466552
34
Zoom out
Zoom in
Previous page
1/143
Next page
Setting Up Your Printer
26 www.kodak.com/go/aiosupport
What you need to know before you connect
To connect your ESP 9 All-in-One printer to a wireless network, you will need the
following:
A laptop or desktop computer equipped with a network interface card or
wireless networking support, and the Kodak software installed
A working 802.11 wireless network. Kodak recommends that you use a wireless
access point/router that uses Dynamic Host Configuration Protocol (DHCP)
Internet access (preferably Broadband access such as cable or DSL)
Your network name (SSID). You can obtain your SSID from the wireless router or
the access point using the router’s embedded web server. See the
manufacturer’s documentation provided with your wireless system for more
information.
Your WEP key or WPA passphrase. You can obtain your WEP Key or WPA
passphrase from the wireless router or the access point using the router’s
embedded web server
Your network security string, if applicable
Disable your firewall or accept the firewall prompts to allow installation
If you are unsure about any of the items listed above, please contact your network
administrator or your internet provider for assistance.
Configuring basic wireless (Wi-Fi) settings
NOTE: You will need to know the network name (SSID) of the Wi-Fi network, and its
security string to connect your printer to the network successfully. Contact
your Internet provider or the person who helped you configure your network
to assist you.
CAUTION:
If there is an Ethernet cable plugged in to the Ethernet port on the back of the
printer, unplug it before starting this task.
1. From the control panel, press
Menu.
2. Press until
Network Settings is selected, and then press OK.
3. If the message states
Turn Wi-Fi Radio On, press OK. If the message states Tur n
Wi-Fi Radio
Off, move to the next step.
4. As needed, press , , or to view or configure an item, and then press
OK.
Network Settings options
If the printer has not been configured to connect to the Wi-Fi network or the printer
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kodak ESP 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kodak ESP 9 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kodak ESP 9

Kodak ESP 9 User Manual - Dutch - 171 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info