466552
40
Zoom out
Zoom in
Previous page
1/143
Next page
Setting Up Your Printer
32 www.kodak.com/go/aiosupport
Switching the printer connection type
You can change the way you connect to your All-in-One printer at any time.
For Windows
USB to Wi-Fi
To convert the USB connection from a PC to a wireless network connection:
1. Disconnect the printer from the computer.
2. Use the Windows Control Panel to delete the printer from you computer.
3. Configure the wireless network from the printer front panel. See Configuring a
wireless network connection, page 25.
4. Press
Menu.
5. Press until
Network Settings is selected, and then press OK.
6. Select
View Network Configuration and confirm you have an IP address.
7. Run the Kodak Printer Network Setup Utility. This is located on the
Start > All
Programs > Kodak > Kodak Printer Network Setup Utility.
8. Select Connect via Network - Wireless / Wi-Fi, then click Next to proceed. The
printer should be detected and driver installations begin. If you have more than
one printer connected to your network, select the printer and then click
Next.
9. After the driver installation completes, click
Done to proceed.
10. The printer will be named Kodak ESP9-XXXX, where XXXX is a number unique
to your printer.
USB to Ethernet
To convert the USB connection from a PC to an Ethernet connection:
1. Disconnect the printer from the computer.
2. Use the Windows Control Panel to delete the printer from your computer.
3. Connect the printer to the network (LAN port on Router) with an Ethernet cable
4. Run the Kodak Printer Network Setup Utility. This is located on the
Start > All
Programs > Kodak > Kodak Printer Network Setup Utility
.
5. Select
Connect via Network - Ethernet cable, then click Next to proceed. The
printer should be detected and driver installations begin. If you have more than
one printer connected to your network, select the printer and then click
Next.
6. After the driver installation completes, click
Done to proceed.
7. The printer will be named Kodak ESP9-XXXX, where XXXX is a number unique
to your printer.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kodak ESP 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kodak ESP 9 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kodak ESP 9

Kodak ESP 9 User Manual - Dutch - 171 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info