466552
95
Zoom out
Zoom in
Previous page
1/143
Next page
www.kodak.com/go/aiosupport 87
Kodak ESP 9 All-in-One printer
Upgrading the printer software - for Windows
You can upgrade the software and firmware for in your All-in-One printer with the
most recent release available. This requires an Internet connection.
NOTE: The firmware cannot be upgraded when your All-in-One printer is
connected via a network or Wi-Fi. Your All-in-One printer must be
connected to the computer with a USB cable in order to perform a firmware
upgrade.
1. If your connection is via Ethernet, disconnect the Ethernet cable. If your
connection is via Wi-Fi, press
Menu. Navigate to Network Settings menu and
press
OK. Select WIFI Radio off.
2. Connect the printer to the computer with a USB cable. The computer must be
connected to the internet.
3. A pop-up window appears at the bottom right corner of your computer monitor
stating “Found New Hardware KODAK ESP 9 AIO,” then it will change to “Found
New Hardware. Your new hardware is installed and ready to use.
4. Open the Kodak AiO Home Center.
5. Click the
Help button to open the Help Panel.
6. Under the General Links, click
Maintenance. If there is an update available, you
will receive a pop-up window or you can click on
Firmware Upgrade.
7. Click
OK to upgrade. The printer software will begin to load. Do not turn off your
printer while the update is in progress.
8. When the update is complete click
OK.
9. Close the maintenance window. The printer firmware is updated.
10. Next you will update the Home Center software, as well as the printer and
scanner drivers.
11. Under the
Web Links on the Help Panel, click on Check for updates.
12. If an update is available, download it to your computer.
13. When the update is complete, disconnect the USB cable and reconnect your
printer to the Ethernet or Wi-Fi network.
14. Use the
Windows Control Panel to delete the printer from your computer. The
USB printer is named: Kodak ESP9 AiO. This will remove the USB drivers.
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kodak ESP 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kodak ESP 9 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kodak ESP 9

Kodak ESP 9 User Manual - Dutch - 171 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info