or specified additional
components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to
ensure compliance with FCC regulation.
Korea: As this equipment has obtained EMC registration for household use, it can be used in an area including residential
areas.
Japan: This is a Class B product based on the standard of the Voluntary Control Council for interference by information
Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the instruction manual.
OVERVIEW 1-1
INSTALLATION 2-1
SCANNING 3-1
MAINTENANCE 4-1
TROUBLESHOOTING 5-1
APPENDICES
A-61560 January 2010 1-1
1 Overview
Contents Overview.........................................................................................1-1
Supporting documentation..............................................................1-2
Accessories.....................................................................................1-2
What’s in the box ........................................................................... 1-3
Scanner components......................................................................1-4
The Kodak i1200/i1300 Plus
Series Scanners are compact
document scanners perfect for
workgroups and other
decentralized applications. All
scanner models have a
feature that allows you to tilt
the scanner body and position
the input and output trays in a
variety of angles to meet your
scanning needs. Included with
each model is Smart Touch
functionality which allows you
to send your documents to email, print or various applications with a
touch of a button. The i1200/i1300 Plus Scanners also support the
optional Kodak A4 Flatbed Accessory or Kodak A3 Flatbed Accessory.
The i1200/i1300 Plus Series Scanners include these models:
Kodak i1210 Plus Scanner
Kodak i1220 Plus Scanner
Kodak i1310 Plus Scanner
Kodak i1320 Plus Scanner
NOTE: This User’s Guide provides information and procedures for the
Kodak i1200/i1300 Plus Series Scanners. The information in
this guide is for use with all scanner models unless otherwise
noted.
1-2 A-61560 January 2010
Supporting
documentation
In addition to this User’s Guide, the following documentation is also
available:
Installation Guide — provides a step-by-step procedure for installing
the scanner.
Scanning Setup Guides — the TWAIN Satasource and ISIS Driver
are included with the Kodak i1200/i1300 Plus Series Scanners. The
Scanning Setup Guides explain how to use basic image processing
features and is provided on the Installation CD in PDF format.
Smart Touch User’s Guide — provides information and procedures
on how to use Smart Touch functionality. This guide is provided on
the Installation CD in PDF format.
Reference Guide — provides easy visual steps for cleaning your
scanner. Keep this guide close to the scanner so you can use it as an
easy reference.
Accessories Kodak White Background Accessory — if you are scanning
translucent or very thin documents, this accessory will reduce black
background bleed-through while scanning which produces whiter
images. CAT No. 892 7717
Kodak A4 Flatbed Accessory — the Kodak A4 Flatbed adds
scanning capability for exception documents up to 8.5 x 11-inch (A4)
size paper to your Kodak i1200/i1300 Plus Series Scanner.
CAT No. 867 7288
Kodak Black Background Accessory for A4 Flatbed — this
flatbed cover can be used if you are scanning documents with
primarily a white background and you want a defined black border on
your images. CAT No. 863 6870
Kodak A3 Flatbed Accessory — the Kodak A3 Flatbed adds
scanning capability for exception documents up to 11 x 17-inch (A3)
size paper to your Kodak i1200/i1300 Plus Series Scanner.
CAT No. 179 6747
A-61560 January 2010 1-3
What’s in the box Before you begin open the box and check the contents:
Kodak i1210 Plus, i1220 Plus, i1310 Plus or i1320 Plus Scanner
Output tray
Optional output tray kit
USB 2.0 cable
Power supply
AC power cord bundles
Sample Cleaning Kit
Welcome Folio which includes:
- Installation CD
- Application CDs (includes: ScanSoft PaperPort and ScanSoft
OmniPage)
- Warranty/Registration sheets
- Printed User’s Guide, English
- Printed Maintenance Guide, English
- Installation Guide
- Service & Support Contact Information sheets
- Miscellaneous flyers
5-2 A-61560 January 2010
Problem Possible Solution
No images are being displayed
If you are scanning one-sided documents or are using a Kodak i1210
Plus or i1310 Plus Scanner, be sure the side you want to scan is facing
the input tray (not facing you). For more information, see the section
entitled, “Getting your documents ready to scan” in Chapter 3,
Scanning.
Images are not being cropped correctly
If the cropping options are enabled, Automatically Detect and
Straighten (Automatic), Automatically Detect or Border Reduction
(Aggressive) and your images are not being cropped correctly, clean
the imaging area. See the section entitled, “Cleaning the imaging area”
in Chapter 4, Maintenance.
Roller marks appear on the document
after scanning
Clean the rollers. See the procedures in Chapter 4, Maintenance.
Images have black background bleed-
through
When scanning translucent documents, black bleed-through may be
displayed on the image. To minimize this, adjust the Contrast value or
select Draft (Fixed) in TWAIN or Fixed Processing in ISIS to improve
the image or use the Kodak White Background Accessory.
Red, green or blue streaks are running
through a color photo
The scanner is dirty and needs to be cleaned. Refer to the “Cleaning
procedures” in Chapter 4, Maintenance.
Scanner is running slow
Your PC may not meet the minimum requirements for the scanner.
The scanner is rated and designed to operate with USB 2.0, but will
function in a USB 1.1 port. If you are using a USB 1.1 connection,
update your connection to USB 2.0.
Microsoft Windows operating systems - only
Cannot scan after Standby or Hibernate
with Microsoft Windows Vista
Upgrade to Service Pack 1 or higher.
Unable to scan using Microsoft Office
Document Imaging 2007 using the WIA
driver
Select the scanner named:
KODAK Scanner: i1210/i1220 or
KODAK Scanner: 1310/i1320
from the Scanner drop-down list.
Linux operating systems - only
The number of pages value is not
communicated to the SANE driver. The
number of pages is just presented as a
“tally” that the XSANE application uses
to count the number of images that are
captured
Set the Number of Pages value to a number that is larger than the
number of images that will be captured in a batch.
The LED on the scanner is red even
though the scanner is securely
connected to the PC
The LED will remain a steady red until your application connects to the
scanner.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kodak i1220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kodak i1220 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info