585590
35
Zoom out
Zoom in
Previous page
1/38
Next page
KODAK EKTAGRAPHIC III Slide Projector 31
Appendix A
Special-Application Receptacle Identification Chart
Contacts Function Description
1 & 3 Zero-Position Switch
(Models A and E Plus) Connects to an internal single-pole single-throw normally
open switch. Contacts are closed when the slide tray is at any
position other than zero. These leads connect only to the
switch terminals.
Do not exceed a switching load of 1 A at
30 V ac
.
4 & 5 Shutter Switch Connects to an internal single-pole single-throw normally
closed switch. Contacts are open when a slide is in the
projector gate and the shutter is open. These leads connect
only to the switch terminals.
Do not exceed a switching load
of 1 A at 30 V ac
.
7 & 8 Low-Voltage Supply For operating external equipment. The current is supplied by
a secondary winding on the main motor, isolated from the
line-voltage power, and is available whenever the main
projector motor is running. Supply is 25.5 V, 500 mA (1/2 A)
maximum. Contact number 8 is common (return) for the
remote-control circuit. Contact number 7 is the “hot” lead and
is fused with a slow-blowing fuse. (Replacement requires
disassembly of the projector by a qualified technician.)
6 & 8 Forward Tray Connects to the forward tray-advance circuitry in the
projector. These contacts are connected internally to the
remote-control receptacle and an electrical connection made
at either receptacle will result in a forward cycle.
2 & 8 Reverse Tray Cycle Connects to the reverse tray-advance circuitry in the
projector. These contacts are connected internally to the
remote-control receptacle and an electrical connection made
at either receptacle will result in a reverse cycle.
Shell Plug Ground If a plug with a conducting shell is used, it is connected to the
projector frame (chassis) through the special-application
receptacle and to earth ground through the projector's power
cable.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kodak EKTAGRAPHIC III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kodak EKTAGRAPHIC III in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info